Part Details for SDA03H0SBD by C&K
Results Overview of SDA03H0SBD by C&K
- Distributor Offerings: (10 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (5 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
SDA03H0SBD Information
SDA03H0SBD by C&K is a DIP Switch.
DIP Switches are under the broader part category of Switches.
Electrical switches are binary devices that control the flow of current in a circuit by either allowing or preventing the flow of electrons. Read more about Switches on our Switches part category page.
Price & Stock for SDA03H0SBD
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
39M1374
|
Newark | Dip Switches/Sip Switches Flush Act 3 Pos |C&k Components SDA03H0SBD RoHS: Not Compliant Min Qty: 113 Package Multiple: 1 Date Code: 0 Container: Bulk | 93 |
|
$1.7300 / $1.8800 | Buy Now |
|
DISTI #
35AH5912
|
Newark | Sda03H0Sbd |C&k Components SDA03H0SBD RoHS: Not Compliant Min Qty: 450 Package Multiple: 1 Date Code: 0 Container: Bulk | 0 |
|
$1.3500 / $1.5400 | Buy Now |
|
DISTI #
CKN6060-ND
|
DigiKey | SWITCH SLIDE DIP SPST 0.025A 24V Min Qty: 1 Lead time: 11 Weeks Container: Tube |
1113 In Stock |
|
$1.2415 / $2.1000 | Buy Now |
|
DISTI #
611-SDA03H0SBD
|
Mouser Electronics | DIP Switches / SIP Switches FLUSH ACT 3 POS RoHS: Compliant | 402 |
|
$0.9930 / $1.9700 | Buy Now |
|
DISTI #
16864759
|
Verical | Switch DIP OFF ON SPST 3 Flush Slide 0.1A 24VDC Gull Wing 1000Cycles 2.54mm SMD Tube RoHS: Compliant Min Qty: 34 Package Multiple: 1 | Americas - 93 |
|
$1.8400 | Buy Now |
|
DISTI #
51604583
|
Verical | Switch DIP OFF ON SPST 3 Flush Slide 0.1A 24VDC Gull Wing 1000Cycles 2.54mm SMD Tube RoHS: Compliant Min Qty: 45 Package Multiple: 45 Date Code: 1312 | Americas - 90 |
|
$1.4040 / $1.8590 | Buy Now |
|
|
Bristol Electronics | 90 |
|
RFQ | ||
|
|
Future Electronics | SDA Series Low Profile SPST 3 Position Surface Mount Sealed DIP Switch Min Qty: 45 Package Multiple: 45 |
20 null |
|
$0.8800 / $0.9750 | Buy Now |
|
DISTI #
SDA03H0SBD
|
IBS Electronics | SWITCH DIP OFF ON SPST 3 RECESSED SLIDE 0.1A 24VDC GULL WING 1000CYCLE 2.54MM SMD TUBE Min Qty: 113 Package Multiple: 1 | 203 |
|
$1.2675 / $1.5340 | Buy Now |
|
DISTI #
000000000002422739
|
Sager | DIP Switches / SIP Switches FLUSH ACT 3 POS Min Qty: 450 | 0 |
|
$1.0400 / $1.1500 | Buy Now |
Part Details for SDA03H0SBD
SDA03H0SBD CAD Models
SDA03H0SBD Part Data Attributes
|
|
SDA03H0SBD
C&K
Buy Now
Datasheet
|
Compare Parts:
SDA03H0SBD
C&K
SLIDE DIP SWITCH-3SWITCHES, SPST, LATCHED,0.1A, 50VDC, SURFACE MOUNT-STRAIGHT, ROHS COMPLIANT
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | C & K COMPONENTS LLC | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8536.50.90.50 | |
| Factory Lead Time | 48 Weeks | |
| Samacsys Manufacturer | C & K COMPONENTS | |
| Actuator Material | POLYAMIDE6T | |
| Actuator Type | SLIDE TYPE | |
| Additional Feature | LOW PROFIE, UL | |
| Body Breadth | 7.49 mm | |
| Body Color | BLACK | |
| Body Height | 3.5 mm | |
| Body Length or Diameter | 9.6 mm | |
| Center Contact Material | BERYLLIUM COPPER | |
| Center Contact Plating | GOLD | |
| Contact Current(DC)-Max | 0.1 A | |
| Contact (DC) Max Rating R Load | 0.1A@5VDC | |
| Contact Function | ON-OFF | |
| Contact Resistance | 0.05 mΩ | |
| Contact Voltage(DC)-Max | 5 V | |
| Dielectric Withstand Volts | 300VDC V | |
| Electrical Life | 1000 Cycle(s) | |
| End Contact Material | BERYLLIUM COPPER | |
| End Contact Plating | GOLD | |
| Housing Material | POLYPHENYLENE SULPHIDE | |
| Insulation Resistance | 100000000 Ω | |
| Insulator Material | POLYPHENYLENE SULPHIDE | |
| JESD-609 Code | e4 | |
| Mounting Feature | SURFACE MOUNT-STRAIGHT | |
| Number of Positions | 3 | |
| Number of Switch Sections | 3 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Packing Method | TUBE | |
| Surface Mount | NO | |
| Switch Action | LATCHED | |
| Switch Function | SPST | |
| Switch Type | SLIDE DIP SWITCH | |
| Terminal Finish | GOLD OVER NICKEL | |
| Terminal Material | BRASS | |
| Termination Type | SOLDER |
Alternate Parts for SDA03H0SBD
This table gives cross-reference parts and alternative options found for SDA03H0SBD. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of SDA03H0SBD, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| SDA03H0SKD | C&K | Check for Price | SLIDE DIP SWITCH-3SWITCHES, SPST, LATCHED,0.1A, 50VDC, SURFACE MOUNT-STRAIGHT | SDA03H0SBD vs SDA03H0SKD |
SDA03H0SBD Frequently Asked Questions (FAQ)
-
The recommended operating temperature range for the SDA03H0SBD is -40°C to 85°C, as specified in the datasheet. However, it's essential to note that the switch's performance and lifespan may be affected if operated outside this range for extended periods.
-
To ensure proper debouncing, it's recommended to use an external debouncing circuit or a microcontroller with built-in debouncing capabilities. The datasheet provides guidance on debouncing requirements, but it's crucial to consider the specific application and switching frequency to determine the optimal debouncing approach.
-
The maximum current rating for the SDA03H0SBD is 100mA, as specified in the datasheet. Exceeding this rating may lead to premature wear or damage to the switch. It's essential to ensure that the switch is used within its rated current capacity to maintain reliability and performance.
-
While the SDA03H0SBD is designed to be rugged and reliable, it's essential to consider the specific environmental requirements of the application. The datasheet provides information on the switch's vibration and shock resistance, but it's recommended to consult with C&K or a qualified engineer to determine the switch's suitability for high-vibration or high-shock environments.
-
To clean the SDA03H0SBD switch, use a soft, dry brush or a lint-free cloth to gently remove any debris or contaminants. Avoid using harsh chemicals, solvents, or abrasive materials, as they may damage the switch's contacts or housing. It's also recommended to follow proper handling and storage procedures to prevent contamination and damage.