Part Details for TDA21211AUMA1 by Infineon Technologies AG
Results Overview of TDA21211AUMA1 by Infineon Technologies AG
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Audio and Video Systems
TDA21211AUMA1 Information
TDA21211AUMA1 by Infineon Technologies AG is a Peripheral Driver.
Peripheral Drivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Part Details for TDA21211AUMA1
TDA21211AUMA1 CAD Models
TDA21211AUMA1 Part Data Attributes
|
|
TDA21211AUMA1
Infineon Technologies AG
Buy Now
Datasheet
|
Compare Parts:
TDA21211AUMA1
Infineon Technologies AG
Half Bridge Based Peripheral Driver, PQCC40, 6 X 6 MM, 0.80 MM HEIGHT, GREEN, PLASTIC, IQFN-40
|
| Pbfree Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | INFINEON TECHNOLOGIES AG | |
| Part Package Code | QFN | |
| Package Description | HVQCCN, | |
| Pin Count | 40 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE | |
| Interface IC Type | HALF BRIDGE BASED PERIPHERAL DRIVER | |
| JESD-30 Code | S-PQCC-N40 | |
| Length | 6 mm | |
| Number of Functions | 1 | |
| Number of Terminals | 40 | |
| Output Current Flow Direction | SOURCE AND SINK | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | HVQCCN | |
| Package Shape | SQUARE | |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE | |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 0.8 mm | |
| Supply Voltage-Max | 5.5 V | |
| Supply Voltage-Min | 4.5 V | |
| Supply Voltage-Nom | 5 V | |
| Supply Voltage1-Max | 25 V | |
| Supply Voltage1-Min | 5 V | |
| Surface Mount | YES | |
| Terminal Form | NO LEAD | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | QUAD | |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED | |
| Width | 6 mm |
TDA21211AUMA1 Frequently Asked Questions (FAQ)
-
Infineon provides a recommended PCB layout in the application note AN2013-01, which includes guidelines for thermal vias, copper thickness, and component placement to ensure optimal thermal performance.
-
The selection of input and output capacitors depends on the specific application requirements. Infineon recommends using X7R or X5R ceramic capacitors with a voltage rating of at least 2x the maximum input voltage. The capacitance value should be chosen based on the desired frequency response and noise filtering requirements.
-
The maximum power dissipation of the TDA21211AUMA1 is dependent on the ambient temperature and the thermal resistance of the PCB. According to the datasheet, the maximum power dissipation is 2.5W at an ambient temperature of 25°C. However, this value can be derated based on the specific application conditions.
-
The TDA21211AUMA1 is specified to operate up to 150°C junction temperature. However, the device's performance and reliability may be affected at high temperatures. Infineon recommends consulting the datasheet and application notes for guidance on high-temperature operation.
-
To ensure EMC, Infineon recommends following the guidelines in the application note AN2013-01, which includes recommendations for PCB layout, component selection, and shielding. Additionally, the device should be used in conjunction with a suitable electromagnetic interference (EMI) filter.