Part Details for LT1615IS5-1#TRPBF by Analog Devices Inc
Results Overview of LT1615IS5-1#TRPBF by Analog Devices Inc
- Distributor Offerings: (4 listings)
- Number of FFF Equivalents: (3 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
LT1615IS5-1#TRPBF Information
LT1615IS5-1#TRPBF by Analog Devices Inc is a Switching Regulator or Controller.
Switching Regulator or Controllers are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for LT1615IS5-1#TRPBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
LT1615IS5-1#TRPBFCT-ND
|
DigiKey | IC REG BOOST SEPIC ADJ TSOT23-5 Min Qty: 1 Lead time: 10 Weeks Container: Digi-Reel®, Cut Tape (CT), Tape & Reel (TR) |
7 In Stock |
|
$3.5125 / $8.2200 | Buy Now |
|
DISTI #
584-LT1615IS5-1TRPBF
|
Mouser Electronics | Switching Voltage Regulators uP Boost DC/DC Convs in SOT RoHS: Compliant | 2218 |
|
$3.6200 / $6.6500 | Buy Now |
|
|
Analog Devices Inc | uP Boost DC/DC Convs in SOT Min Qty: 2500 Package Multiple: 2500 | 2500 |
|
$2.8100 / $8.2200 | Buy Now |
|
DISTI #
LT1615IS5-1TRPB
|
Richardson RFPD | DC TO DC CONVERTER RoHS: Compliant Min Qty: 2500 | 0 |
|
$3.6300 / $3.7700 | Buy Now |
Part Details for LT1615IS5-1#TRPBF
LT1615IS5-1#TRPBF CAD Models
LT1615IS5-1#TRPBF Part Data Attributes
|
|
LT1615IS5-1#TRPBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LT1615IS5-1#TRPBF
Analog Devices Inc
Micropower Step-Up DC/DC Converters in ThinSOT
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Package Description | PLASTIC, MO-193, SOT-23, 5 PIN | |
| Pin Count | 5 | |
| Manufacturer Package Code | 05-08-1635 | |
| Reach Compliance Code | compliant | |
| Samacsys Manufacturer | Analog Devices | |
| Analog IC - Other Type | SWITCHING REGULATOR | |
| Control Mode | VOLTAGE-MODE | |
| Control Technique | CONSTANT OFF TIME | |
| Input Voltage-Max | 12 V | |
| Input Voltage-Min | 1 V | |
| Input Voltage-Nom | 1.2 V | |
| JESD-30 Code | R-PDSO-G5 | |
| JESD-609 Code | e3 | |
| Length | 2.9 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 5 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Output Current-Max | 0.125 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | VSSOP | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1 mm | |
| Surface Mount | YES | |
| Switcher Configuration | BOOST | |
| Technology | BIPOLAR | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.95 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 1.625 mm |
Alternate Parts for LT1615IS5-1#TRPBF
This table gives cross-reference parts and alternative options found for LT1615IS5-1#TRPBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LT1615IS5-1#TRPBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LT1615IS5-1#PBF | Linear Technology | Check for Price | LT1615 - Micropower Step-Up DC/DC Converters in ThinSOT; Package: SOT; Pins: 5; Temperature Range: -40°C to 85°C | LT1615IS5-1#TRPBF vs LT1615IS5-1#PBF |
| LT1615ES5-1#TR | Analog Devices Inc | Check for Price | Switching Regulator, Voltage-mode, 0.125A, PDSO5 | LT1615IS5-1#TRPBF vs LT1615ES5-1#TR |
| LT1615IS5-1 | Linear Technology | Check for Price | LT1615 - Micropower Step-Up DC/DC Converters in ThinSOT; Package: SOT; Pins: 5; Temperature Range: -40°C to 85°C | LT1615IS5-1#TRPBF vs LT1615IS5-1 |
LT1615IS5-1#TRPBF Frequently Asked Questions (FAQ)
-
A good PCB layout for the LT1615IS5-1 involves keeping the input and output capacitors close to the device, using a solid ground plane, and minimizing the length of the input and output traces. Additionally, it's recommended to use a separate analog ground plane and to keep the power supply traces away from the analog signals.
-
To ensure stability, it's essential to follow the recommended compensation network and component values, as well as to maintain a minimum output capacitance of 10uF. Additionally, the input and output voltage rails should be well-regulated and decoupled, and the device should be operated within its recommended operating conditions.
-
The LT1615IS5-1 is rated for operation up to 125°C ambient temperature, but it's essential to consider the device's thermal characteristics, such as its junction-to-ambient thermal resistance, to ensure that the device does not exceed its maximum junction temperature of 150°C.
-
Yes, the LT1615IS5-1 is available in a variety of grades, including the 'MP' grade, which is suitable for high-reliability applications, and the 'H' grade, which is suitable for automotive applications. However, it's essential to consult the device's datasheet and relevant standards to ensure that the device meets the specific requirements of the application.
-
To troubleshoot issues with the LT1615IS5-1, it's essential to follow a systematic approach, starting with a review of the device's datasheet and application notes. Common issues include incorrect component values, inadequate decoupling, and poor PCB layout. It's also recommended to use oscilloscopes and other diagnostic tools to identify and isolate the problem.