Part Details for MC1741CP1 by Motorola Mobility LLC
Results Overview of MC1741CP1 by Motorola Mobility LLC
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
MC1741CP1 Information
MC1741CP1 by Motorola Mobility LLC is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Part Details for MC1741CP1
MC1741CP1 CAD Models
MC1741CP1 Part Data Attributes
|
|
MC1741CP1
Motorola Mobility LLC
Buy Now
Datasheet
|
Compare Parts:
MC1741CP1
Motorola Mobility LLC
OP-AMP, 7500uV OFFSET-MAX, 1MHz BAND WIDTH, PDIP8, PLASTIC, DIP-8
|
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | MOTOROLA INC | |
| Part Package Code | DIP | |
| Package Description | DIP, | |
| Pin Count | 8 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Average Bias Current-Max (IIB) | 0.8 µA | |
| Common-mode Reject Ratio-Min | 70 dB | |
| Common-mode Reject Ratio-Nom | 90 dB | |
| Input Offset Voltage-Max | 7500 µV | |
| JESD-30 Code | R-PDIP-T8 | |
| JESD-609 Code | e0 | |
| Length | 9.78 mm | |
| Neg Supply Voltage Limit-Max | -18 V | |
| Neg Supply Voltage-Nom (Vsup) | -15 V | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | DIP | |
| Package Shape | RECTANGULAR | |
| Package Style | IN-LINE | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 4.45 mm | |
| Slew Rate-Nom | 0.5 V/us | |
| Supply Current-Max | 2.8 mA | |
| Supply Voltage Limit-Max | 18 V | |
| Supply Voltage-Nom (Vsup) | 15 V | |
| Surface Mount | NO | |
| Technology | BIPOLAR | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | Tin/Lead (Sn/Pb) | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Pitch | 2.54 mm | |
| Terminal Position | DUAL | |
| Unity Gain BW-Nom | 1000 | |
| Voltage Gain-Min | 20000 | |
| Width | 7.62 mm |
MC1741CP1 Frequently Asked Questions (FAQ)
-
The recommended operating voltage range for the MC1741CP1 is 4.5V to 18V.
-
To ensure stable operation, it is recommended to decouple the input and output pins with capacitors, and to use a stable voltage source with minimal ripple.
-
The maximum output current of the MC1741CP1 is 1A.
-
Yes, the MC1741CP1 can be used in switching regulator applications, but it is recommended to add external components to ensure stability and minimize electromagnetic interference (EMI).
-
To protect the MC1741CP1 from overheating, ensure good heat sinking, use a heat sink with a thermal resistance of 10°C/W or less, and avoid operating the device at maximum power dissipation for extended periods.