Part Details for STTS3000B2DN3F by STMicroelectronics
Results Overview of STTS3000B2DN3F by STMicroelectronics
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Internet of Things (IoT)
Environmental Monitoring
Industrial Automation
Financial Technology (Fintech)
Smart Cities
Transportation and Logistics
Agriculture Technology
Telecommunications
Virtual Reality (VR), Augmented Reality (AR), and Vision Systems
Automotive
Consumer Electronics
Education and Research
Security and Surveillance
Audio and Video Systems
Computing and Data Storage
Healthcare
Renewable Energy
Entertainment and Gaming
Robotics and Drones
STTS3000B2DN3F Information
STTS3000B2DN3F by STMicroelectronics is an Other Signal Circuit.
Other Signal Circuits are under the broader part category of Signal Circuits.
A signal is an electronic means of transmitting information, either as an analog signal with continuous values or a digital signal with discrete values. Signals are used in various systems and networks. Read more about Signal Circuits on our Signal Circuits part category page.
Price & Stock for STTS3000B2DN3F
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
497-11249-2-ND
|
DigiKey | IC MEMORY MOD TEMP SENSOR 8TDFN Min Qty: 3000 Lead time: 17 Weeks Container: Tape & Reel (TR) |
2161 In Stock |
|
$0.5519 | Buy Now |
|
DISTI #
STTS3000B2DN3F
|
Avnet Americas | - Tape and Reel (Alt: STTS3000B2DN3F) RoHS: Compliant Min Qty: 3000 Package Multiple: 3000 Lead time: 111 Weeks, 0 Days Container: Reel | 0 |
|
RFQ |
Part Details for STTS3000B2DN3F
STTS3000B2DN3F CAD Models
STTS3000B2DN3F Part Data Attributes
|
|
STTS3000B2DN3F
STMicroelectronics
Buy Now
Datasheet
|
Compare Parts:
STTS3000B2DN3F
STMicroelectronics
SPECIALTY ANALOG CIRCUIT
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | STMICROELECTRONICS | |
| Package Description | 3 X 2 MM, 0.80 MM HEIGHT, HALOGEN FREE AND ROHS COMPLIANT, MO-229WCED-3, TDFN-8 | |
| Reach Compliance Code | compliant | |
| HTS Code | 8542.39.00.01 | |
| Factory Lead Time | 111 Weeks | |
| Samacsys Manufacturer | STMicroelectronics |
Alternate Parts for STTS3000B2DN3F
This table gives cross-reference parts and alternative options found for STTS3000B2DN3F. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of STTS3000B2DN3F, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| TMP431CDGKR | Texas Instruments | $0.5592 | Remote and Local Temperature Sensor with Automatic Beta, N-Factor and Series-R Correction 8-VSSOP -40 to 125 | STTS3000B2DN3F vs TMP431CDGKR |
STTS3000B2DN3F Frequently Asked Questions (FAQ)
-
STMicroelectronics recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A 4-layer PCB with a dedicated thermal layer is also recommended.
-
The STTS3000B2DN3F has a built-in calibration mechanism. Apply a known temperature to the sensor, then use the calibration registers to adjust the offset and gain values. Refer to the application note AN5096 for detailed calibration procedures.
-
The maximum cable length for the I2C interface is approximately 3 meters. Use a twisted pair cable with a maximum capacitance of 400 pF/m to minimize signal degradation and ensure reliable communication.
-
The thermal latency of the STTS3000B2DN3F is approximately 10 seconds. To minimize thermal latency, ensure good thermal coupling between the sensor and the target temperature source. Use thermal interface materials or thermal grease to improve heat transfer.
-
The STTS3000B2DN3F has a built-in POR and BOD circuitry. Ensure a stable power supply with a minimum voltage of 2.7 V and a maximum voltage of 5.5 V. The device will automatically reset and recover from power-on or brown-out conditions.