-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for TL074ID by Texas Instruments
Results Overview of TL074ID by Texas Instruments
- Distributor Offerings: (8 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (6 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Industrial Automation
Computing and Data Storage
Healthcare
Agriculture Technology
Electronic Manufacturing
Robotics and Drones
TL074ID Information
TL074ID by Texas Instruments is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for TL074ID
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 469 |
|
RFQ | ||
|
|
Bristol Electronics | 126 |
|
RFQ | ||
|
|
Bristol Electronics | 8 |
|
RFQ | ||
|
|
Quest Components | IC,OP-AMP,QUAD,BIPOLAR/JFET,SOP,14PIN,PLASTIC | 2 |
|
$0.8385 | Buy Now |
|
DISTI #
TL074ID-TI
|
TME | IC: operational amplifier, 3MHz, Ch: 4, SO14, tube Min Qty: 1 | 50 |
|
$0.5880 / $0.8900 | Buy Now |
|
|
Ameya Holding Limited | TL074 Series 18 V 3 MHz Low Noise JFET Quad Operational Amplifier - SOIC-14 | 23 |
|
Buy Now RFQ | |
|
|
Vyrian | Amplifiers | 2933 |
|
RFQ | |
|
|
Win Source Electronics | IC OPAMP JFET 3MHZ 14SOIC | 553000 |
|
$0.0773 / $0.0997 | Buy Now |
Part Details for TL074ID
TL074ID CAD Models
TL074ID Part Data Attributes
|
|
TL074ID
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
TL074ID
Texas Instruments
Quad, 30-V, 3-MHz, high slew rate (13-V/µs), In to V+, JFET-input op amp 14-SOIC -40 to 85
|
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | TEXAS INSTRUMENTS INC | |
| Part Package Code | SOIC | |
| Pin Count | 14 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Samacsys Manufacturer | Texas Instruments | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | VOLTAGE-FEEDBACK | |
| Average Bias Current-Max (IIB) | 0.02 µA | |
| Bias Current-Max (IIB) @25C | 0.0002 µA | |
| Common-mode Reject Ratio-Min | 75 dB | |
| Common-mode Reject Ratio-Nom | 100 dB | |
| Frequency Compensation | YES | |
| Input Offset Current-Max (IIO) | 0.002 µA | |
| Input Offset Voltage-Max | 6000 µV | |
| JESD-30 Code | R-PDSO-G14 | |
| JESD-609 Code | e4 | |
| Length | 8.65 mm | |
| Low-Bias | YES | |
| Low-Offset | NO | |
| Micropower | NO | |
| Moisture Sensitivity Level | 1 | |
| Neg Supply Voltage Limit-Max | -18 V | |
| Neg Supply Voltage-Nom (Vsup) | -15 V | |
| Number of Functions | 4 | |
| Number of Terminals | 14 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP14,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Packing Method | TUBE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Power | NO | |
| Programmable Power | NO | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.75 mm | |
| Slew Rate-Min | 8 V/us | |
| Slew Rate-Nom | 13 V/us | |
| Supply Current-Max | 10 mA | |
| Supply Voltage Limit-Max | 18 V | |
| Supply Voltage-Nom (Vsup) | 15 V | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Unity Gain BW-Nom | 3000 | |
| Voltage Gain-Min | 25000 | |
| Wideband | NO | |
| Width | 3.9 mm |
Alternate Parts for TL074ID
This table gives cross-reference parts and alternative options found for TL074ID. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of TL074ID, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| TL074IDRG4 | Texas Instruments | Check for Price | Quad, 30-V, 3-MHz, high slew rate (13-V/µs), In to V+, JFET-input op amp 14-SOIC -40 to 85 | TL074ID vs TL074IDRG4 |
| TL074IDG4 | Texas Instruments | $0.4099 | Quad, 30-V, 3-MHz, high slew rate (13-V/µs), In to V+, JFET-input op amp 14-SOIC -40 to 85 | TL074ID vs TL074IDG4 |
| TL074IDT | STMicroelectronics | $0.3098 | JFET inputs, low input bias current | TL074ID vs TL074IDT |
| TL074IDE4 | Texas Instruments | Check for Price | Quad, 30-V, 3-MHz, high slew rate (13-V/µs), In to V+, JFET-input op amp 14-SOIC -40 to 85 | TL074ID vs TL074IDE4 |
| TL074IDR | Texas Instruments | $0.2334 | Quad, 30-V, 3-MHz, high slew rate (13-V/µs), In to V+, JFET-input op amp 14-SOIC -40 to 85 | TL074ID vs TL074IDR |
| TL074CDT | STMicroelectronics | $0.2337 | JFET inputs, low input bias current | TL074ID vs TL074CDT |
TL074ID Frequently Asked Questions (FAQ)
-
The maximum power supply voltage for the TL074ID is ±18V, or 36V total.
-
Yes, the TL074ID can be used in single-supply applications, but the input common-mode voltage range is limited to VCC-2V to VCC+2V.
-
The input impedance of the TL074ID is typically around 2MΩ, but it can vary depending on the specific application and operating conditions.
-
While the TL074ID can be used as a comparator, it's not the best choice due to its relatively slow slew rate and limited bandwidth. A dedicated comparator IC would be a better choice.
-
To minimize noise and interference, keep the TL074ID away from high-current or high-frequency components, use a solid ground plane, and keep signal traces short and direct.