-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Quad, 6-V, 220-kHz, low quiescent current (23-µA), RRIO operational amplifier 14-SOIC -40 to 125
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
TLV2454IDR by Texas Instruments is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Part # | Distributor | Description | Stock | Price | Buy | |
---|---|---|---|---|---|---|
DISTI #
296-10597-1-ND
|
DigiKey | IC OPAMP GP 4 CIRCUIT 14SOIC Min Qty: 1 Lead time: 6 Weeks Container: Cut Tape (CT), Digi-Reel®, Tape & Reel (TR) |
7681 In Stock |
|
$1.5005 / $2.9000 | Buy Now |
DISTI #
595-TLV2454IDR
|
Mouser Electronics | Operational Amplifiers - Op Amps Quad Mcrpwr R-to-R I nput/Output Op Amp A 595-TLV2454ID RoHS: Compliant | 2323 |
|
$1.1500 / $2.9000 | Buy Now |
|
Vyrian | Amplifiers | 18834 |
|
RFQ | |
|
Win Source Electronics | IC OPAMP GP 220KHZ RRO 14SOIC | 14000 |
|
$1.6683 / $2.5024 | Buy Now |
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
|
TLV2454IDR
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
TLV2454IDR
Texas Instruments
Quad, 6-V, 220-kHz, low quiescent current (23-µA), RRIO operational amplifier 14-SOIC -40 to 125
|
Pbfree Code | Yes | |
Rohs Code | Yes | |
Part Life Cycle Code | Active | |
Ihs Manufacturer | TEXAS INSTRUMENTS INC | |
Part Package Code | SOIC | |
Package Description | GREEN, PLASTIC, SOIC-14 | |
Pin Count | 14 | |
Reach Compliance Code | compliant | |
ECCN Code | EAR99 | |
HTS Code | 8542.33.00.01 | |
Samacsys Manufacturer | Texas Instruments | |
Amplifier Type | OPERATIONAL AMPLIFIER | |
Architecture | VOLTAGE-FEEDBACK | |
Average Bias Current-Max (IIB) | 0.007 µA | |
Bias Current-Max (IIB) @25C | 0.005 µA | |
Common-mode Reject Ratio-Min | 70 dB | |
Common-mode Reject Ratio-Nom | 80 dB | |
Frequency Compensation | YES | |
Input Offset Current-Max (IIO) | 0.00045 µA | |
Input Offset Voltage-Max | 1500 µV | |
JESD-30 Code | R-PDSO-G14 | |
JESD-609 Code | e4 | |
Length | 8.65 mm | |
Low-Bias | NO | |
Low-Offset | NO | |
Micropower | YES | |
Moisture Sensitivity Level | 1 | |
Number of Functions | 4 | |
Number of Terminals | 14 | |
Operating Temperature-Max | 125 °C | |
Operating Temperature-Min | -40 °C | |
Package Body Material | PLASTIC/EPOXY | |
Package Code | SOP | |
Package Equivalence Code | SOP14,.25 | |
Package Shape | RECTANGULAR | |
Package Style | SMALL OUTLINE | |
Packing Method | TR | |
Peak Reflow Temperature (Cel) | 260 | |
Power | NO | |
Programmable Power | NO | |
Qualification Status | Not Qualified | |
Seated Height-Max | 1.75 mm | |
Slew Rate-Min | 0.02 V/us | |
Slew Rate-Nom | 0.11 V/us | |
Supply Current-Max | 0.168 mA | |
Supply Voltage Limit-Max | 7 V | |
Supply Voltage-Nom (Vsup) | 3 V | |
Surface Mount | YES | |
Technology | CMOS | |
Temperature Grade | AUTOMOTIVE | |
Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) | |
Terminal Form | GULL WING | |
Terminal Pitch | 1.27 mm | |
Terminal Position | DUAL | |
Time@Peak Reflow Temperature-Max (s) | 30 | |
Unity Gain BW-Nom | 220 | |
Voltage Gain-Min | 63095 | |
Wideband | NO | |
Width | 3.9 mm |
This table gives cross-reference parts and alternative options found for TLV2454IDR. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of TLV2454IDR, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
Part Number | Manufacturer | Composite Price | Description | Compare |
---|---|---|---|---|
TLV2454AIDR | Texas Instruments | $2.5147 | Quad, 6-V, 220-kHz, low quiescent current (23-µA), 1-mV offset, RRIO operational amplifier 14-SOIC -40 to 125 | TLV2454IDR vs TLV2454AIDR |
TLV2454ID | Texas Instruments | Check for Price | Quad, 6-V, 220-kHz, low quiescent current (23-µA), RRIO operational amplifier 14-SOIC -40 to 125 | TLV2454IDR vs TLV2454ID |
TLV2454IDRG4 | Texas Instruments | Check for Price | Quad, 6-V, 220-kHz, low quiescent current (23-µA), RRIO operational amplifier 14-SOIC -40 to 125 | TLV2454IDR vs TLV2454IDRG4 |
TLV2454AIDRG4 | Texas Instruments | Check for Price | QUAD OP-AMP, 1300uV OFFSET-MAX, 0.2MHz BAND WIDTH, PDSO14, GREEN, PLASTIC, SOIC-14 | TLV2454IDR vs TLV2454AIDRG4 |
TLV2454AID | Texas Instruments | Check for Price | Quad, 6-V, 220-kHz, low quiescent current (23-µA), 1-mV offset, RRIO operational amplifier 14-SOIC -40 to 125 | TLV2454IDR vs TLV2454AID |
TLV2454CDRG4 | Texas Instruments | Check for Price | IC QUAD OP-AMP, 2000 uV OFFSET-MAX, 0.2 MHz BAND WIDTH, PDSO14, PLASTIC, SOIC-14, Operational Amplifier | TLV2454IDR vs TLV2454CDRG4 |
TLV2454CD | Texas Instruments | Check for Price | Quad, 6-V, 220-kHz, low quiescent current (23-µA), RRIO operational amplifier 14-SOIC 0 to 70 | TLV2454IDR vs TLV2454CD |
TLV2454CDG4 | Texas Instruments | Check for Price | QUAD OP-AMP, 2000uV OFFSET-MAX, 0.2MHz BAND WIDTH, PDSO14, GREEN, PLASTIC, SOIC-14 | TLV2454IDR vs TLV2454CDG4 |
TLV2454CDR | Texas Instruments | Check for Price | QUAD OP-AMP, 2000uV OFFSET-MAX, 0.2MHz BAND WIDTH, PDSO14, GREEN, PLASTIC, SOIC-14 | TLV2454IDR vs TLV2454CDR |
TLV2454AIDG4 | Texas Instruments | Check for Price | QUAD OP-AMP, 1300uV OFFSET-MAX, 0.2MHz BAND WIDTH, PDSO14, GREEN, PLASTIC, SOIC-14 | TLV2454IDR vs TLV2454AIDG4 |
The TLV2454IDR can operate from -40°C to 125°C, making it suitable for a wide range of applications.
The TLV2454IDR requires a single 2.5V to 5.5V power supply, and it's recommended to use a decoupling capacitor of 0.1uF to 1uF between VCC and GND to ensure stable operation.
The TLV2454IDR can handle input voltages up to 6V, but it's recommended to keep the input voltage within the power supply voltage (VCC) to ensure proper operation.
To reduce power consumption, you can use the shutdown mode (SHDN) pin to turn off the device when not in use. Additionally, you can reduce the power supply voltage (VCC) to the minimum required for your application.
The typical propagation delay for the TLV2454IDR is around 3.5ns, but this can vary depending on the specific application and operating conditions.