-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for CSD97374Q4M by Texas Instruments
Results Overview of CSD97374Q4M by Texas Instruments
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (3 options)
- Part Data Attributes: (Available)
- Reference Designs: (Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
CSD97374Q4M Information
CSD97374Q4M by Texas Instruments is a Switching Regulator or Controller.
Switching Regulator or Controllers are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for CSD97374Q4M
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
296-35694-1-ND
|
DigiKey | IC HALF BRIDGE DRIVER 25A 8VSON Min Qty: 1 Lead time: 6 Weeks Container: Digi-Reel®, Cut Tape (CT), Tape & Reel (TR) |
6149 In Stock |
|
$1.0895 / $2.1900 | Buy Now |
|
DISTI #
595-CSD97374Q4M
|
Mouser Electronics | Gate Drivers Hi Freq Sync Buck Ne xFET Pwr Stage A 595-CSD97395Q4M RoHS: Compliant | 1104 |
|
$1.0700 / $2.1900 | Buy Now |
|
|
LCSC | 4.5V5.5V VSON-CLIP-8(3.5x4.5) Gate Drivers ROHS | 964 |
|
$1.1865 / $2.1567 | Buy Now |
Part Details for CSD97374Q4M
CSD97374Q4M CAD Models
CSD97374Q4M Part Data Attributes
|
|
CSD97374Q4M
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
CSD97374Q4M
Texas Instruments
30V 25A SON 3.5 x 4.5mm synchronous buck NexFET™ power stage 8-VSON-CLIP -40 to 150
|
| Pbfree Code | Yes | |
| Rohs Code | No | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | TEXAS INSTRUMENTS INC | |
| Package Description | VSON-CLIP-8 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Texas Instruments | |
| Additional Feature | ULTRA LOW QUIESCENT (ULQ) CURRENT MODE | |
| Analog IC - Other Type | SWITCHING REGULATOR | |
| Control Technique | PULSE WIDTH MODULATION | |
| Input Voltage-Max | 5.5 V | |
| Input Voltage-Min | 4.5 V | |
| Input Voltage-Nom | 5 V | |
| JESD-30 Code | R-PDSO-N8 | |
| JESD-609 Code | e4 | |
| Length | 4.5 mm | |
| Moisture Sensitivity Level | 2 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 150 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Current-Max | 60 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | HVSON | |
| Package Equivalence Code | SOLCC18,.14,16 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Seated Height-Max | 1 mm | |
| Surface Mount | YES | |
| Switcher Configuration | BUCK | |
| Switching Frequency-Max | 2000 kHz | |
| Temperature Grade | AUTOMOTIVE | |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) | |
| Terminal Form | NO LEAD | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 3.5 mm |
Alternate Parts for CSD97374Q4M
This table gives cross-reference parts and alternative options found for CSD97374Q4M. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of CSD97374Q4M, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| CSD95375Q4M | Texas Instruments | $1.1186 | 25A Synchronous Buck NexFET™ Power Stage 8-VSON-CLIP -40 to 150 | CSD97374Q4M vs CSD95375Q4M |
| CSD96370Q5M | Texas Instruments | $1.6900 | High Frequency Synchronous Buck NexFET™ Power Stage 22-LSON-CLIP -55 to 150 | CSD97374Q4M vs CSD96370Q5M |
| CSD95375Q4MT | Texas Instruments | Check for Price | SWITCHING REGULATOR | CSD97374Q4M vs CSD95375Q4MT |
Resources and Additional Insights for CSD97374Q4M
Reference Designs related to CSD97374Q4M
-
High Power Density 9V-15V input Intel® Pentium™ N3700 VCC0+VCC1 design for Industrial PC
The TI TPS1623 VR12.1 reference design: supporting Intel® Pentium™ N3700 : uses TI's driverless PWM architecture with TI power stages for high power density: high efficiency: and low component count while meeting Intel voltage tolerance requirements with low ripple: tight loadline: and high output current monitoring accuracy.
- TIDA-00858 新型高效率全桥整流器参考设计
-
High Power Density 9 to 15V In Intel Atom C2000 SoC VCCP & VNN Rail for Microservers Ref Design
The TI TPS53625 VR12 reference design (TIDA-00507): supporting Intel® Atom™ C2000: uses TI's driverless PWM architecture with TI power stages for high power density: high efficiency: and low component count while meeting Intel voltage tolerance requirements with low ripple and high output current monitoring accuracy.
-
CC2531ZLIGHT2-RD CC2531 Zlight2 参考设计
This reference design provides a complete ZigBee Light Link controlled color RGBW LED lamp. The lamp has four color LEDs (red, green, blue, white) and is powered over USB. The LEDs are controlled by the CC2531 device, which runs the ZigBee Light Link software stack. To save space and cost the boa
CSD97374Q4M Frequently Asked Questions (FAQ)
-
The maximum operating temperature range for the CSD97374Q4M is -40°C to 125°C.
-
To ensure proper biasing, connect the VIN pin to a stable voltage source, and decouple the input with a 10uF capacitor. Additionally, ensure the input voltage is within the recommended range of 4.5V to 60V.
-
To minimize EMI and noise, use a 4-layer PCB with a solid ground plane, and place the CSD97374Q4M near the input capacitors. Keep the input and output traces short and separate, and use a common-mode choke or ferrite bead to filter the input.
-
To calculate the output voltage ripple, use the following formula: ΔVout = (Iout * Rl) / (fsw * Cout), where Iout is the output current, Rl is the load resistance, fsw is the switching frequency, and Cout is the output capacitance.
-
The recommended input capacitor type is a low-ESR ceramic capacitor, such as an X5R or X7R dielectric, with a value of 10uF to 22uF.