Part Details for OP-07CS8#PBF by Analog Devices Inc
Results Overview of OP-07CS8#PBF by Analog Devices Inc
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Industrial Automation
Electronic Manufacturing
OP-07CS8#PBF Information
OP-07CS8#PBF by Analog Devices Inc is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Part Details for OP-07CS8#PBF
OP-07CS8#PBF CAD Models
OP-07CS8#PBF Part Data Attributes
|
|
OP-07CS8#PBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
OP-07CS8#PBF
Analog Devices Inc
Operational Amplifier, 1 Func, 250uV Offset-Max, PDSO8
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Package Description | LEAD FREE, PLASTIC, SOP-8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Average Bias Current-Max (IIB) | 0.009 µA | |
| Common-mode Reject Ratio-Nom | 120 dB | |
| Input Offset Voltage-Max | 250 µV | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 4.9 mm | |
| Neg Supply Voltage Limit-Max | -22 V | |
| Neg Supply Voltage-Nom (Vsup) | -15 V | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.752 mm | |
| Slew Rate-Nom | 0.25 V/us | |
| Supply Voltage Limit-Max | 22 V | |
| Supply Voltage-Nom (Vsup) | 15 V | |
| Surface Mount | YES | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | Matte Tin (Sn) - annealed | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Unity Gain BW-Nom | 600 | |
| Width | 3.9 mm |
Alternate Parts for OP-07CS8#PBF
This table gives cross-reference parts and alternative options found for OP-07CS8#PBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of OP-07CS8#PBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| OP-07CS8#TR | Linear Technology | Check for Price | IC OP-AMP, 250 uV OFFSET-MAX, 0.6 MHz BAND WIDTH, PDSO8, PLASTIC, SOP-8, Operational Amplifier | OP-07CS8#PBF vs OP-07CS8#TR |
OP-07CS8#PBF Frequently Asked Questions (FAQ)
-
A good PCB layout for the OP07CS8 involves keeping the input and output traces short and separate, using a ground plane, and placing decoupling capacitors close to the power pins. A 4-layer PCB with a dedicated analog ground layer is recommended.
-
To ensure the OP07CS8 operates within its SOA, verify that the input voltage, output current, and power dissipation are within the specified limits. Also, ensure that the device is not exposed to excessive temperatures, and that the supply voltage is within the recommended range.
-
To filter out noise and interference, use a combination of passive and active filtering techniques. Add bypass capacitors to the power supply lines, use a ferrite bead or common-mode choke to filter out high-frequency noise, and consider adding an active filter stage before the OP07CS8 input.
-
Yes, the OP07CS8 can be used as a unity-gain buffer amplifier. However, ensure that the input impedance is matched to the source impedance, and that the output is properly terminated to prevent oscillations.
-
To handle ESD protection for the OP07CS8, use ESD protection devices such as TVS diodes or ESD arrays on the input and output lines. Also, ensure that the PCB is designed with ESD protection in mind, using features such as ESD-safe handling and storage procedures.