-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for UPC4072G2-A by Renesas Electronics Corporation
Results Overview of UPC4072G2-A by Renesas Electronics Corporation
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (3 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
UPC4072G2-A Information
UPC4072G2-A by Renesas Electronics Corporation is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Part Details for UPC4072G2-A
UPC4072G2-A CAD Models
UPC4072G2-A Part Data Attributes
|
|
UPC4072G2-A
Renesas Electronics Corporation
Buy Now
Datasheet
|
Compare Parts:
UPC4072G2-A
Renesas Electronics Corporation
J-FET Input LOW-NOISE DUAL OperationAL AMPLIFIER, SOP, /
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | RENESAS ELECTRONICS CORP | |
| Part Package Code | SOP | |
| Package Description | 0.225 INCH, PLASTIC, SOP-8 | |
| Pin Count | 8 | |
| Manufacturer Package Code | PRSP0008DL-A8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | 5A002 | |
| HTS Code | 8542.33.00.01 | |
| Samacsys Manufacturer | Renesas Electronics | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | VOLTAGE-FEEDBACK | |
| Average Bias Current-Max (IIB) | 0.0002 µA | |
| Bias Current-Max (IIB) @25C | 0.0002 µA | |
| Common-mode Reject Ratio-Nom | 86 dB | |
| Frequency Compensation | YES | |
| Input Offset Current-Max (IIO) | 0.00005 µA | |
| Input Offset Voltage-Max | 10000 µV | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e6 | |
| Length | 5.2 mm | |
| Low-Bias | YES | |
| Low-Offset | NO | |
| Micropower | NO | |
| Neg Supply Voltage Limit-Max | -18 V | |
| Neg Supply Voltage-Nom (Vsup) | -15 V | |
| Number of Functions | 2 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 80 °C | |
| Operating Temperature-Min | -20 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Power | NO | |
| Programmable Power | NO | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.8 mm | |
| Slew Rate-Nom | 13 V/us | |
| Supply Current-Max | 5 mA | |
| Supply Voltage Limit-Max | 18 V | |
| Supply Voltage-Nom (Vsup) | 15 V | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Temperature Grade | COMMERCIAL EXTENDED | |
| Terminal Finish | TIN BISMUTH | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 10 | |
| Unity Gain BW-Nom | 3000 | |
| Voltage Gain-Min | 25000 | |
| Wideband | NO | |
| Width | 4.4 mm |
Alternate Parts for UPC4072G2-A
This table gives cross-reference parts and alternative options found for UPC4072G2-A. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of UPC4072G2-A, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| UPC4072G2-T2-A | Renesas Electronics Corporation | Check for Price | IC,OP-AMP,DUAL,BIPOLAR/JFET,SOP,8PIN,PLASTIC | UPC4072G2-A vs UPC4072G2-T2-A |
| UPC4072G2-T1-A | Renesas Electronics Corporation | Check for Price | IC,OP-AMP,DUAL,BIPOLAR/JFET,SOP,8PIN,PLASTIC | UPC4072G2-A vs UPC4072G2-T1-A |
| UPC4072G2-E1-A | Renesas Electronics Corporation | Check for Price | J-FET Input LOW-NOISE DUAL OperationAL AMPLIFIER, SOP, / | UPC4072G2-A vs UPC4072G2-E1-A |
UPC4072G2-A Frequently Asked Questions (FAQ)
-
The recommended operating temperature range for UPC4072G2-A is -40°C to +85°C, as specified in the datasheet. However, it's essential to note that the device can operate at a wider temperature range, but with reduced performance and reliability.
-
To ensure the stability of the output voltage in UPC4072G2-A, it's crucial to follow the recommended layout and component selection guidelines provided in the datasheet. Additionally, using a high-quality output capacitor with low ESR and a suitable output voltage divider can help maintain stability.
-
The maximum input voltage that UPC4072G2-A can handle is 18V, as specified in the datasheet. Exceeding this voltage can cause damage to the device or affect its performance.
-
The output current capability of UPC4072G2-A can be calculated based on the device's power dissipation and thermal characteristics. The datasheet provides a formula to calculate the maximum output current, taking into account the device's junction temperature and thermal resistance.
-
When designing a PCB layout for UPC4072G2-A, it's essential to consider the device's thermal characteristics, noise sensitivity, and power supply decoupling. A good layout should ensure minimal thermal resistance, reduce noise coupling, and provide adequate power supply decoupling to ensure stable operation.