-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for TL082HIPWR by Texas Instruments
Results Overview of TL082HIPWR by Texas Instruments
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (2 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Industrial Automation
Electronic Manufacturing
TL082HIPWR Information
TL082HIPWR by Texas Instruments is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for TL082HIPWR
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
296-TL082HIPWRCT-ND
|
DigiKey | IC OPAMP JFET 2 CIRCUIT 8TSSOP Min Qty: 1 Lead time: 12 Weeks Container: Digi-Reel®, Tape & Reel (TR), Cut Tape (CT) |
7788 In Stock |
|
$0.0887 / $0.2400 | Buy Now |
|
DISTI #
595-TL082HIPWR
|
Mouser Electronics | Operational Amplifiers - Op Amps Dual 40-V 5.25-MHz 4-mV offset voltag RoHS: Compliant | 4708 |
|
$0.0870 / $0.5600 | Buy Now |
Part Details for TL082HIPWR
TL082HIPWR CAD Models
TL082HIPWR Part Data Attributes
|
|
TL082HIPWR
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
TL082HIPWR
Texas Instruments
Dual, 40-V, 5.25-MHz, 4-mV offset voltage, 20-V/µs, In to V+ op amp with -40°C to 125°C operation 8-TSSOP -40 to 125
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | TEXAS INSTRUMENTS INC | |
| Reach Compliance Code | compliant | |
| Samacsys Manufacturer | Texas Instruments | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | VOLTAGE-FEEDBACK | |
| Average Bias Current-Max (IIB) | 0.005 µA | |
| Bias Current-Max (IIB) @25C | 0.00012 µA | |
| Common-mode Reject Ratio-Min | 100 dB | |
| Common-mode Reject Ratio-Nom | 105 dB | |
| Frequency Compensation | NO | |
| Input Offset Current-Max (IIO) | 0.00012 µA | |
| Input Offset Voltage-Max | 4000 µV | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e4 | |
| Length | 4.4 mm | |
| Low-Bias | NO | |
| Low-Offset | NO | |
| Micropower | NO | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 2 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TSSOP | |
| Package Equivalence Code | TSSOP8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | |
| Packing Method | TR | |
| Peak Reflow Temperature (Cel) | 260 | |
| Power | NO | |
| Programmable Power | NO | |
| Seated Height-Max | 1.2 mm | |
| Slew Rate-Nom | 20 V/us | |
| Supply Current-Max | 2.25 mA | |
| Supply Voltage Limit-Max | 42 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Temperature Grade | AUTOMOTIVE | |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.65 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Unity Gain BW-Nom | 5250 | |
| Voltage Gain-Min | 562341 | |
| Wideband | NO | |
| Width | 3 mm |
Alternate Parts for TL082HIPWR
This table gives cross-reference parts and alternative options found for TL082HIPWR. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of TL082HIPWR, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| TL082HIDR | Texas Instruments | Check for Price | Dual, 40-V, 5.25-MHz, 4-mV offset voltage, 20-V/µs, In to V+ op amp with -40°C to 125°C operation 8-SOIC -40 to 125 | TL082HIPWR vs TL082HIDR |
| TL082HIDDFR | Texas Instruments | Check for Price | Dual, 40-V, 5.25-MHz, 4-mV offset voltage, 20-V/µs, In to V+ op amp with -40°C to 125°C operation 8-SOT-23-THIN -40 to 125 | TL082HIPWR vs TL082HIDDFR |
TL082HIPWR Frequently Asked Questions (FAQ)
-
The maximum power dissipation of the TL082HIPWR is 670mW, which is calculated based on the maximum junction temperature (TJ) of 150°C and the thermal resistance (RθJA) of 125°C/W.
-
Yes, the TL082HIPWR can be used in a single-supply configuration, but the input common-mode voltage range is limited to within 2V of the positive supply rail. Additionally, the output voltage swing will be reduced.
-
Texas Instruments recommends using a 0.1μF ceramic capacitor in parallel with a 10μF tantalum capacitor to decouple the power supply pins. This helps to filter out high-frequency noise and ensure stable operation.
-
While the TL082HIPWR is a general-purpose op-amp, it may not be the best choice for audio applications due to its relatively high noise floor and limited bandwidth. For audio applications, a dedicated audio op-amp like the OPA2134 or OPA827 may be a better choice.
-
The TL082HIPWR is rated for operation up to 125°C, but its performance may degrade at high temperatures. If your application requires operation above 85°C, you should consider using a more temperature-stable op-amp like the OPA333 or OPA4340.