-
Part Symbol
-
Footprint
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for SP336ECT-L by Exar Corporation
Results Overview of SP336ECT-L by Exar Corporation
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
SP336ECT-L Information
SP336ECT-L by Exar Corporation is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Part Details for SP336ECT-L
SP336ECT-L CAD Models
SP336ECT-L Part Data Attributes
|
|
SP336ECT-L
Exar Corporation
Buy Now
Datasheet
|
Compare Parts:
SP336ECT-L
Exar Corporation
Line Transceiver, 4 Func, 4 Driver, 4 Rcvr, PDSO28, MS-013AE, SOIC-28
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | EXAR CORP | |
| Part Package Code | SOIC | |
| Package Description | SOP, SOP28,.4 | |
| Pin Count | 28 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | EXAR | |
| Additional Feature | ALSO OPERATES AT 5V SUPPLY | |
| Differential Output | YES | |
| Driver Number of Bits | 4 | |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER | |
| Interface IC Type | LINE TRANSCEIVER | |
| Interface Standard | EIA-232; V.11; V.28; EIA-422; EIA-485 | |
| JESD-30 Code | R-PDSO-G28 | |
| JESD-609 Code | e3 | |
| Length | 17.9 mm | |
| Moisture Sensitivity Level | 3 | |
| Number of Functions | 4 | |
| Number of Terminals | 28 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Out Swing-Min | 10 V | |
| Output Low Current-Max | 0.0025 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP28,.4 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 150 ns | |
| Receiver Number of Bits | 4 | |
| Seated Height-Max | 2.65 mm | |
| Supply Current-Max | 30 mA | |
| Supply Voltage-Max | 3.465 V | |
| Supply Voltage-Min | 3.135 V | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | YES | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Width | 7.5 mm |
SP336ECT-L Frequently Asked Questions (FAQ)
-
A good PCB layout is crucial for the SP336ECT-L. Ensure that the device is placed near the connector, and use a solid ground plane to reduce EMI. Keep the signal traces short and away from the power traces. Use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
-
The SP336ECT-L has a thermal pad that must be connected to a thermal plane on the PCB. Ensure good thermal conductivity by using a thermal via or a thermal pad connected to a large copper area. Keep the device away from heat sources and use a heat sink if necessary.
-
The maximum cable length supported by the SP336ECT-L depends on the baud rate and the cable quality. As a general rule, the maximum cable length is 100 meters at 115.2 kbps and 50 meters at 921.6 kbps. However, it's recommended to use a cable length of 10-20 meters for optimal performance.
-
The SP336ECT-L can be configured for RS-485 or RS-422 mode by connecting the DE (Driver Enable) pin to VCC or GND. For RS-485 mode, connect DE to VCC, and for RS-422 mode, connect DE to GND. Additionally, ensure that the correct termination resistors are used for the chosen mode.
-
The recommended power-up sequence for the SP336ECT-L is to power up the VCC supply first, followed by the VIO supply. This ensures that the internal voltage regulators are powered up correctly and prevents any potential damage to the device.