Part Details for XR76108ELTR-F by MaxLinear Inc
Results Overview of XR76108ELTR-F by MaxLinear Inc
- Distributor Offerings: (5 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Renewable Energy
Automotive
XR76108ELTR-F Information
XR76108ELTR-F by MaxLinear Inc is a Switching Regulator or Controller.
Switching Regulator or Controllers are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for XR76108ELTR-F
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
XR76108ELTR-F-ND
|
DigiKey | IC REG BUCK ADJ 8A 30QFN Min Qty: 3000 Lead time: 12 Weeks Container: Tape & Reel (TR) | Temporarily Out of Stock |
|
$3.1367 | Buy Now |
|
DISTI #
XR76108ELTR-F
|
Avnet Americas | POWERBLOX 8A SYNCHRONOUS STEP DOWN COT R - Tape and Reel (Alt: XR76108ELTR-F) RoHS: Compliant Min Qty: 3000 Package Multiple: 3000 Lead time: 20 Weeks, 0 Days Container: Reel | 0 |
|
$2.8426 / $3.0523 | Buy Now |
|
DISTI #
701-76108ELTR-F
|
Mouser Electronics | Switching Voltage Regulators PowerBlox 8A Sync S tep Down COT Reg RoHS: Compliant | 0 |
|
$3.1300 | Order Now |
|
|
LCSC | Step-down type Adjustable 4.5V22V 8A QFN-30(5x5) DC-DC Converters ROHS | 11185 |
|
$1.1294 / $1.9215 | Buy Now |
|
|
New Advantage Corporation | RoHS: Compliant Min Qty: 1 Package Multiple: 3000 | 6000 |
|
$3.9800 / $4.3200 | Buy Now |
Part Details for XR76108ELTR-F
XR76108ELTR-F CAD Models
XR76108ELTR-F Part Data Attributes
|
|
XR76108ELTR-F
MaxLinear Inc
Buy Now
Datasheet
|
Compare Parts:
XR76108ELTR-F
MaxLinear Inc
Switching Regulator,
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | MAXLINEAR INC | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Factory Lead Time | 20 Weeks | |
| Samacsys Manufacturer | MaxLinear, Inc. | |
| Analog IC - Other Type | SWITCHING REGULATOR | |
| Control Mode | CURRENT-MODE | |
| Input Voltage-Max | 22 V | |
| Input Voltage-Min | 4.5 V | |
| Input Voltage-Nom | 12 V | |
| JESD-30 Code | S-XQCC-N30 | |
| Length | 5 mm | |
| Number of Functions | 1 | |
| Number of Terminals | 30 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Current-Max | 8 A | |
| Package Body Material | UNSPECIFIED | |
| Package Code | QCCN | |
| Package Shape | SQUARE | |
| Package Style | CHIP CARRIER, VERY THIN PROFILE | |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED | |
| Seated Height-Max | 1 mm | |
| Surface Mount | YES | |
| Switcher Configuration | BUCK | |
| Switching Frequency-Max | 800 kHz | |
| Temperature Grade | AUTOMOTIVE | |
| Terminal Form | NO LEAD | |
| Terminal Position | QUAD | |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED | |
| Width | 5 mm |
XR76108ELTR-F Frequently Asked Questions (FAQ)
-
MaxLinear recommends a 4-layer PCB with a solid ground plane, and thermal vias under the IC to dissipate heat. A thermal pad on the bottom of the package should be connected to a heat sink or a thermal plane on the PCB.
-
To minimize power consumption, ensure the device is in the correct power mode (e.g., low-power mode), reduce the clock frequency, and minimize the number of active channels. Additionally, consider using a low-dropout regulator (LDO) to reduce power supply noise.
-
The internal voltage regulators should be set to the recommended values in the datasheet (e.g., 1.2V for the analog supply and 1.8V for the digital supply). Adjusting these values may affect performance and stability.
-
Use the device's built-in diagnostic features, such as the error detection and correction mechanisms. Also, verify the PCB layout, power supply, and clock signal integrity. Consult the datasheet and application notes for troubleshooting guidelines.
-
Yes, follow proper EMI/EMC design practices, such as using a shielded enclosure, minimizing trace lengths, and using EMI filters or common-mode chokes on the power supply lines. Ensure the PCB layout is optimized for EMI reduction.