Part Details for E125SD1APE by C&K
Results Overview of E125SD1APE by C&K
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (2 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (7 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
E125SD1APE Information
E125SD1APE by C&K is a Pushbutton Switch.
Pushbutton Switches are under the broader part category of Switches.
Electrical switches are binary devices that control the flow of current in a circuit by either allowing or preventing the flow of electrons. Read more about Switches on our Switches part category page.
Price & Stock for E125SD1APE
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
000000000001643727
|
Sager | Pushbutton Switches | 0 |
|
Buy Now |
Part Details for E125SD1APE
E125SD1APE CAD Models
E125SD1APE Part Data Attributes
|
|
E125SD1APE
C&K
Buy Now
Datasheet
|
Compare Parts:
E125SD1APE
C&K
PUSHBUTTON SWITCH, SPDT, MOMENTARY, 0.02A, 20VDC, THROUGH HOLE-RIGHT ANGLE, ROHS COMPLIANT
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | C & K COMPONENTS LLC | |
| Package Description | ROHS COMPLIANT | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8536.50.90.31 | |
| Actuator Type | PLUNGER | |
| Body Breadth | 12.7 mm | |
| Body Height | 6.6 mm | |
| Body Length or Diameter | 12.7 mm | |
| Contact (AC) Max Rating R Load | 0.02A@20VAC | |
| Contact Current(AC)-Max | 0.02 A | |
| Contact Current(DC)-Max | 0.02 A | |
| Contact (DC) Max Rating R Load | 0.02A@20VDC | |
| Contact Voltage(AC)-Max | 20 V | |
| Contact Voltage(DC)-Max | 20 V | |
| Electrical Life | 60000 Cycle(s) | |
| Illumination | NON-ILLUMINATED | |
| JESD-609 Code | e3 | |
| Mounting Feature | THROUGH HOLE-RIGHT ANGLE | |
| Operating Temperature-Max | 75 °C | |
| Operating Temperature-Min | -30 °C | |
| Sealing | EPOXY TERMINAL SEALED; SPLASH PROOF | |
| Surface Mount | NO | |
| Switch Action | MOMENTARY | |
| Switch Function | SPDT | |
| Switch Type | MINIATURE SWITCH | |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier | |
| Termination Type | SOLDER |
Alternate Parts for E125SD1APE
This table gives cross-reference parts and alternative options found for E125SD1APE. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of E125SD1APE, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| E125SD1AKE | ITT Interconnect Solutions | Check for Price | Pushbutton Switch, SPDT, On-(on), Momentary, 1A, 28VDC, 5 PCB Hole Cnt, Solder Terminal, Through Hole-right Angle | E125SD1APE vs E125SD1AKE |
| E125SD1AKE | C&K | Check for Price | PUSHBUTTON SWITCH, SPDT, MOMENTARY, 1A, 28VDC, THROUGH HOLE-RIGHT ANGLE | E125SD1APE vs E125SD1AKE |