Part Details for TL072CP by Motorola Mobility LLC
Results Overview of TL072CP by Motorola Mobility LLC
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (4 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Industrial Automation
Electronic Manufacturing
TL072CP Information
TL072CP by Motorola Mobility LLC is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Part Details for TL072CP
TL072CP CAD Models
TL072CP Part Data Attributes
|
|
TL072CP
Motorola Mobility LLC
Buy Now
Datasheet
|
Compare Parts:
TL072CP
Motorola Mobility LLC
DUAL OP-AMP, 13000uV OFFSET-MAX, 4MHz BAND WIDTH, PDIP8, PLASTIC, DIP-8
|
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | MOTOROLA INC | |
| Part Package Code | DIP | |
| Package Description | DIP, | |
| Pin Count | 8 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Average Bias Current-Max (IIB) | 0.007 µA | |
| Common-mode Reject Ratio-Min | 70 dB | |
| Common-mode Reject Ratio-Nom | 100 dB | |
| Input Offset Voltage-Max | 13000 µV | |
| JESD-30 Code | R-PDIP-T8 | |
| JESD-609 Code | e0 | |
| Length | 9.78 mm | |
| Micropower | NO | |
| Neg Supply Voltage Limit-Max | -18 V | |
| Neg Supply Voltage-Nom (Vsup) | -15 V | |
| Number of Functions | 2 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | DIP | |
| Package Shape | RECTANGULAR | |
| Package Style | IN-LINE | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 4.45 mm | |
| Slew Rate-Min | 8 V/us | |
| Slew Rate-Nom | 13 V/us | |
| Supply Current-Max | 5 mA | |
| Supply Voltage Limit-Max | 18 V | |
| Supply Voltage-Nom (Vsup) | 15 V | |
| Surface Mount | NO | |
| Technology | BIPOLAR | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Pitch | 2.54 mm | |
| Terminal Position | DUAL | |
| Unity Gain BW-Nom | 4000 | |
| Voltage Gain-Min | 15000 | |
| Width | 7.62 mm |
Alternate Parts for TL072CP
This table gives cross-reference parts and alternative options found for TL072CP. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of TL072CP, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| TL072CP | Motorola Semiconductor Products | Check for Price | Operational Amplifier, 2 Func, 13000uV Offset-Max, BIPolar, PDIP8, PLASTIC, DIP-8 | TL072CP vs TL072CP |
TL072CP Frequently Asked Questions (FAQ)
-
The maximum power supply voltage that can be applied to the TL072CP is ±18V. Exceeding this voltage can cause damage to the device.
-
Yes, the TL072CP can be used in single-supply applications, but the input common-mode voltage range is limited to within 3V of the positive supply rail. Additionally, the output voltage swing will be reduced.
-
The TL072CP can source or sink up to 10mA of output current. Attempting to draw more current than this can cause the output voltage to droop or the device to overheat.
-
To ensure stability in a unity-gain buffer configuration, it's recommended to add a 10-100nF capacitor between the output and the inverting input to prevent oscillations.
-
Yes, the TL072CP is suitable for audio applications due to its low noise and distortion characteristics. However, it's not ideal for high-fidelity audio applications due to its limited bandwidth and slew rate.