Part Details for AT24C08N-10SI-1.8 by Atmel Corporation
Results Overview of AT24C08N-10SI-1.8 by Atmel Corporation
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (3 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
AT24C08N-10SI-1.8 Information
AT24C08N-10SI-1.8 by Atmel Corporation is an EEPROM.
EEPROMs are under the broader part category of Memory Components.
Memory components are essential in electronics for computer processing. They can be volatile or non-volatile, depending on the desired function. Read more about Memory Components on our Memory part category page.
Price & Stock for AT24C08N-10SI-1.8
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Quest Components | IC,SERIAL EEPROM,1KX8,MOS,SOP,8PIN,PLASTIC | 8999 |
|
$1.0290 / $2.4500 | Buy Now |
|
|
Quest Components | IC,SERIAL EEPROM,1KX8,MOS,SOP,8PIN,PLASTIC | 2307 |
|
$1.5435 / $3.0870 | Buy Now |
Part Details for AT24C08N-10SI-1.8
AT24C08N-10SI-1.8 CAD Models
AT24C08N-10SI-1.8 Part Data Attributes
|
|
AT24C08N-10SI-1.8
Atmel Corporation
Buy Now
Datasheet
|
Compare Parts:
AT24C08N-10SI-1.8
Atmel Corporation
EEPROM, 1KX8, Serial, CMOS, PDSO8, 0.150 INCH, PLASTIC, MS-012AA, SOIC-8
|
| Pbfree Code | No | |
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ATMEL CORP | |
| Part Package Code | SOIC | |
| Package Description | 0.150 INCH, PLASTIC, MS-012AA, SOIC-8 | |
| Pin Count | 8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.32.00.51 | |
| Additional Feature | DATA RETENTION = 100 YEARS | |
| Clock Frequency-Max (fCLK) | 0.1 MHz | |
| Data Retention Time-Min | 100 | |
| Endurance | 1000000 Write/Erase Cycles | |
| I2C Control Byte | 1010DXXR | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e0 | |
| Length | 4.9 mm | |
| Memory Density | 8192 bit | |
| Memory IC Type | EEPROM | |
| Memory Width | 8 | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Number of Words | 1024 words | |
| Number of Words Code | 1000 | |
| Operating Mode | SYNCHRONOUS | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Organization | 1KX8 | |
| Output Characteristics | OPEN-DRAIN | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Parallel/Serial | SERIAL | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.75 mm | |
| Serial Bus Type | I2C | |
| Standby Current-Max | 0.000003 A | |
| Supply Current-Max | 0.003 mA | |
| Supply Voltage-Max (Vsup) | 5.5 V | |
| Supply Voltage-Min (Vsup) | 1.8 V | |
| Supply Voltage-Nom (Vsup) | 2.5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Width | 3.9 mm | |
| Write Cycle Time-Max (tWC) | 5 ms |
Alternate Parts for AT24C08N-10SI-1.8
This table gives cross-reference parts and alternative options found for AT24C08N-10SI-1.8. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of AT24C08N-10SI-1.8, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| S-24C08AFJATB-01 | ABLIC Inc. | Check for Price | 1KX8 I2C/2-WIRE SERIAL EEPROM, PDSO8, SOP-8 | AT24C08N-10SI-1.8 vs S-24C08AFJATB-01 |
| S-24C08AFJATB-01 | Epson Electronics America Inc | Check for Price | 1KX8 I2C/2-WIRE SERIAL EEPROM, PDSO8, SOP-8 | AT24C08N-10SI-1.8 vs S-24C08AFJATB-01 |
| S-24C08AFJTB-01 | Epson Electronics America Inc | Check for Price | 1KX8 I2C/2-WIRE SERIAL EEPROM, PDSO8, SOP-8 | AT24C08N-10SI-1.8 vs S-24C08AFJTB-01 |
AT24C08N-10SI-1.8 Frequently Asked Questions (FAQ)
-
The AT24C08N-10SI-1.8 has a minimum of 1 million write cycles, but this can vary depending on the operating conditions and usage patterns.
-
To ensure data integrity, use the Page Write buffer and follow the recommended write cycle procedures outlined in the datasheet. Additionally, consider using a voltage supervisor or power-on reset circuit to ensure a clean power-up sequence.
-
The recommended operating voltage range for the AT24C08N-10SI-1.8 is 1.7V to 5.5V, with a typical operating voltage of 3.3V or 5V.
-
To handle bus contention or multiple masters on the I2C bus, use a bus arbiter or a multiplexer to ensure that only one master is active at a time. Additionally, consider using a I2C bus buffer or repeater to improve signal integrity and reduce bus loading.
-
The maximum clock frequency for the I2C interface of the AT24C08N-10SI-1.8 is 400 kHz, but it can operate at lower frequencies such as 100 kHz or 10 kHz depending on the application requirements.