Part Details for TLE4906H by Infineon Technologies AG
Results Overview of TLE4906H by Infineon Technologies AG
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
TLE4906H Information
TLE4906H by Infineon Technologies AG is an Other Signal Circuit.
Other Signal Circuits are under the broader part category of Signal Circuits.
A signal is an electronic means of transmitting information, either as an analog signal with continuous values or a digital signal with discrete values. Signals are used in various systems and networks. Read more about Signal Circuits on our Signal Circuits part category page.
Price & Stock for TLE4906H
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
ComSIT USA | HIGH PRECISION HALL-EFFECT SWITCH Analog Circuit, 1 Func, PDSO3 ECCN: EAR99 RoHS: Not Compliant |
|
|
RFQ |
Part Details for TLE4906H
TLE4906H CAD Models
TLE4906H Part Data Attributes
|
|
TLE4906H
Infineon Technologies AG
Buy Now
Datasheet
|
Compare Parts:
TLE4906H
Infineon Technologies AG
Analog Circuit, 1 Func, PDSO3, PLASTIC, SC-59, SMD-3
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | INFINEON TECHNOLOGIES AG | |
| Part Package Code | SOIC | |
| Package Description | PLASTIC, SC-59, SMD-3 | |
| Pin Count | 3 | |
| Reach Compliance Code | compliant | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Infineon |
TLE4906H Frequently Asked Questions (FAQ)
-
The recommended PCB layout for the TLE4906H involves placing the device close to the load, using short and wide traces for the power lines, and separating the analog and digital grounds. A 4-layer PCB with a solid ground plane is also recommended to reduce EMI.
-
To ensure proper power-up and initialization, the TLE4906H requires a stable power supply, a correct reset sequence, and a valid input signal on the EN pin. The device should also be powered up in a specific sequence, with VCC being applied before VBAT.
-
The maximum allowed voltage on the EN pin is VCC + 0.3V. Exceeding this voltage may damage the device. It is recommended to use a voltage limiter or a resistor divider network to ensure the EN pin voltage remains within the specified range.
-
The TLE4906H has a built-in thermal shutdown feature that activates when the junction temperature exceeds 160°C. To handle this feature, ensure proper heat sinking, reduce power consumption, and implement a thermal monitoring and shutdown mechanism in the system design.
-
The recommended frequency range for the input signal on the IN pin is 100 Hz to 100 kHz. Operating the device outside this range may affect its performance and accuracy.