Part Details for UDN2540B by Allegro MicroSystems LLC
Results Overview of UDN2540B by Allegro MicroSystems LLC
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Aerospace and Defense
Agriculture Technology
Automotive
Robotics and Drones
UDN2540B Information
UDN2540B by Allegro MicroSystems LLC is a Peripheral Driver.
Peripheral Drivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for UDN2540B
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 1463 |
|
RFQ | ||
|
|
Chip 1 Exchange | INSTOCK | 20 |
|
RFQ |
Part Details for UDN2540B
UDN2540B CAD Models
UDN2540B Part Data Attributes
|
|
UDN2540B
Allegro MicroSystems LLC
Buy Now
Datasheet
|
Compare Parts:
UDN2540B
Allegro MicroSystems LLC
Buffer/Inverter Based Peripheral Driver, 4 Driver, 2.5A, BIPolar, PDIP16, DIP-16
|
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ALLEGRO MICROSYSTEMS LLC | |
| Part Package Code | DIP | |
| Package Description | DIP-16 | |
| Pin Count | 16 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Built-in Protections | TRANSIENT | |
| Driver Number of Bits | 4 | |
| Input Characteristics | STANDARD | |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER | |
| JESD-30 Code | R-PDIP-T16 | |
| JESD-609 Code | e0 | |
| Length | 19.175 mm | |
| Number of Functions | 1 | |
| Number of Terminals | 16 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -20 °C | |
| Output Characteristics | OPEN-COLLECTOR | |
| Output Current Flow Direction | SOURCE | |
| Output Current-Max | 1.8 A | |
| Output Peak Current Limit-Nom | 2.5 A | |
| Output Polarity | INVERTED | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | DIP | |
| Package Equivalence Code | DIP16,.3 | |
| Package Shape | RECTANGULAR | |
| Package Style | IN-LINE | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 5.33 mm | |
| Supply Voltage-Max | 5.25 V | |
| Supply Voltage-Min | 4.75 V | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | NO | |
| Technology | BIPOLAR | |
| Temperature Grade | OTHER | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Pitch | 2.54 mm | |
| Terminal Position | DUAL | |
| Width | 7.62 mm |
Alternate Parts for UDN2540B
This table gives cross-reference parts and alternative options found for UDN2540B. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of UDN2540B, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| A5895SLWTR | Allegro MicroSystems LLC | Check for Price | SIPO Based Peripheral Driver, 0.25A, BIMOS, PDSO16, SOIC-16 | UDN2540B vs A5895SLWTR |
| L6221CN | STMicroelectronics | Check for Price | 3.2A 4 CHANNEL, AND GATE BASED PRPHL DRVR, PZFM15, MULTIWATT-15 | UDN2540B vs L6221CN |
| CA3262AM | Intersil Corporation | Check for Price | 1.2A 4 CHANNEL, BUF OR INV BASED PRPHL DRVR, PDSO24, PLASTIC, MS-013AD, SOIC-24 | UDN2540B vs CA3262AM |
| UDQ2549EB | Allegro MicroSystems LLC | Check for Price | Buffer/Inverter Based Peripheral Driver, 4 Driver, 1A, CMOS, PQCC28, PLASTIC, LCC-28 | UDN2540B vs UDQ2549EB |
| L6221N | STMicroelectronics | Check for Price | 3.2A 4 CHANNEL, BUF OR INV BASED PRPHL DRVR, PSFM15, MULTIWATT-15 | UDN2540B vs L6221N |
| UDN2549EB | Allegro MicroSystems LLC | Check for Price | Buffer/Inverter Based Peripheral Driver, 4 Driver, 1A, CMOS, PQCC28, PLASTIC, LCC-28 | UDN2540B vs UDN2549EB |
| UDQ2549EBTR | Allegro MicroSystems LLC | Check for Price | Buffer/Inverter Based Peripheral Driver, 1A, CMOS, PQCC28, PLASTIC, LCC-28 | UDN2540B vs UDQ2549EBTR |
| UDN2543EB | Allegro MicroSystems LLC | Check for Price | Buffer/Inverter Based Peripheral Driver, 4 Driver, 1A, BIPolar, PQCC28, PLASTIC, LCC-28 | UDN2540B vs UDN2543EB |
| CA3262AM96 | Rochester Electronics LLC | Check for Price | Buffer/Inverter Based Peripheral Driver, PDSO24, PLASTIC, SOIC-24 | UDN2540B vs CA3262AM96 |
| UDQ2559B-T | Allegro MicroSystems LLC | Check for Price | And Gate Based Peripheral Driver, 4 Driver, 1A, BIPolar, PDIP16, LEAD FREE, MS-001BB, DIP-16 | UDN2540B vs UDQ2559B-T |
UDN2540B Frequently Asked Questions (FAQ)
-
The maximum current rating of the UDN2540B is 40A, but it's recommended to derate the current to 30A for continuous operation to ensure reliability and prevent overheating.
-
The UDN2540B has an internal voltage regulator, but it's still recommended to add external overvoltage protection (OVP) circuitry to prevent damage from voltage spikes or transients.
-
The minimum input voltage required for the UDN2540B is 5.5V, but it's recommended to use a minimum of 6V to ensure proper operation and to account for voltage drops in the system.
-
The UDN2540B is rated for operation up to 150°C, but it's recommended to derate the current and voltage ratings at higher temperatures to ensure reliability and prevent overheating.
-
To troubleshoot issues with the UDN2540B, check the input voltage, output current, and temperature. Use an oscilloscope to check for voltage spikes or transients, and verify that the device is properly soldered and connected.