Part Details for LTC1430CS#PBF by Analog Devices Inc
Results Overview of LTC1430CS#PBF by Analog Devices Inc
- Distributor Offerings: (5 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (7 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Energy and Power Systems
Transportation and Logistics
Renewable Energy
Automotive
LTC1430CS#PBF Information
LTC1430CS#PBF by Analog Devices Inc is a Switching Regulator or Controller.
Switching Regulator or Controllers are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for LTC1430CS#PBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
LTC1430CS#PBF-ND
|
DigiKey | IC REG CTRLR INTEL 1OUT 16SOIC Min Qty: 1 Lead time: 10 Weeks Container: Tube |
86 In Stock |
|
$5.9375 / $12.1400 | Buy Now |
|
DISTI #
584-LTC1430CS#PBF
|
Mouser Electronics | Switching Voltage Regulators Hi Pwr Buck Sw Reg Cntr RoHS: Compliant | 62 |
|
$6.1100 / $10.7000 | Buy Now |
|
|
Analog Devices Inc | Hi Pwr Buck Sw Reg Cntr Package Multiple: 50 | 1968 |
|
$4.7500 / $12.1400 | Buy Now |
|
|
Rochester Electronics | LTC1430 - High Power Step-Down Switching Regulator Controller RoHS: Compliant Status: Active Min Qty: 1 | 1800 |
|
$5.0000 / $6.2500 | Buy Now |
|
DISTI #
LTC1430CS#PBF
|
Richardson RFPD | POWER MANAGEMENT IC RoHS: Compliant Min Qty: 100 | 0 |
|
$6.1300 / $6.7300 | Buy Now |
Part Details for LTC1430CS#PBF
LTC1430CS#PBF CAD Models
LTC1430CS#PBF Part Data Attributes
|
|
LTC1430CS#PBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LTC1430CS#PBF
Analog Devices Inc
High Power Step-Down Switching Regulator Controller
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Package Description | SO-16 | |
| Pin Count | 16 | |
| Manufacturer Package Code | 05-08-1610 (S16) | |
| Reach Compliance Code | compliant | |
| Samacsys Manufacturer | Analog Devices | |
| Analog IC - Other Type | SWITCHING CONTROLLER | |
| Control Mode | VOLTAGE-MODE | |
| Control Technique | PULSE WIDTH MODULATION | |
| Input Voltage-Max | 8 V | |
| Input Voltage-Min | 4 V | |
| Input Voltage-Nom | 5 V | |
| JESD-30 Code | R-PDSO-G16 | |
| JESD-609 Code | e3 | |
| Length | 9.9 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 16 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Output Current-Max | 10 A | |
| Output Voltage-Nom | 3.3 V | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP16,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.75 mm | |
| Supply Current-Max (Isup) | 0.7 mA | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Switcher Configuration | PUSH-PULL | |
| Switching Frequency-Max | 500 kHz | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 3.9 mm |
Alternate Parts for LTC1430CS#PBF
This table gives cross-reference parts and alternative options found for LTC1430CS#PBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC1430CS#PBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LTC1430CS#TRPBF | Linear Technology | Check for Price | LTC1430 - High Power Step-Down Switching Regulator Controller; Package: SO; Pins: 16; Temperature Range: 0°C to 70°C | LTC1430CS#PBF vs LTC1430CS#TRPBF |
| LTC1430CS#PBF | Linear Technology | Check for Price | LTC1430 - High Power Step-Down Switching Regulator Controller; Package: SO; Pins: 16; Temperature Range: 0°C to 70°C | LTC1430CS#PBF vs LTC1430CS#PBF |
| LTC1430CS | Linear Technology | Check for Price | LTC1430 - High Power Step-Down Switching Regulator Controller; Package: SO; Pins: 16; Temperature Range: 0°C to 70°C | LTC1430CS#PBF vs LTC1430CS |
| LTC1430CS#TRPBF | Analog Devices Inc | Check for Price | High Power Step-Down Switching Regulator Controller | LTC1430CS#PBF vs LTC1430CS#TRPBF |
| LTC1430IS | Linear Technology | Check for Price | LTC1430 - High Power Step-Down Switching Regulator Controller; Package: SO; Pins: 16; Temperature Range: -40°C to 85°C | LTC1430CS#PBF vs LTC1430IS |
| LTC1430IS#TRPBF | Analog Devices Inc | Check for Price | High Power Step-Down Switching Regulator Controller | LTC1430CS#PBF vs LTC1430IS#TRPBF |
| LTC1430IS#PBF | Linear Technology | Check for Price | LTC1430 - High Power Step-Down Switching Regulator Controller; Package: SO; Pins: 16; Temperature Range: -40°C to 85°C | LTC1430CS#PBF vs LTC1430IS#PBF |
LTC1430CS#PBF Frequently Asked Questions (FAQ)
-
A good PCB layout for the LTC1430CS#PBF involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the input and output capacitors close to the device. Additionally, it's recommended to use a low-ESR capacitor for the output filter and to keep the traces as short as possible to minimize noise and radiation.
-
The choice of input and output capacitors for the LTC1430CS#PBF depends on the specific application requirements. For the input capacitor, a low-ESR ceramic capacitor with a value of 10uF to 22uF is recommended. For the output capacitor, a low-ESR ceramic or tantalum capacitor with a value of 10uF to 47uF is recommended. The capacitor values should be chosen based on the desired output voltage ripple and transient response.
-
The maximum ambient temperature range for the LTC1430CS#PBF is -40°C to 85°C. However, the device can operate up to 125°C with a reduced specification. It's recommended to derate the device's performance at higher temperatures to ensure reliable operation.
-
To ensure proper power-up and power-down of the LTC1430CS#PBF, it's recommended to follow a controlled power-up sequence. The device should be powered up with the input voltage rising slowly (less than 10mV/us) to prevent overshoot and ensure proper startup. During power-down, the input voltage should be reduced slowly to prevent any voltage overshoot or ringing.
-
The recommended input voltage range for the LTC1430CS#PBF is 3.5V to 15V. However, the device can operate with an input voltage as low as 3V, but with reduced performance. It's recommended to operate the device within the recommended input voltage range to ensure optimal performance and reliability.