-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for TPS76350DBVT by Texas Instruments
Results Overview of TPS76350DBVT by Texas Instruments
- Distributor Offerings: (5 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (9 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Energy and Power Systems
Transportation and Logistics
Renewable Energy
Automotive
TPS76350DBVT Information
TPS76350DBVT by Texas Instruments is a Linear Regulator IC.
Linear Regulator ICs are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for TPS76350DBVT
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
296-2707-1-ND
|
DigiKey | IC REG LINEAR 5V 150MA SOT23-5 Min Qty: 1 Lead time: 6 Weeks Container: Digi-Reel®, Cut Tape (CT), Tape & Reel (TR) |
1295 In Stock |
|
$0.4768 / $1.0500 | Buy Now |
|
DISTI #
595-TPS76350DBVT
|
Mouser Electronics | LDO Voltage Regulators 5.0V 150mA LDO A 595-TPS76350DBVR RoHS: Compliant | 41632 |
|
$0.4870 / $1.0500 | Buy Now |
|
|
Bristol Electronics | 1119 |
|
RFQ | ||
|
DISTI #
TPS76350DBVT
|
TME | IC: voltage regulator, LDO,fixed, 5V, 0.15A, SOT23-5, SMD, Ch: 1 Min Qty: 1 | 510 |
|
$0.5070 / $1.1200 | Buy Now |
|
|
LCSC | 150mA 60dB(1kHz) Fixed 5V Positive electrode 10V SOT-23-5 Voltage Regulators - Linear Low Drop Out (LDO) Regulators ROHS | 79 |
|
$0.2803 / $0.5392 | Buy Now |
Part Details for TPS76350DBVT
TPS76350DBVT CAD Models
TPS76350DBVT Part Data Attributes
|
|
TPS76350DBVT
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
TPS76350DBVT
Texas Instruments
150-mA, 10-V, low-dropout voltage regulator with enable 5-SOT-23 -40 to 125
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | TEXAS INSTRUMENTS INC | |
| Part Package Code | SOT-23 | |
| Pin Count | 5 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Texas Instruments | |
| Adjustability | FIXED | |
| Dropout Voltage1-Max | 0.3 V | |
| Dropout Voltage1-Nom | 0.375 V | |
| Input Voltage Absolute-Max | 10 V | |
| Input Voltage-Max | 10 V | |
| Input Voltage-Min | 6 V | |
| JESD-30 Code | R-PDSO-G5 | |
| JESD-609 Code | e4 | |
| Length | 2.9 mm | |
| Line Regulation-Max | 0.02% | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Outputs | 1 | |
| Number of Terminals | 5 | |
| Operating Temperature TJ-Max | 125 °C | |
| Operating Temperature TJ-Min | -40 °C | |
| Output Current1-Max | 0.15 A | |
| Output Voltage1-Max | 5.2 V | |
| Output Voltage1-Min | 4.8 V | |
| Output Voltage1-Nom | 5 V | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | LSSOP | |
| Package Equivalence Code | TSOP5/6,.11,37 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, LOW PROFILE, SHRINK PITCH | |
| Packing Method | TR, 7 INCH | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Regulator Type | FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR | |
| Seated Height-Max | 1.45 mm | |
| Surface Mount | YES | |
| Technology | PMOS | |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.95 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Voltage Tolerance-Max | 4% | |
| Width | 1.6 mm |
Alternate Parts for TPS76350DBVT
This table gives cross-reference parts and alternative options found for TPS76350DBVT. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of TPS76350DBVT, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| TPS76350QDBVRQ1 | Texas Instruments | $0.6222 | Automotive 150mA, 10V, low-dropout voltage regulator with enable 5-SOT-23 -40 to 125 | TPS76350DBVT vs TPS76350QDBVRQ1 |
| TPS76350DBVRG4 | Texas Instruments | Check for Price | 150-mA, 10-V, low-dropout voltage regulator with enable 5-SOT-23 -40 to 125 | TPS76350DBVT vs TPS76350DBVRG4 |
| TPS76350QDBVRG4Q1 | Texas Instruments | Check for Price | Automotive 150mA, 10V, low-dropout voltage regulator with enable 5-SOT-23 -40 to 125 | TPS76350DBVT vs TPS76350QDBVRG4Q1 |
| XD1212C452PR-G | IXYS Corporation | Check for Price | FIXED POSITIVE LDO REGULATOR | TPS76350DBVT vs XD1212C452PR-G |
| IXD1212C452PR-G | IXYS Corporation | Check for Price | Fixed Positive LDO Regulator, 4.5V, 0.23V Dropout, CMOS, PDSO5, SOT-89, 5 PIN | TPS76350DBVT vs IXD1212C452PR-G |
| IXD1212C452DR-G | IXYS Corporation | Check for Price | Fixed Positive LDO Regulator, 4.5V, 0.23V Dropout, CMOS, PDSO6, USP-6 | TPS76350DBVT vs IXD1212C452DR-G |
| IXD1212C452MR-G | IXYS Corporation | Check for Price | Fixed Positive LDO Regulator, 4.5V, 0.23V Dropout, CMOS, PDSO5, SOT-25, 5 PIN | TPS76350DBVT vs IXD1212C452MR-G |
| IXD1212C452DR | IXYS Corporation | Check for Price | Fixed Positive LDO Regulator, 4.5V, 0.23V Dropout, CMOS, PDSO6, USP-6 | TPS76350DBVT vs IXD1212C452DR |
| XD1212C452MR | IXYS Corporation | Check for Price | FIXED POSITIVE LDO REGULATOR | TPS76350DBVT vs XD1212C452MR |
TPS76350DBVT Frequently Asked Questions (FAQ)
-
The maximum input voltage that can be applied to the TPS76350DBVT is 13.2V, but it's recommended to keep it below 12V for optimal performance and reliability.
-
To ensure stability, use a minimum output capacitance of 2.2uF with an ESR of 0.1Ω to 10Ω. Additionally, consider adding a 10nF to 100nF ceramic capacitor in parallel with the output capacitor to improve transient response.
-
A minimum input capacitance of 1uF is recommended to ensure stability and reduce input voltage ripple. However, a larger input capacitance may be required depending on the input voltage source and noise sensitivity.
-
Power dissipation (PD) can be calculated using the formula: PD = (VIN - VOUT) x IOUT + (VIN x IQ), where IQ is the quiescent current. Ensure the device is operated within the recommended operating junction temperature range to prevent overheating.
-
The EN (enable) pin is used to turn the regulator on or off. Connect EN to VIN to enable the regulator, or connect it to GND to disable it. Use a logic signal or a switch to control the EN pin to implement power sequencing or shutdown functionality.