Part Details for ISP1106DH by Philips Semiconductors
Results Overview of ISP1106DH by Philips Semiconductors
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Industrial Automation
Renewable Energy
Robotics and Drones
ISP1106DH Information
ISP1106DH by Philips Semiconductors is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for ISP1106DH
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Chip 1 Exchange | INSTOCK | 504 |
|
RFQ |
Part Details for ISP1106DH
ISP1106DH CAD Models
ISP1106DH Part Data Attributes
|
|
ISP1106DH
Philips Semiconductors
Buy Now
Datasheet
|
Compare Parts:
ISP1106DH
Philips Semiconductors
Line Driver/Receiver, 1 Driver, CMOS, PDSO16,
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | PHILIPS SEMICONDUCTORS | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Differential Output | YES | |
| Driver Number of Bits | 1 | |
| High Level Input Current-Max | 0.000001 A | |
| Interface IC Type | LINE TRANSCEIVER | |
| JESD-30 Code | R-PDSO-G16 | |
| Number of Terminals | 16 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Out Swing-Min | 2.5 V | |
| Output Low Current-Max | 0.002 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TSSOP | |
| Package Equivalence Code | TSSOP16,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 18 ns | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.635 mm | |
| Terminal Position | DUAL |
ISP1106DH Frequently Asked Questions (FAQ)
-
A good PCB layout for ISP1106DH involves keeping the analog and digital grounds separate, using a solid ground plane, and placing decoupling capacitors close to the device. Additionally, ensure that the USB traces are routed away from noise-sensitive analog signals.
-
The ISP1106DH has an internal POR and BOD circuitry. To handle these, ensure that the power supply ramps up slowly (typically 1-10 ms) and that the voltage stays within the recommended operating range. You can also add external POR and BOD circuits for additional protection.
-
The ISP1106DH supports USB 1.1, which has a maximum cable length of 3 meters (10 feet). However, the actual cable length may vary depending on the cable quality, noise environment, and device capabilities.
-
Yes, the ISP1106DH can be used with a USB hub or other downstream devices. However, ensure that the total current drawn from the bus does not exceed the maximum allowed current (500 mA for USB 1.1) and that the devices are properly enumerated and configured.
-
To implement suspend and resume, use the device's SUSPEND and RESUME pins. When the SUSPEND pin is asserted, the device enters a low-power state. When the RESUME pin is asserted, the device resumes normal operation. Ensure that your firmware and software properly handle these signals.