Part Details for SX150A by Honeywell Sensing and Control
Results Overview of SX150A by Honeywell Sensing and Control
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Internet of Things (IoT)
Environmental Monitoring
Financial Technology (Fintech)
Smart Cities
Transportation and Logistics
Agriculture Technology
Telecommunications
Virtual Reality (VR), Augmented Reality (AR), and Vision Systems
Education and Research
Consumer Electronics
Security and Surveillance
Audio and Video Systems
Computing and Data Storage
Healthcare
Entertainment and Gaming
SX150A Information
SX150A by Honeywell Sensing and Control is a Pressure Sensor.
Pressure Sensors are under the broader part category of Sensors/Transducers.
Sensors and transducers detect and measure physical quantities like temperature, pressure, and force, converting them into electrical signals for various applications. Read more about Sensors/Transducers on our Sensors/Transducers part category page.
Part Details for SX150A
SX150A CAD Models
SX150A Part Data Attributes
|
|
SX150A
Honeywell Sensing and Control
Buy Now
Datasheet
|
Compare Parts:
SX150A
Honeywell Sensing and Control
Peizoresistive Sensor, Absolute, 0Psi Min, 150Psi Max, -20-110mV, Round, Through Hole Mount, BUTTON PACK, 4 PIN
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | HONEYWELL SENSING AND CONTROL | |
| Reach Compliance Code | unknown | |
| Body Breadth | 5.1 mm | |
| Body Height | 13.3 mm | |
| Linearity (%) | 0.5 % | |
| Mounting Feature | THROUGH HOLE MOUNT | |
| Offset-Nom | 20MV | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Range | -20-110mV | |
| Output Type | ANALOG VOLTAGE | |
| Package Shape/Style | ROUND | |
| Port Type | HOLE | |
| Pressure Range-Max | 150 Psi | |
| Pressure Range-Min | ||
| Pressure Sensing Mode | ABSOLUTE | |
| Response Time | 100 µs | |
| Sensors/Transducers Type | PRESSURE SENSOR,PIEZORESISTIVE | |
| Supply Voltage-Max | 5 V | |
| Surface Mount | NO | |
| Termination Type | SOLDER |
Alternate Parts for SX150A
This table gives cross-reference parts and alternative options found for SX150A. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of SX150A, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| SX15A | Honeywell Sensing and Control | Check for Price | Peizoresistive Sensor, Absolute, 0Psi Min, 15Psi Max, -20-110mV, Round, Through Hole Mount, BUTTON PACK, 4 PIN | SX150A vs SX15A |
SX150A Frequently Asked Questions (FAQ)
-
The recommended power-up sequence is to apply Vcc first, followed by Vref, and then the input signal. This ensures proper operation and prevents damage to the device.
-
The SX150A is factory-calibrated and does not require additional calibration. However, if you need to perform a system-level calibration, you can use the sensor's built-in calibration circuitry and follow the calibration procedure outlined in the datasheet.
-
The SX150A can measure pressures up to 150 psi (10.34 bar), but it's essential to note that the sensor's accuracy and linearity may degrade at the extremes of the pressure range.
-
The SX150A is rated for operation up to 125°C (257°F), but its accuracy and stability may be affected at high temperatures. It's recommended to derate the sensor's performance and consider using a heat sink or thermal management system in high-temperature applications.
-
To minimize EMI effects, use shielded cables, keep the sensor and associated wiring away from high-current carrying wires, and consider using EMI filters or shielding on the PCB. Additionally, ensure that the sensor's ground pin is connected to a low-impedance ground plane.