-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for SN75176BPE4 by Texas Instruments
Results Overview of SN75176BPE4 by Texas Instruments
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (9 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Energy and Power Systems
Entertainment and Gaming
Communication and Networking
SN75176BPE4 Information
SN75176BPE4 by Texas Instruments is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for SN75176BPE4
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
595-SN75176BPE4
|
Mouser Electronics | RS-422/RS-485 Interface IC Differential Bus Tra nsceiver ALT 595-SN75176BP RoHS: Compliant | 191 |
|
$0.6280 / $2.2800 | Buy Now |
|
|
Vyrian | Interface ICs | 1139 |
|
RFQ | |
|
|
Win Source Electronics | IC TRANSCEIVER HALF 1/1 8DIP / 1/1 Transceiver Half RS422, RS485 8-PDIP | 73310 |
|
$0.2622 / $0.3373 | Buy Now |
Part Details for SN75176BPE4
SN75176BPE4 CAD Models
SN75176BPE4 Part Data Attributes
|
|
SN75176BPE4
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
SN75176BPE4
Texas Instruments
Differential bus transceiver 8-PDIP 0 to 70
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | TEXAS INSTRUMENTS INC | |
| Part Package Code | DIP | |
| Package Description | ROHS COMPLIANT, PLASTIC, DIP-8 | |
| Pin Count | 8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Texas Instruments | |
| Additional Feature | 3-STATE DRIVER AND RECEIVER OUTPUTS | |
| Differential Output | YES | |
| Driver Number of Bits | 1 | |
| High Level Input Current-Max | 0.00002 A | |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER | |
| Interface IC Type | LINE TRANSCEIVER | |
| Interface Standard | EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11; X.27 | |
| JESD-30 Code | R-PDIP-T8 | |
| JESD-609 Code | e4 | |
| Length | 9.81 mm | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Out Swing-Min | 1.5 V | |
| Output Characteristics | 3-STATE | |
| Output Low Current-Max | 0.008 A | |
| Output Polarity | COMPLEMENTARY | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | DIP | |
| Package Equivalence Code | DIP8,.3 | |
| Package Shape | RECTANGULAR | |
| Package Style | IN-LINE | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 35 ns | |
| Receiver Number of Bits | 1 | |
| Seated Height-Max | 5.08 mm | |
| Supply Current-Max | 70 mA | |
| Supply Voltage-Max | 5.25 V | |
| Supply Voltage-Min | 4.75 V | |
| Supply Voltage-Nom | 5 V | |
| Supply Voltage1-Max | 5.25 V | |
| Supply Voltage1-Min | 4.75 V | |
| Supply Voltage1-Nom | 5 V | |
| Surface Mount | NO | |
| Technology | BIPOLAR | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Pitch | 2.54 mm | |
| Terminal Position | DUAL | |
| Transmit Delay-Max | 22 ns | |
| Width | 7.62 mm |
Alternate Parts for SN75176BPE4
This table gives cross-reference parts and alternative options found for SN75176BPE4. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of SN75176BPE4, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| SN75176BP | Texas Instruments | $0.9035 | Differential bus transceiver 8-PDIP 0 to 70 | SN75176BPE4 vs SN75176BP |
| SN65176BP | Texas Instruments | $0.9980 | Differential Bus Transceiver 8-PDIP -40 to 105 | SN75176BPE4 vs SN65176BP |
| DS3695N/NOPB | National Semiconductor Corporation | Check for Price | IC LINE TRANSCEIVER, PDIP8, Line Driver or Receiver | SN75176BPE4 vs DS3695N/NOPB |
| DS3695N | Texas Instruments | Check for Price | LINE TRANSCEIVER, PDIP8 | SN75176BPE4 vs DS3695N |
| SN95176BJG | Texas Instruments | Check for Price | Differential Bus Transreceiver 8-CDIP | SN75176BPE4 vs SN95176BJG |
| DS75176BTN/NOPB | Texas Instruments | Check for Price | Multipoint RS-485/RS-422 Transceivers 8-PDIP -40 to 85 | SN75176BPE4 vs DS75176BTN/NOPB |
| SNJ95176BJG | Texas Instruments | Check for Price | Differential Bus Transreceiver 8-CDIP -55 to 125 | SN75176BPE4 vs SNJ95176BJG |
| SN65HVD485EPE4 | Texas Instruments | Check for Price | Half-Duplex RS-485 Transceiver 8-PDIP -40 to 85 | SN75176BPE4 vs SN65HVD485EPE4 |
| DS3695TN/NOPB | National Semiconductor Corporation | Check for Price | IC LINE TRANSCEIVER, PDIP8, Line Driver or Receiver | SN75176BPE4 vs DS3695TN/NOPB |
SN75176BPE4 Frequently Asked Questions (FAQ)
-
The maximum cable length supported by the SN75176BPE4 is dependent on the specific application and the type of cable used. However, as a general guideline, the device can support cable lengths up to 100 meters (328 feet) at a data rate of 100 Mbps.
-
To ensure EMC with the SN75176BPE4, follow proper PCB layout and design guidelines, use shielding and grounding techniques, and consider using common-mode chokes or ferrite beads to reduce electromagnetic interference (EMI).
-
The recommended operating temperature range for the SN75176BPE4 is -40°C to 85°C. However, the device can operate at temperatures up to 100°C for short periods of time, but this may affect its reliability and lifespan.
-
Yes, the SN75176BPE4 can be used in redundant or fault-tolerant systems. The device has built-in features such as automatic polarity detection and correction, which can help ensure reliable operation in redundant systems.
-
To troubleshoot issues with the SN75176BPE4, start by checking the power supply voltage, signal integrity, and cable connections. Use oscilloscopes or logic analyzers to monitor signal waveforms and identify potential issues. Consult the datasheet and application notes for guidance on troubleshooting specific problems.