Part Details for ADM202EARW-REEL by Analog Devices Inc
Results Overview of ADM202EARW-REEL by Analog Devices Inc
- Distributor Offerings: (5 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
ADM202EARW-REEL Information
ADM202EARW-REEL by Analog Devices Inc is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for ADM202EARW-REEL
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 930 |
|
RFQ | ||
|
|
Bristol Electronics | 750 |
|
RFQ | ||
|
|
Quest Components | 744 |
|
$1.7292 / $3.1440 | Buy Now | |
|
|
Quest Components | 600 |
|
$2.1038 / $3.8250 | Buy Now | |
|
|
Rochester Electronics | EMI/EMC-Compliant, +/- 15 KV, ESD Protected RS-232 Line Driver/Receiver RoHS: Not Compliant Status: Obsolete Min Qty: 1 | 24715 |
|
$1.1000 / $1.3800 | Buy Now |
Part Details for ADM202EARW-REEL
ADM202EARW-REEL CAD Models
ADM202EARW-REEL Part Data Attributes
|
|
ADM202EARW-REEL
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
ADM202EARW-REEL
Analog Devices Inc
IC DUAL LINE TRANSCEIVER, PDSO16, MS-013AA, SOIC-16, Line Driver or Receiver
|
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | SOIC | |
| Package Description | MS-013AA, SOIC-16 | |
| Pin Count | 16 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Differential Output | NO | |
| Driver Number of Bits | 2 | |
| Input Characteristics | SCHMITT TRIGGER | |
| Interface IC Type | LINE TRANSCEIVER | |
| Interface Standard | EIA-232-E; V.28 | |
| JESD-30 Code | R-PDSO-G16 | |
| JESD-609 Code | e0 | |
| Length | 10.3 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 2 | |
| Number of Terminals | 16 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Out Swing-Min | 10 V | |
| Output Characteristics | TOTEM-POLE | |
| Output Low Current-Max | 0.0032 A | |
| Output Polarity | INVERTED | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP16,.4 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 240 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 1000 ns | |
| Receiver Number of Bits | 2 | |
| Seated Height-Max | 2.65 mm | |
| Supply Current-Max | 18 mA | |
| Supply Voltage-Max | 5.5 V | |
| Supply Voltage-Min | 4.5 V | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Tin/Lead (Sn85Pb15) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Transmit Delay-Max | 1500 ns | |
| Width | 7.5 mm |
Alternate Parts for ADM202EARW-REEL
This table gives cross-reference parts and alternative options found for ADM202EARW-REEL. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of ADM202EARW-REEL, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| ADM202EARW | Analog Devices Inc | Check for Price | EMI/EMC Compliant, ±15 kV ESD Protected, RS-232 Line Drivers/Receivers | ADM202EARW-REEL vs ADM202EARW |
ADM202EARW-REEL Frequently Asked Questions (FAQ)
-
A good PCB layout for the ADM202EARW-REEL involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the device and the capacitors. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
-
To ensure the reliability of the ADM202EARW-REEL in high-temperature applications, it's essential to follow proper thermal management practices, such as providing adequate heat sinking, using a thermally conductive PCB material, and minimizing the power dissipation of the device. Additionally, it's recommended to operate the device within its specified temperature range and to follow the recommended derating guidelines.
-
The ADM202EARW-REEL has built-in ESD protection, but it's still important to follow proper ESD handling and storage procedures to prevent damage to the device. This includes using ESD-safe materials, grounding oneself before handling the device, and storing the device in a static-shielding bag or container.
-
To troubleshoot issues with the ADM202EARW-REEL, start by reviewing the datasheet and application notes to ensure that the device is being used within its specified operating conditions. Then, use a logic analyzer or oscilloscope to verify the input and output signals, and check for any signs of overheating or physical damage to the device. If the issue persists, contact Analog Devices Inc. support for further assistance.
-
The ADM202EARW-REEL is not a radiation-hardened device, and it's not suitable for use in high-radiation environments. If radiation hardening is required, it's recommended to use a device that is specifically designed and tested for radiation tolerance, such as those from Analog Devices Inc.'s radiation-hardened product line.