Part Details for TLE7230G by Infineon Technologies AG
Results Overview of TLE7230G by Infineon Technologies AG
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
TLE7230G Information
TLE7230G by Infineon Technologies AG is a Peripheral Driver.
Peripheral Drivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for TLE7230G
Part # | Distributor | Description | Stock | Price | Buy | |
---|---|---|---|---|---|---|
|
ComSIT USA | Electronic Component RoHS: Compliant |
|
|
RFQ | |
DISTI #
SP000311687
|
EBV Elektronik | Power Switch Lo Side 1A 24Pin DSO (Alt: SP000311687) RoHS: Compliant Min Qty: 1000 Package Multiple: 1000 Lead time: 143 Weeks, 0 Days | EBV - 0 |
|
Buy Now |
Part Details for TLE7230G
TLE7230G CAD Models
TLE7230G Part Data Attributes
|
TLE7230G
Infineon Technologies AG
Buy Now
Datasheet
|
Compare Parts:
TLE7230G
Infineon Technologies AG
Buffer/Inverter Based Peripheral Driver, 8 Driver, 1A, MOS, PDSO24, GREEN, PLASTIC, SOP-24
|
Rohs Code | Yes | |
Part Life Cycle Code | Obsolete | |
Ihs Manufacturer | INFINEON TECHNOLOGIES AG | |
Part Package Code | SOIC | |
Package Description | GREEN, PLASTIC, SOP-24 | |
Pin Count | 24 | |
Reach Compliance Code | compliant | |
ECCN Code | EAR99 | |
HTS Code | 8542.39.00.01 | |
Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL | |
Driver Number of Bits | 8 | |
Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER | |
JESD-30 Code | R-PDSO-G24 | |
JESD-609 Code | e3 | |
Length | 15.6 mm | |
Moisture Sensitivity Level | 3 | |
Number of Functions | 1 | |
Number of Terminals | 24 | |
Output Current Flow Direction | SINK | |
Output Peak Current Limit-Nom | 1 A | |
Package Body Material | PLASTIC/EPOXY | |
Package Code | SOP | |
Package Equivalence Code | SOP24,.4 | |
Package Shape | RECTANGULAR | |
Package Style | SMALL OUTLINE | |
Qualification Status | Not Qualified | |
Screening Level | AEC-Q100 | |
Seated Height-Max | 2.65 mm | |
Supply Voltage-Max | 5.5 V | |
Supply Voltage-Min | 4.5 V | |
Supply Voltage-Nom | 5 V | |
Surface Mount | YES | |
Technology | MOS | |
Terminal Finish | MATTE TIN | |
Terminal Form | GULL WING | |
Terminal Pitch | 1.27 mm | |
Terminal Position | DUAL | |
Turn-off Time | 60 µs | |
Turn-on Time | 60 µs | |
Width | 7.6 mm |
TLE7230G Frequently Asked Questions (FAQ)
-
The TLE7230G can operate in a temperature range of -40°C to 150°C, making it suitable for automotive and industrial applications.
-
To ensure EMC, follow proper PCB design guidelines, use a common mode choke, and add a capacitor between the input and output stages. Additionally, use a shielded cable and connector for the output stage.
-
Place the TLE7230G near the power source, keep the input and output stages separate, and use a star-point connection for the ground pins. Avoid routing high-frequency signals near the device.
-
Use an oscilloscope to measure the input and output voltages, check for proper decoupling, and verify the PCB layout. Consult the datasheet and application notes for troubleshooting guidelines.
-
Yes, the TLE7230G is suitable for high-reliability applications due to its automotive-grade qualification, high temperature range, and low failure rate. However, consult with Infineon's technical support for specific requirements and certifications.