Part Details for TL064ID by STMicroelectronics
Results Overview of TL064ID by STMicroelectronics
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
TL064ID Information
TL064ID by STMicroelectronics is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for TL064ID
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
89K1711
|
Newark | Ic, Op Amp, 1Mhz, 3.5V/ Us, Soic-8, No. Of Channels:4Channels, Gain Bandwidth Product:1Mhz, Supply Voltage Range:6V To 36V, Ic Case/Package:Soic, No. Of Pins:8Pins, Amplifier Type:Low Power, Rail To Rail:-, Input Offset Voltage:3Mvrohs Compliant: Yes |Stmicroelectronics TL064ID RoHS: Compliant Min Qty: 50 Package Multiple: 1 Date Code: 0 Container: Bulk | 0 |
|
Buy Now | |
|
|
ComSIT USA | LOW POWER JFET QUAD OPERATIONAL AMPLIFIER Operational Amplifier, 4 Func, 9000uV Offset-Max, BIPolar, PDSO14 ECCN: EAR99 RoHS: Compliant |
|
|
RFQ |
Part Details for TL064ID
TL064ID CAD Models
TL064ID Part Data Attributes
|
|
TL064ID
STMicroelectronics
Buy Now
Datasheet
|
Compare Parts:
TL064ID
STMicroelectronics
JFET inputs, low input bias current
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | STMICROELECTRONICS | |
| Part Package Code | SOIC | |
| Package Description | MICRO, PLASTIC, SO-14 | |
| Pin Count | 14 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Samacsys Manufacturer | STMicroelectronics | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | VOLTAGE-FEEDBACK | |
| Average Bias Current-Max (IIB) | 0.02 µA | |
| Bias Current-Max (IIB) @25C | 0.0002 µA | |
| Common-mode Reject Ratio-Min | 80 dB | |
| Common-mode Reject Ratio-Nom | 86 dB | |
| Frequency Compensation | YES | |
| Input Offset Voltage-Max | 9000 µV | |
| JESD-30 Code | R-PDSO-G14 | |
| JESD-609 Code | e4 | |
| Length | 8.65 mm | |
| Low-Bias | YES | |
| Low-Offset | NO | |
| Micropower | YES | |
| Moisture Sensitivity Level | 1 | |
| Neg Supply Voltage Limit-Max | -18 V | |
| Neg Supply Voltage-Nom (Vsup) | -15 V | |
| Number of Functions | 4 | |
| Number of Terminals | 14 | |
| Operating Temperature-Max | 105 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP14,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.75 mm | |
| Slew Rate-Min | 1.5 V/us | |
| Slew Rate-Nom | 3.5 V/us | |
| Supply Current-Max | 1 mA | |
| Supply Voltage Limit-Max | 18 V | |
| Supply Voltage-Nom (Vsup) | 15 V | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | NICKEL PALLADIUM GOLD | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 40 | |
| Unity Gain BW-Nom | 1000 | |
| Voltage Gain-Min | 4000 | |
| Width | 3.9 mm |
Alternate Parts for TL064ID
This table gives cross-reference parts and alternative options found for TL064ID. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of TL064ID, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| TL064IDT | STMicroelectronics | $0.3209 | Low input current (200pA), low power (200uA) 36V JFET Op-Amps, quad | TL064ID vs TL064IDT |
TL064ID Frequently Asked Questions (FAQ)
-
The maximum power dissipation of the TL064ID is dependent on the package type and ambient temperature. For the DIP14 package, the maximum power dissipation is 500mW at 25°C. For the SO14 package, it is 450mW at 25°C. It is essential to ensure that the device does not exceed these limits to prevent overheating and damage.
-
While the TL064ID is an op-amp, it can be used as a comparator in certain applications. However, it is not recommended as a dedicated comparator due to its limited slew rate and bandwidth. The TL064ID is better suited for amplifying small signals and providing high gain, rather than making precise comparisons.
-
To ensure stability when using the TL064ID in a feedback loop, it is essential to follow proper compensation techniques, such as adding a capacitor in parallel with the feedback resistor to reduce the gain at high frequencies. Additionally, the feedback loop should be designed to have a sufficient phase margin to prevent oscillations.
-
The input impedance of the TL064ID is typically around 2MΩ, but it can vary depending on the specific application and operating conditions. It is essential to consider the input impedance when designing the input stage of the circuit to ensure proper signal transfer and minimal signal loss.
-
The TL064ID is rated for operation up to 125°C, but its performance may degrade at higher temperatures. It is essential to consider the operating temperature range and ensure that the device is properly heat-sinked to prevent overheating and damage.