Part Details for SST25VF080B-80-4C-S2AE by Microchip Technology Inc
Results Overview of SST25VF080B-80-4C-S2AE by Microchip Technology Inc
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (2 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (2 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
SST25VF080B-80-4C-S2AE Information
SST25VF080B-80-4C-S2AE by Microchip Technology Inc is a Flash Memory.
Flash Memories are under the broader part category of Memory Components.
Memory components are essential in electronics for computer processing. They can be volatile or non-volatile, depending on the desired function. Read more about Memory Components on our Memory part category page.
Price & Stock for SST25VF080B-80-4C-S2AE
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
NAC | RoHS: Compliant Min Qty: 1 Package Multiple: 1 | 0 |
|
RFQ | |
|
|
Cytech Systems Limited | IC FLASH 8MBIT SPI 80MHZ 8SOIC | 1250 |
|
RFQ |
Part Details for SST25VF080B-80-4C-S2AE
SST25VF080B-80-4C-S2AE CAD Models
SST25VF080B-80-4C-S2AE Part Data Attributes
|
|
SST25VF080B-80-4C-S2AE
Microchip Technology Inc
Buy Now
Datasheet
|
Compare Parts:
SST25VF080B-80-4C-S2AE
Microchip Technology Inc
1M X 8 FLASH 2.7V PROM, PDSO8, 0.200 INCH, ROHS COMPLIANT, SOIC-8
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | MICROCHIP TECHNOLOGY INC | |
| Part Package Code | SOIC | |
| Package Description | 0.200 INCH, ROHS COMPLIANT, SOIC-8 | |
| Pin Count | 8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | 3A991.B.1.A | |
| HTS Code | 8542.32.00.51 | |
| Samacsys Manufacturer | Microchip | |
| Clock Frequency-Max (fCLK) | 80 MHz | |
| Data Retention Time-Min | 100 | |
| Endurance | 100000 Write/Erase Cycles | |
| JESD-30 Code | S-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 5.275 mm | |
| Memory Density | 8388608 bit | |
| Memory IC Type | FLASH | |
| Memory Width | 8 | |
| Moisture Sensitivity Level | 3 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Number of Words | 1048576 words | |
| Number of Words Code | 1000000 | |
| Operating Mode | SYNCHRONOUS | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Organization | 1MX8 | |
| Output Characteristics | 3-STATE | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.3 | |
| Package Shape | SQUARE | |
| Package Style | SMALL OUTLINE | |
| Parallel/Serial | SERIAL | |
| Peak Reflow Temperature (Cel) | 260 | |
| Programming Voltage | 3 V | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 2.16 mm | |
| Serial Bus Type | SPI | |
| Standby Current-Max | 0.00002 A | |
| Supply Current-Max | 0.03 mA | |
| Supply Voltage-Max (Vsup) | 3.6 V | |
| Supply Voltage-Min (Vsup) | 2.7 V | |
| Supply Voltage-Nom (Vsup) | 3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Terminal Finish | Matte Tin (Sn) - annealed | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 40 | |
| Type | NOR TYPE | |
| Width | 5.275 mm | |
| Write Protection | HARDWARE/SOFTWARE |
Alternate Parts for SST25VF080B-80-4C-S2AE
This table gives cross-reference parts and alternative options found for SST25VF080B-80-4C-S2AE. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of SST25VF080B-80-4C-S2AE, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| SST25VF080B-80-4C-S2AE-T | Microchip Technology Inc | Check for Price | IC,SERIAL EEPROM,NOR FLASH,1MX8,CMOS,SOP,8PIN,PLASTIC | SST25VF080B-80-4C-S2AE vs SST25VF080B-80-4C-S2AE-T |
| SST25VF080B-80-4I-S2AE-T | Microchip Technology Inc | Check for Price | IC,SERIAL EEPROM,NOR FLASH,1MX8,CMOS,SOP,8PIN,PLASTIC | SST25VF080B-80-4C-S2AE vs SST25VF080B-80-4I-S2AE-T |
SST25VF080B-80-4C-S2AE Frequently Asked Questions (FAQ)
-
The SST25VF080B has a minimum of 100,000 erase cycles, but the actual number of cycles may vary depending on the usage and operating conditions.
-
The hold pin (HOLD#) is used to pause the serial flash memory operation. To use it, pull the HOLD# pin low to pause the operation, and pull it high to resume. Make sure to follow the timing specifications in the datasheet.
-
The recommended power-up sequence is to apply VCC first, followed by the clock signal (SCK), and then the chip select (CS#) and other signals. This ensures proper initialization of the device.
-
The WP# pin is used to enable or disable write protection. Tie the WP# pin to VCC to enable write protection, or tie it to GND to disable write protection. Make sure to follow the datasheet recommendations for write protection.
-
The maximum operating frequency for the SST25VF080B is 80 MHz, but it can be operated at lower frequencies depending on the application requirements.