Part Details for SP310EET by Sipex Corporation
Results Overview of SP310EET by Sipex Corporation
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
SP310EET Information
SP310EET by Sipex Corporation is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for SP310EET
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 152 |
|
RFQ | ||
|
|
Quest Components | IC,LINE TRANSCEIVER,2 DRIVER,2 RCVR,SOP,18PIN,PLASTIC | 1250 |
|
$0.6900 / $1.5000 | Buy Now |
Part Details for SP310EET
SP310EET CAD Models
SP310EET Part Data Attributes
|
|
SP310EET
Sipex Corporation
Buy Now
Datasheet
|
Compare Parts:
SP310EET
Sipex Corporation
Line Transceiver, 2 Func, 2 Driver, 2 Rcvr, CMOS, PDSO18, SOIC-18
|
| Rohs Code | No | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | SIPEX CORP | |
| Package Description | SOIC-18 | |
| Reach Compliance Code | unknown | |
| Differential Output | NO | |
| Driver Number of Bits | 2 | |
| High Level Input Current-Max | 0.0002 A | |
| Input Characteristics | SCHMITT TRIGGER | |
| Interface IC Type | LINE TRANSCEIVER | |
| Interface Standard | EIA-232-D; V.28 | |
| JESD-30 Code | R-PDSO-G18 | |
| JESD-609 Code | e0 | |
| Length | 11.55 mm | |
| Moisture Sensitivity Level | 2 | |
| Number of Functions | 2 | |
| Number of Terminals | 18 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Out Swing-Min | 10 V | |
| Output Low Current-Max | 0.0032 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP18,.4 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 225 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 1000 ns | |
| Receiver Number of Bits | 2 | |
| Seated Height-Max | 2.65 mm | |
| Supply Current-Max | 5 mA | |
| Supply Voltage-Max | 5.5 V | |
| Supply Voltage-Min | 4.5 V | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Transmit Delay-Max | 3000 ns | |
| Width | 7.5 mm |
SP310EET Frequently Asked Questions (FAQ)
-
A good PCB layout for the SP310EET involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the device and the capacitors. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
-
To ensure reliable communication over the RS-232 interface, make sure to use a shielded cable, keep the cable length as short as possible, and use a baud rate that is within the recommended range of the device. Additionally, ensure that the transmitter and receiver are properly terminated and that the signal levels are within the recommended range.
-
The maximum cable length supported by the SP310EET is approximately 50 feet (15.24 meters) at a baud rate of 115.2 kbps. However, this can vary depending on the quality of the cable, the baud rate, and the environment in which the device is operating.
-
To handle ESD protection for the SP310EET, ensure that the device is handled and stored in an ESD-safe environment. Use ESD-safe packaging and handling materials, and ground yourself before handling the device. Additionally, consider using ESD protection devices such as TVS diodes or ESD protection arrays on the RS-232 lines.
-
The recommended power-up sequence for the SP310EET is to apply power to the VCC pin first, followed by the VDD pin. This ensures that the internal voltage regulators are properly initialized and that the device powers up correctly.