-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for TPIC6B595DWR by Texas Instruments
Results Overview of TPIC6B595DWR by Texas Instruments
- Distributor Offerings: (8 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (4 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Computing and Data Storage
Electronic Manufacturing
TPIC6B595DWR Information
TPIC6B595DWR by Texas Instruments is a Peripheral Driver.
Peripheral Drivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for TPIC6B595DWR
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
296-1351-1-ND
|
DigiKey | IC PWR 8-BIT SHIFT REGIS 20-SOIC Min Qty: 1 Lead time: 12 Weeks Container: Cut Tape (CT), Digi-Reel®, Tape & Reel (TR) |
10123 In Stock |
|
$0.6014 / $1.3000 | Buy Now |
|
DISTI #
595-TPIC6B595DWR
|
Mouser Electronics | Counter Shift Registers Power 8-Bit Shift A 595-TPIC6B595DWRG4 RoHS: Compliant | 13546 |
|
$0.5940 / $1.3000 | Buy Now |
|
|
Bristol Electronics | Min Qty: 2 | 52 |
|
$1.4000 / $2.8000 | Buy Now |
|
|
Quest Components | IC,SHIFT REGISTER,BIPOLAR/MOS,SOP,20PIN,PLASTIC | 41 |
|
$1.8750 / $3.7500 | Buy Now |
|
|
ComSIT USA | Electronic Component RoHS: Not Compliant |
|
|
RFQ | |
|
DISTI #
TPIC6B595DWR
|
Chip One Stop | Semiconductors RoHS: Compliant pbFree: Yes Min Qty: 1 Lead time: 0 Weeks, 1 Days Container: Cut Tape | 600 |
|
$0.6880 / $1.2400 | Buy Now |
|
|
LCSC | 4.5V5.5V 1 Serial to serial or parallel SOIC-20-300mil Shift Registers ROHS | 114 |
|
$0.5758 / $1.1027 | Buy Now |
|
|
Win Source Electronics | IC PWR 8-BIT SHIFT REGIS 20-SOIC | 41700 |
|
$0.5775 / $0.7459 | Buy Now |
Part Details for TPIC6B595DWR
TPIC6B595DWR CAD Models
TPIC6B595DWR Part Data Attributes
|
|
TPIC6B595DWR
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
TPIC6B595DWR
Texas Instruments
8-bit shift register with 150mA/ch 20-SOIC -40 to 125
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | TEXAS INSTRUMENTS INC | |
| Part Package Code | SOIC | |
| Package Description | SOIC-20 | |
| Pin Count | 20 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Texas Instruments | |
| Built-in Protections | TRANSIENT | |
| Driver Number of Bits | 8 | |
| Input Characteristics | STANDARD | |
| Interface IC Type | REGISTER BASED PERIPHERAL DRIVER | |
| JESD-30 Code | R-PDSO-G20 | |
| JESD-609 Code | e4 | |
| Length | 12.8 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Channels | 8 | |
| Number of Functions | 1 | |
| Number of Terminals | 20 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Characteristics | OPEN-DRAIN | |
| Output Current Flow Direction | SINK | |
| Output Current-Max | 0.15 A | |
| Output Peak Current Limit-Nom | 0.5 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP20,.4 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 2.65 mm | |
| Supply Current-Max | 0.3 mA | |
| Supply Voltage-Max | 5.5 V | |
| Supply Voltage-Min | 4.5 V | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | YES | |
| Temperature Grade | AUTOMOTIVE | |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 7.5 mm |
Alternate Parts for TPIC6B595DWR
This table gives cross-reference parts and alternative options found for TPIC6B595DWR. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of TPIC6B595DWR, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| A6B595KLW-T | Allegro MicroSystems LLC | Check for Price | Latch Based Peripheral Driver, 0.5A, NMOS, PDSO20, LEAD FREE, PLASTIC, SOIC-20 | TPIC6B595DWR vs A6B595KLW-T |
| TPIC6B595DWG4 | Texas Instruments | Check for Price | 8-bit shift register with 150mA/ch 20-SOIC | TPIC6B595DWR vs TPIC6B595DWG4 |
| A6B595KLWTR | Allegro MicroSystems LLC | Check for Price | Latch Based Peripheral Driver, 0.5A, NMOS, PDSO20, PLASTIC, SOIC-20 | TPIC6B595DWR vs A6B595KLWTR |
| A6B595KA | Allegro MicroSystems LLC | Check for Price | Latch Based Peripheral Driver, 0.5A, NMOS, PDIP20, PLASTIC, DIP-20 | TPIC6B595DWR vs A6B595KA |
TPIC6B595DWR Frequently Asked Questions (FAQ)
-
The maximum frequency of the clock input is 30 MHz, but it's recommended to operate at 10 MHz or less for reliable operation.
-
It's recommended to power up the VCC pin first, followed by the VCCIO pin. This ensures that the internal voltage regulator is powered up correctly.
-
The maximum current rating for each output pin is 150 mA. However, the total current drawn from the device should not exceed 1.5 A.
-
It's recommended to use a flyback diode or a freewheeling diode across the output pins to protect against back-EMF. This is especially important when driving inductive loads.
-
Yes, the TPIC6B595DWR can be used to drive LEDs directly. However, it's recommended to use a current-limiting resistor in series with the LED to prevent overcurrent.