-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Quad, 16-V, 10-MHz, In to V- op amp 14-SOIC -40 to 125
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
TLC084IDR by Texas Instruments is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Part # | Distributor | Description | Stock | Price | Buy | |
---|---|---|---|---|---|---|
DISTI #
296-7287-1-ND
|
DigiKey | IC OPAMP GP 4 CIRCUIT 14SOIC Min Qty: 1 Lead time: 6 Weeks Container: Digi-Reel®, Cut Tape (CT), Tape & Reel (TR) | Temporarily Out of Stock |
|
$1.2985 / $2.5700 | Buy Now |
DISTI #
595-TLC084IDR
|
Mouser Electronics | Operational Amplifiers - Op Amps Quad Wide Bandwidth Hi-Output Sngl Sply A 595-TLC084ID RoHS: Compliant | 2480 |
|
$1.2600 / $2.5900 | Buy Now |
|
Rochester Electronics | TLC084 Quad 16V, 10MHz, high output drive single supply op amp RoHS: Compliant Status: Active Min Qty: 1 | 57 |
|
$1.0200 / $1.2800 | Buy Now |
|
LCSC | QUAD 700pA 19V/us 3mV SOIC-14 Operational Amplifier ROHS | 14 |
|
$4.0827 / $4.2895 | Buy Now |
|
Vyrian | Amplifiers | 31029 |
|
RFQ |
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
|
TLC084IDR
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
TLC084IDR
Texas Instruments
Quad, 16-V, 10-MHz, In to V- op amp 14-SOIC -40 to 125
|
Pbfree Code | Yes | |
Rohs Code | Yes | |
Part Life Cycle Code | Active | |
Ihs Manufacturer | TEXAS INSTRUMENTS INC | |
Part Package Code | SOIC | |
Package Description | GREEN, PLASTIC, MS-012AB, SOIC-14 | |
Pin Count | 14 | |
Reach Compliance Code | compliant | |
ECCN Code | EAR99 | |
HTS Code | 8542.33.00.01 | |
Date Of Intro | 1999-06-01 | |
Samacsys Manufacturer | Texas Instruments | |
Amplifier Type | OPERATIONAL AMPLIFIER | |
Architecture | VOLTAGE-FEEDBACK | |
Average Bias Current-Max (IIB) | 0.0007 µA | |
Bias Current-Max (IIB) @25C | 0.00005 µA | |
Common-mode Reject Ratio-Min | 80 dB | |
Common-mode Reject Ratio-Nom | 110 dB | |
Frequency Compensation | YES | |
Input Offset Current-Max (IIO) | 0.00005 µA | |
Input Offset Voltage-Max | 1900 µV | |
JESD-30 Code | R-PDSO-G14 | |
JESD-609 Code | e4 | |
Length | 8.65 mm | |
Low-Bias | YES | |
Low-Offset | NO | |
Micropower | NO | |
Moisture Sensitivity Level | 1 | |
Number of Functions | 4 | |
Number of Terminals | 14 | |
Operating Temperature-Max | 125 °C | |
Operating Temperature-Min | -40 °C | |
Package Body Material | PLASTIC/EPOXY | |
Package Code | SOP | |
Package Equivalence Code | SOP14,.25 | |
Package Shape | RECTANGULAR | |
Package Style | SMALL OUTLINE | |
Packing Method | TR | |
Peak Reflow Temperature (Cel) | 260 | |
Power | NO | |
Programmable Power | NO | |
Qualification Status | Not Qualified | |
Seated Height-Max | 1.75 mm | |
Slew Rate-Min | 9.5 V/us | |
Slew Rate-Nom | 16 V/us | |
Supply Current-Max | 10 mA | |
Supply Voltage Limit-Max | 17 V | |
Supply Voltage-Nom (Vsup) | 5 V | |
Surface Mount | YES | |
Technology | BIMOS | |
Temperature Grade | AUTOMOTIVE | |
Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) | |
Terminal Form | GULL WING | |
Terminal Pitch | 1.27 mm | |
Terminal Position | DUAL | |
Time@Peak Reflow Temperature-Max (s) | 30 | |
Unity Gain BW-Nom | 10000 | |
Voltage Gain-Min | 100000 | |
Wideband | NO | |
Width | 3.9 mm |
This table gives cross-reference parts and alternative options found for TLC084IDR. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of TLC084IDR, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
Part Number | Manufacturer | Composite Price | Description | Compare |
---|---|---|---|---|
TLC084AID | Texas Instruments | $1.4955 | Quad, 16-V, 10-MHz, 1.4-mV offset voltage, In to V- op amp 14-SOIC -40 to 125 | TLC084IDR vs TLC084AID |
TLC084CD | Texas Instruments | $1.8220 | Quad, 16-V, 10-MHz, In to V- op amp 14-SOIC 0 to 70 | TLC084IDR vs TLC084CD |
TLC084IDG4 | Texas Instruments | Check for Price | Quad Wide Bandwidth High Output Drive Single Supply Op Amp 14-SOIC -40 to 125 | TLC084IDR vs TLC084IDG4 |
TLC084IDRG4 | Texas Instruments | Check for Price | Quad, 16-V, 10-MHz, In to V- op amp 14-SOIC -40 to 125 | TLC084IDR vs TLC084IDRG4 |
TLC084IDR | Rochester Electronics LLC | Check for Price | QUAD OP-AMP, 3000uV OFFSET-MAX, 10MHz BAND WIDTH, PDSO14, GREEN, PLASTIC, MS-012AB, SOIC-14 | TLC084IDR vs TLC084IDR |
TLC084AID | Rochester Electronics LLC | Check for Price | QUAD OP-AMP, 2000uV OFFSET-MAX, 10MHz BAND WIDTH, PDSO14, GREEN, PLASTIC, MS-012AB, SOIC-14 | TLC084IDR vs TLC084AID |
TLC084AIDRG4 | Texas Instruments | Check for Price | Quad Wide Bandwidth High Output Drive Single Supply Op Amp 14-SOIC -40 to 125 | TLC084IDR vs TLC084AIDRG4 |
TLC084CDRG4 | Texas Instruments | Check for Price | Quad Wide Bandwidth High Output Drive Single Supply Op Amp 14-SOIC 0 to 70 | TLC084IDR vs TLC084CDRG4 |
TLC084CD | Rochester Electronics LLC | Check for Price | QUAD OP-AMP, 3000uV OFFSET-MAX, 10MHz BAND WIDTH, PDSO14, GREEN, PLASTIC, MS-012AB, SOIC-14 | TLC084IDR vs TLC084CD |
TLC084AIDG4 | Texas Instruments | Check for Price | Quad, 16-V, 10-MHz, 1.4-mV offset voltage, In to V- op amp 14-SOIC -40 to 125 | TLC084IDR vs TLC084AIDG4 |
The TLC084IDR can operate from -40°C to 125°C, but the device's performance may degrade at extreme temperatures.
Handle the device by the body, avoid touching the pins, and store it in an anti-static bag or tube to prevent electrostatic discharge (ESD) damage.
Yes, but ensure the device is properly mounted and secured to prevent mechanical stress, which can cause solder joint failure or other reliability issues.
Power on the VCC supply before the analog input signals to prevent latch-up and ensure proper operation.
Check the power supply decoupling, analog input signal integrity, and PCB layout for noise coupling or impedance mismatches, which can cause oscillations or instability.