Part Details for 26ET1-T by Honeywell Sensing and Control
Results Overview of 26ET1-T by Honeywell Sensing and Control
- Distributor Offerings: (5 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
26ET1-T Information
26ET1-T by Honeywell Sensing and Control is a Toggle Switch.
Toggle Switches are under the broader part category of Switches.
Electrical switches are binary devices that control the flow of current in a circuit by either allowing or preventing the flow of electrons. Read more about Switches on our Switches part category page.
Price & Stock for 26ET1-T
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
10AC4538
|
Newark | Sealed Oi Switch |Honeywell 26ET1-T RoHS: Not Compliant Min Qty: 20 Package Multiple: 1 Date Code: 0 Container: Bulk | 0 |
|
$1,830.5000 / $2,816.1700 | Buy Now |
|
DISTI #
480-4164-ND
|
DigiKey | SWITCH TOGGLE DPDT 4A 28V Min Qty: 20 Lead time: 32 Weeks Container: Bulk | Temporarily Out of Stock |
|
$1,797.5520 | Buy Now |
|
DISTI #
785-26ET1-T
|
Mouser Electronics | Toggle Switches Switch Toggle SPDT Lever 4A 28VDC RoHS: Not Compliant | 0 |
|
$2,496.1900 | Order Now |
|
DISTI #
70119742
|
RS | Toggle Switch, 2P, Solder T TYPE TERM Min Qty: 20 Package Multiple: 1 Lead time: 67 Weeks, 0 Days Container: Bulk | 0 |
|
$1,891.1700 | RFQ |
|
|
Master Electronics | MICRO SWITCH™ Electro-Magnetic Held Toggle Switches: ET Series, Double Pole Double Throw (DPDT), 2 Position (Mom. On - On, Coil Energized: On - On), Solder Turret Terminals, Standard Lever RoHS: Compliant |
5 On Order |
|
$2,058.8000 / $2,100.5000 | Buy Now |
Part Details for 26ET1-T
26ET1-T CAD Models
26ET1-T Part Data Attributes
|
|
26ET1-T
Honeywell Sensing and Control
Buy Now
Datasheet
|
Compare Parts:
26ET1-T
Honeywell Sensing and Control
Toggle Switch, DPDT, Latched, 4A, 28VDC, Wire Terminal, Lever Actuator, Panel Mount-threaded
|
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | HONEYWELL SENSING AND CONTROL | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8536.50.90.65 | |
| Actuator Length | 0.69 inch | |
| Actuator Type | LEVER | |
| Body Height | 47.49 mm | |
| Body Length or Diameter | 25.4 mm | |
| Bushing Diameter | 0.469 inch | |
| Bushing Length | 0.47 inch | |
| Bushing Type | 15/32-32 | |
| Contact Current(DC)-Max | 4 A | |
| Contact (DC) Max Rating R Load | 4A@28VDC | |
| Contact Voltage(DC)-Max | 28 V | |
| Illumination | NON-ILLUMINATED | |
| Mounting Feature | PANEL MOUNT-THREADED | |
| Operating Force-Max | 31.13 N | |
| Sealing | CORROSION PROOF | |
| Surface Mount | NO | |
| Switch Action | LATCHED | |
| Switch Function | DPDT | |
| Switch Type | TOGGLE SWITCH | |
| Termination Type | WIRE |
26ET1-T Frequently Asked Questions (FAQ)
-
The recommended mounting orientation for the 26ET1-T is with the sensor axis vertical and the connector pointing downwards to prevent moisture from entering the sensor.
-
The 26ET1-T is factory-calibrated and does not require additional calibration. However, it's recommended to perform a system-level calibration to ensure accurate temperature measurement.
-
The response time of the 26ET1-T is typically around 10-15 seconds, but this can vary depending on the specific application and environmental conditions.
-
Yes, the 26ET1-T is designed to withstand high-vibration environments and can operate in applications with vibration levels up to 10g.
-
No, the 26ET1-T is not designed for use in explosive or hazardous environments. It's recommended to use a sensor specifically designed for hazardous locations, such as the Honeywell HIH6000 series.