Part Details for LTC1759CG#TRPBF by Linear Technology
Results Overview of LTC1759CG#TRPBF by Linear Technology
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (5 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
LTC1759CG#TRPBF Information
LTC1759CG#TRPBF by Linear Technology is a Switching Regulator or Controller.
Switching Regulator or Controllers are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Part Details for LTC1759CG#TRPBF
LTC1759CG#TRPBF CAD Models
LTC1759CG#TRPBF Part Data Attributes
|
|
LTC1759CG#TRPBF
Linear Technology
Buy Now
Datasheet
|
Compare Parts:
LTC1759CG#TRPBF
Linear Technology
LTC1759 - Smart Battery Charger; Package: SSOP; Pins: 36; Temperature Range: 0°C to 70°C
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | LINEAR TECHNOLOGY CORP | |
| Part Package Code | SSOP | |
| Package Description | 0.209 INCH, PLASTIC, SSOP-36 | |
| Pin Count | 36 | |
| Manufacturer Package Code | G | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER | |
| Control Mode | CURRENT-MODE | |
| Control Technique | PULSE WIDTH MODULATION | |
| Input Voltage-Max | 24 V | |
| Input Voltage-Min | 11 V | |
| Input Voltage-Nom | 18 V | |
| JESD-30 Code | R-PDSO-G36 | |
| JESD-609 Code | e3 | |
| Length | 12.8 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 36 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Output Current-Max | 0.2 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SSOP | |
| Package Equivalence Code | SSOP36,.3 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, SHRINK PITCH | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 2 mm | |
| Supply Current-Max (Isup) | 20 mA | |
| Surface Mount | YES | |
| Switcher Configuration | PUSH-PULL | |
| Switching Frequency-Max | 230 kHz | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.65 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 5.3 mm |
Alternate Parts for LTC1759CG#TRPBF
This table gives cross-reference parts and alternative options found for LTC1759CG#TRPBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC1759CG#TRPBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LTC1759CG | Analog Devices Inc | Check for Price | Battery Charge Controller, Current-mode, 0.2A, 230kHz Switching Freq-Max, CMOS, PDSO36 | LTC1759CG#TRPBF vs LTC1759CG |
LTC1759CG#TRPBF Frequently Asked Questions (FAQ)
-
The recommended layout and placement for the LTC1759CG involves keeping the input and output capacitors close to the IC, using a solid ground plane, and minimizing the length of the traces between the IC and the capacitors. A 4-layer board with a solid ground plane is recommended. Refer to the Linear Technology application note AN-72 for more details.
-
The output capacitors should be selected based on the output voltage, output current, and ripple requirements. A low ESR capacitor with a value between 10uF to 22uF is recommended. The capacitor should also be rated for the maximum output voltage and have a low ESL to minimize ringing.
-
The maximum input voltage that the LTC1759CG can handle is 15V. However, the recommended input voltage range is 3.5V to 12V for optimal performance and reliability.
-
The output voltage of the LTC1759CG can be adjusted by using a resistive divider network between the output and the feedback pin. The resistors should be chosen to provide a stable output voltage and to ensure that the feedback pin is biased within the recommended range.
-
The thermal shutdown temperature of the LTC1759CG is typically 150°C. The device will shut down when the junction temperature exceeds this value and will restart when the temperature drops below 130°C.