Part Details for SST25VF016B-50-4C-S2AF by Silicon Storage Technology
Results Overview of SST25VF016B-50-4C-S2AF by Silicon Storage Technology
- Distributor Offerings: (4 listings)
- Number of FFF Equivalents: (4 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
SST25VF016B-50-4C-S2AF Information
SST25VF016B-50-4C-S2AF by Silicon Storage Technology is a Flash Memory.
Flash Memories are under the broader part category of Memory Components.
Memory components are essential in electronics for computer processing. They can be volatile or non-volatile, depending on the desired function. Read more about Memory Components on our Memory part category page.
Price & Stock for SST25VF016B-50-4C-S2AF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 31 |
|
RFQ | ||
|
|
Quest Components | IC,SERIAL EEPROM,NOR FLASH,2MX8,CMOS,SOP,8PIN,PLASTIC | 171 |
|
$2.2755 / $3.6900 | Buy Now |
|
|
Quest Components | IC,SERIAL EEPROM,NOR FLASH,2MX8,CMOS,SOP,8PIN,PLASTIC | 75 |
|
$1.8450 / $3.6900 | Buy Now |
|
|
Quest Components | IC,SERIAL EEPROM,NOR FLASH,2MX8,CMOS,SOP,8PIN,PLASTIC | 52 |
|
$2.4600 / $3.6900 | Buy Now |
Part Details for SST25VF016B-50-4C-S2AF
SST25VF016B-50-4C-S2AF CAD Models
SST25VF016B-50-4C-S2AF Part Data Attributes
|
|
SST25VF016B-50-4C-S2AF
Silicon Storage Technology
Buy Now
Datasheet
|
Compare Parts:
SST25VF016B-50-4C-S2AF
Silicon Storage Technology
Flash, 16X1, PDSO8, 5.20 X 8 MM, ROHS COMPLIANT, EIAJ, SOIC-8
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | SILICON STORAGE TECHNOLOGY INC | |
| Part Package Code | SOIC | |
| Package Description | SOIC-8 | |
| Pin Count | 8 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.32.00.51 | |
| Clock Frequency-Max (fCLK) | 50 MHz | |
| Data Retention Time-Min | 100 | |
| Endurance | 100000 Write/Erase Cycles | |
| JESD-30 Code | S-PDSO-G8 | |
| JESD-609 Code | e4 | |
| Length | 5.275 mm | |
| Memory Density | 16777216 bit | |
| Memory IC Type | FLASH | |
| Memory Width | 8 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Number of Words | 2097152 words | |
| Number of Words Code | 2000000 | |
| Operating Mode | SYNCHRONOUS | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Organization | 2MX8 | |
| Output Characteristics | 3-STATE | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.3 | |
| Package Shape | SQUARE | |
| Package Style | SMALL OUTLINE | |
| Parallel/Serial | SERIAL | |
| Programming Voltage | 3.3 V | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 2.16 mm | |
| Serial Bus Type | SPI | |
| Standby Current-Max | 0.00002 A | |
| Supply Current-Max | 0.02 mA | |
| Supply Voltage-Max (Vsup) | 3.6 V | |
| Supply Voltage-Min (Vsup) | 2.7 V | |
| Supply Voltage-Nom (Vsup) | 3.3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | NICKEL PALLADIUM GOLD | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Type | NOR TYPE | |
| Width | 5.275 mm | |
| Write Protection | HARDWARE/SOFTWARE |
Alternate Parts for SST25VF016B-50-4C-S2AF
This table gives cross-reference parts and alternative options found for SST25VF016B-50-4C-S2AF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of SST25VF016B-50-4C-S2AF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| SST25VF016B-50-4C-S2AF | Microchip Technology Inc | $2.0097 | 16M X 1 FLASH 2.7V PROM, PDSO8, 5.20 X 8 MM, ROHS COMPLIANT, EIAJ, SOIC-8 | SST25VF016B-50-4C-S2AF vs SST25VF016B-50-4C-S2AF |
| SST25VF016B-50-4I-S2AF-T | Microchip Technology Inc | $2.0105 | IC,SERIAL EEPROM,NOR FLASH,2MX8,CMOS,SOP,8PIN,PLASTIC | SST25VF016B-50-4C-S2AF vs SST25VF016B-50-4I-S2AF-T |
| SST25VF016B-50-4C-S2AF-T | Microchip Technology Inc | $2.1655 | IC,SERIAL EEPROM,NOR FLASH,2MX8,CMOS,SOP,8PIN,PLASTIC | SST25VF016B-50-4C-S2AF vs SST25VF016B-50-4C-S2AF-T |
| SST25VF016B-50-4I-S2AE | Microchip Technology Inc | Check for Price | FLASH 2.7V PROM | SST25VF016B-50-4C-S2AF vs SST25VF016B-50-4I-S2AE |
SST25VF016B-50-4C-S2AF Frequently Asked Questions (FAQ)
-
The SST25VF016B has a minimum of 100,000 erase cycles per sector, and a total of 1,000,000 erase cycles for the entire device.
-
The HOLD# pin should be driven high during active operations to prevent the device from entering the hold state. If the HOLD# pin is driven low, the device will enter the hold state, and all operations will be suspended.
-
The recommended power-up sequence is to apply VCC first, followed by the input signals (e.g., CE#, OE#, WE#, etc.). This ensures that the device is properly initialized and ready for operation.
-
The SST25VF016B has a density of 16 Mbits and is organized as 2,048 x 8-bit words. This information can be obtained by reading the device ID and configuration registers.
-
The WP# pin is the write-protect pin, which allows the user to protect the entire device or specific sectors from write operations. To use it, drive the WP# pin low to enable write protection, and drive it high to disable write protection.