Part Details for STLVDS32BDR by STMicroelectronics
Results Overview of STLVDS32BDR by STMicroelectronics
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (7 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Computing and Data Storage
Healthcare
Medical Imaging
STLVDS32BDR Information
STLVDS32BDR by STMicroelectronics is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for STLVDS32BDR
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
497-2148-1-ND
|
DigiKey | IC TRANSCEIVER 0/4 16SO Min Qty: 1 Lead time: 12 Weeks Container: Cut Tape (CT), Tape & Reel (TR) |
1818 In Stock |
|
$1.9688 / $3.9500 | Buy Now |
|
|
Bristol Electronics | 2413 |
|
RFQ | ||
|
|
Quest Components | QUAD LINE RECEIVER, PDSO16 | 578 |
|
$2.0044 / $5.0109 | Buy Now |
Part Details for STLVDS32BDR
STLVDS32BDR CAD Models
STLVDS32BDR Part Data Attributes
|
|
STLVDS32BDR
STMicroelectronics
Buy Now
Datasheet
|
Compare Parts:
STLVDS32BDR
STMicroelectronics
QUAD LINE RECEIVER, PDSO16, SOP-16
|
| Pbfree Code | Yes | |
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | STMICROELECTRONICS | |
| Part Package Code | SOIC | |
| Package Description | SOP-16 | |
| Pin Count | 16 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | STMicroelectronics | |
| Input Characteristics | DIFFERENTIAL | |
| Interface IC Type | LINE RECEIVER | |
| Interface Standard | EIA-644; TIA-644 | |
| JESD-30 Code | R-PDSO-G16 | |
| JESD-609 Code | e4 | |
| Length | 9.9 mm | |
| Moisture Sensitivity Level | 3 | |
| Number of Functions | 4 | |
| Number of Terminals | 16 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Low Current-Max | 0.008 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP16,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 3.3 ns | |
| Receiver Number of Bits | 4 | |
| Seated Height-Max | 1.75 mm | |
| Supply Current-Max | 18 mA | |
| Supply Voltage-Max | 3.6 V | |
| Supply Voltage-Min | 3 V | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | YES | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 3.9 mm |
Alternate Parts for STLVDS32BDR
This table gives cross-reference parts and alternative options found for STLVDS32BDR. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of STLVDS32BDR, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| SN65LVDS3486DR | Texas Instruments | $1.7204 | Quad LVDS receiver 16-SOIC -40 to 85 | STLVDS32BDR vs SN65LVDS3486DR |
| SN65LVDS32BD | Texas Instruments | $2.3631 | Quad LVDS receiver with -2 to 4.4-V common-mode range 16-SOIC -40 to 85 | STLVDS32BDR vs SN65LVDS32BD |
| SN65LVDS3486DG4 | Texas Instruments | $2.6252 | Quad LVDS receiver 16-SOIC -40 to 85 | STLVDS32BDR vs SN65LVDS3486DG4 |
| PI90LV048AW | Pericom Semiconductor Corporation | Check for Price | Line Receiver, 4 Func, 4 Rcvr, CMOS, PDSO16, SOIC-16 | STLVDS32BDR vs PI90LV048AW |
| SN65LVDS32AD | Texas Instruments | Check for Price | High-Speed Differential Receivers 16-SOIC -40 to 85 | STLVDS32BDR vs SN65LVDS32AD |
| SN65LVDS3486AD | Texas Instruments | Check for Price | High-Speed Differential Receivers 16-SOIC -40 to 85 | STLVDS32BDR vs SN65LVDS3486AD |
| STLVDS3486BDR | STMicroelectronics | Check for Price | QUAD LINE RECEIVER, PDSO16, SO-16 | STLVDS32BDR vs STLVDS3486BDR |
STLVDS32BDR Frequently Asked Questions (FAQ)
-
STMicroelectronics provides a recommended PCB layout in the application note AN2352, which includes guidelines for component placement, routing, and thermal management to ensure optimal performance and reliability.
-
The STLVDS32BDR has a thermal pad that must be connected to a thermal ground plane on the PCB to dissipate heat. A thermal interface material (TIM) can be used to improve heat transfer. The application note AN2352 provides more details on thermal management.
-
The maximum cable length supported by STLVDS32BDR depends on the specific application and the type of cable used. As a general guideline, STMicroelectronics recommends keeping the cable length below 10 meters to ensure reliable operation. However, longer cable lengths may be possible with proper signal conditioning and termination.
-
The STLVDS32BDR is designed to operate with a 3.3V supply voltage, but it can tolerate a range of 3.0V to 3.6V. However, operating the device outside of the recommended voltage range may affect its performance and reliability. Consult the datasheet and application notes for more information.
-
EMI filtering can be implemented using a combination of capacitors, resistors, and ferrite beads on the PCB. STMicroelectronics provides guidelines for EMI filtering in the application note AN2352. Additionally, the use of shielded cables and connectors can also help reduce EMI emissions.