Part Details for XRP7714ILBTR-F by MaxLinear Inc
Results Overview of XRP7714ILBTR-F by MaxLinear Inc
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
XRP7714ILBTR-F Information
XRP7714ILBTR-F by MaxLinear Inc is a Switching Regulator or Controller.
Switching Regulator or Controllers are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Available Datasheets
| Part # | Manufacturer | Description | Datasheet |
|---|---|---|---|
| LM2917M-8 | Texas Instruments | Frequency to Voltage Converter 8-SOIC -40 to 85 | |
| LM2917MX/NOPB | Texas Instruments | Frequency to Voltage Converter 14-SOIC -40 to 85 | |
| LM2917N-8/NOPB | Texas Instruments | Frequency to Voltage Converter 8-PDIP -40 to 85 |
Price & Stock for XRP7714ILBTR-F
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
XRP7714ILBTR-F-ND
|
DigiKey | IC REG 5OUT BUCK/LNR SYNC 40TQFN Min Qty: 3000 Lead time: 20 Weeks Container: Tape & Reel (TR) | Limited Supply - Call |
|
Buy Now | |
|
|
Cytech Systems Limited | IC REG 5OUT BUCK/LNR SYNC 40TQFN | 9000 |
|
RFQ |
Part Details for XRP7714ILBTR-F
XRP7714ILBTR-F CAD Models
XRP7714ILBTR-F Part Data Attributes
|
|
XRP7714ILBTR-F
MaxLinear Inc
Buy Now
Datasheet
|
Compare Parts:
XRP7714ILBTR-F
MaxLinear Inc
Switching Controller, 1500kHz Switching Freq-Max, 6 X 6 MM, GREEN, MO-220WJJD-5, TQFN-40
|
| Rohs Code | Yes | |
| Part Life Cycle Code | End Of Life | |
| Ihs Manufacturer | MAXLINEAR INC | |
| Package Description | 6 X 6 MM, GREEN, MO-220WJJD-5, TQFN-40 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Factory Lead Time | 20 Weeks | |
| Samacsys Manufacturer | MaxLinear, Inc. | |
| Analog IC - Other Type | SWITCHING CONTROLLER | |
| Control Technique | PULSE WIDTH MODULATION | |
| Input Voltage-Max | 25 V | |
| Input Voltage-Min | 5.5 V | |
| Input Voltage-Nom | 12 V | |
| JESD-30 Code | S-XQCC-N40 | |
| JESD-609 Code | e3 | |
| Length | 6 mm | |
| Number of Functions | 4 | |
| Number of Terminals | 40 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Voltage-Max | 5.1 V | |
| Output Voltage-Min | 0.9 V | |
| Package Body Material | UNSPECIFIED | |
| Package Code | HVQCCN | |
| Package Equivalence Code | LCC40,.24SQ,20 | |
| Package Shape | SQUARE | |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 0.8 mm | |
| Surface Mount | YES | |
| Switcher Configuration | BUCK | |
| Switching Frequency-Max | 1500 kHz | |
| Temperature Grade | AUTOMOTIVE | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | NO LEAD | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | QUAD | |
| Width | 6 mm |
Alternate Parts for XRP7714ILBTR-F
This table gives cross-reference parts and alternative options found for XRP7714ILBTR-F. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of XRP7714ILBTR-F, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| XRP7714ILBTR-F | Exar Corporation | Check for Price | Switching Controller, Voltage-mode, 1500kHz Switching Freq-Max, 6 X 6 MM, GREEN, MO-220WJJD-5, TQFN-40 | XRP7714ILBTR-F vs XRP7714ILBTR-F |
XRP7714ILBTR-F Frequently Asked Questions (FAQ)
-
For optimal performance, it is recommended to follow the PCB layout guidelines provided in the application note AN-215 from MaxLinear Inc. Additionally, ensure a minimum of 2-3 thermal vias under the device to dissipate heat effectively.
-
To optimize power consumption, ensure that the device is operated in the lowest possible power mode (e.g., standby mode) when not in use. Additionally, consider using a power gating technique to reduce power consumption during idle periods.
-
The recommended settings for the internal voltage regulators can be found in the device's datasheet, section 7.1. It is essential to follow these settings to ensure proper device operation and prevent damage.
-
To troubleshoot clocking and synchronization issues, start by verifying the clock signal quality and ensuring that the clock frequency is within the recommended range. Also, check the device's clock configuration registers to ensure they are set correctly.
-
To prevent ESD damage, handle the device by the body or use an anti-static wrist strap. Ensure that the device is stored in an anti-static bag or container when not in use. Follow the ESD handling procedures outlined in the device's datasheet, section 10.