Part Details for SR06X5100FTL by Walsin Technology Corporation
Results Overview of SR06X5100FTL by Walsin Technology Corporation
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
SR06X5100FTL Information
SR06X5100FTL by Walsin Technology Corporation is a Metal Film Resistor.
Metal Film Resistors are under the broader part category of Resistors.
Resistors are passive components that work by limiting electron flow in a circuit. They are available as fixed or as variable (potentionmeters). Read more about Resistors on our Resistors part category page.
Price & Stock for SR06X5100FTL
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
34AK2887
|
Newark | Res, 510R, 1%, 0.1W, 0603, Thick Film Rohs Compliant: Yes |WALSIN SR06X5100FTL RoHS: Compliant Min Qty: 10 Package Multiple: 1 Date Code: 1 Container: Cut Tape | 4170 |
|
$0.0050 / $0.0280 | Buy Now |
|
DISTI #
SR06X5100FTL
|
TME | Resistor: thick film, SMD, 0603, 510Ω, 100mW, ±1%, -55÷155°C Min Qty: 100 | 0 |
|
$0.0029 / $0.0098 | RFQ |
Part Details for SR06X5100FTL
SR06X5100FTL CAD Models
SR06X5100FTL Part Data Attributes
|
|
SR06X5100FTL
Walsin Technology Corporation
Buy Now
Datasheet
|
Compare Parts:
SR06X5100FTL
Walsin Technology Corporation
Fixed Resistor, Metal Film, 0.1W, 510ohm, 75V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0603, CHIP
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | WALSIN TECHNOLOGY CORP | |
| Package Description | CHIP | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8533.21.00.30 | |
| Additional Feature | ANTI-SULFUR, RATED AC VOLTAGE (V): 75 | |
| Construction | Rectangular | |
| JESD-609 Code | e3 | |
| Mounting Feature | SURFACE MOUNT | |
| Number of Terminals | 2 | |
| Operating Temperature-Max | 155 °C | |
| Operating Temperature-Min | -55 °C | |
| Package Height | 0.45 mm | |
| Package Length | 1.6 mm | |
| Package Style | SMT | |
| Package Width | 0.8 mm | |
| Packing Method | TR, Paper, 7 Inch | |
| Rated Power Dissipation (P) | 0.1 W | |
| Rated Temperature | 70 °C | |
| Reference Standard | AEC-Q200; MIL-STD-202 | |
| Resistance | 510 Ω | |
| Resistor Type | FIXED RESISTOR | |
| Size Code | 0603 | |
| Surface Mount | YES | |
| Technology | METAL GLAZE/THICK FILM | |
| Temperature Coefficient | 100 ppm/°C | |
| Terminal Finish | Tin (Sn) - with Nickel (Ni) barrier | |
| Terminal Shape | WRAPAROUND | |
| Tolerance | 1% | |
| Working Voltage | 75 V |
SR06X5100FTL Frequently Asked Questions (FAQ)
-
The recommended land pattern for the SR06X5100FTL is a rectangular pad with a size of 1.3mm x 0.8mm, with a solder mask opening of 0.8mm x 0.5mm. It's essential to follow the recommended land pattern to ensure proper soldering and to prevent thermal issues.
-
The SR06X5100FTL has a high power density, so thermal management is crucial. It's recommended to use a thermal pad or a heat sink with a thermal conductivity of at least 1 W/m-K. Ensure good thermal contact between the device and the heat sink, and keep the ambient temperature below 125°C.
-
The maximum allowed voltage derating for the SR06X5100FTL is 10%. This means that if the rated voltage is 50V, the maximum allowed voltage is 45V. Exceeding this derating may reduce the device's lifespan or cause it to fail prematurely.
-
The SR06X5100FTL is designed for low-frequency applications up to 100 kHz. While it may work in high-frequency applications, its performance and reliability may be compromised. It's recommended to consult with Walsin Technology Corporation or a qualified engineer to determine the device's suitability for high-frequency applications.
-
To ensure proper soldering, use a soldering iron with a temperature of 250°C to 270°C, and a solder with a melting point of 217°C to 221°C. Apply a small amount of solder paste to the pads, and use a reflow oven or a hot air gun to solder the device. Avoid overheating or applying excessive force, which can damage the device.