-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for SN74HC595DT by Texas Instruments
Results Overview of SN74HC595DT by Texas Instruments
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (7 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
SN74HC595DT Information
SN74HC595DT by Texas Instruments is a Shift Register.
Shift Registers are under the broader part category of Logic Components.
Digital logic governs the behavior of signals in electronic circuits, enabling complex decisions based on simple binary inputs (yes/no). Logic components perform operations from these signals. Read more about Logic Components on our Logic part category page.
Price & Stock for SN74HC595DT
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Ameya Holding Limited | SN74HC595DT, 8-Bit 移位寄存器, 串行至串行/并行, 单向, 2 → 6 V电源, 16针 SOIC封装 | 3000 |
|
Buy Now RFQ | |
|
|
Vyrian | Logic ICs | 627 |
|
RFQ |
Part Details for SN74HC595DT
SN74HC595DT CAD Models
SN74HC595DT Part Data Attributes
|
|
SN74HC595DT
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
SN74HC595DT
Texas Instruments
8-bit shift registers with 3-state output registers 16-SOIC -40 to 85
|
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | TEXAS INSTRUMENTS INC | |
| Part Package Code | SOIC | |
| Pin Count | 16 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Texas Instruments | |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT | |
| Count Direction | RIGHT | |
| Family | HC/UH | |
| JESD-30 Code | R-PDSO-G16 | |
| JESD-609 Code | e4 | |
| Length | 9.9 mm | |
| Load Capacitance (CL) | 150 pF | |
| Logic IC Type | SERIAL IN PARALLEL OUT | |
| Max Frequency@Nom-Sup | 25000000 Hz | |
| Max I(ol) | 0.0078 A | |
| Moisture Sensitivity Level | 1 | |
| Number of Bits | 8 | |
| Number of Functions | 1 | |
| Number of Terminals | 16 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Characteristics | 3-STATE | |
| Output Polarity | TRUE | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP16,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Packing Method | TR | |
| Peak Reflow Temperature (Cel) | 260 | |
| Power Supply Current-Max (ICC) | 0.08 mA | |
| Prop. Delay@Nom-Sup | 34 ns | |
| Propagation Delay (tpd) | 200 ns | |
| Qualification Status | Not Qualified | |
| Schmitt Trigger | NO | |
| Seated Height-Max | 1.75 mm | |
| Supply Voltage-Max (Vsup) | 6 V | |
| Supply Voltage-Min (Vsup) | 2 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED | |
| Trigger Type | POSITIVE EDGE | |
| Width | 3.9 mm | |
| fmax-Min | 24 MHz |
Alternate Parts for SN74HC595DT
This table gives cross-reference parts and alternative options found for SN74HC595DT. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of SN74HC595DT, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| SN74HC595DTE4 | Texas Instruments | Check for Price | 8-Bit Shift Registers With 3-State Output Registers 16-SOIC -40 to 85 | SN74HC595DT vs SN74HC595DTE4 |
| MC74HC595AD | Motorola Semiconductor Products | Check for Price | Serial In Parallel Out, HC/UH Series, 8-Bit, Right Direction, True Output, CMOS, PDSO16, PLASTIC, SOIC-16 | SN74HC595DT vs MC74HC595AD |
| SN74HC595DR | Texas Instruments | $0.1362 | 8-bit shift registers with 3-state output registers 16-SOIC -40 to 85 | SN74HC595DT vs SN74HC595DR |
| HD74HC595RP-EL | Renesas Electronics Corporation | Check for Price | HC/UH SERIES, SERIAL IN PARALLEL OUT SHIFT REGISTER, PDSO16, FP-16DN | SN74HC595DT vs HD74HC595RP-EL |
| TC74HC595AFS | Toshiba America Electronic Components | Check for Price | IC HC/UH SERIES, 8-BIT RIGHT SERIAL IN PARALLEL OUT SHIFT REGISTER, TRUE OUTPUT, PDSO16, Shift Register | SN74HC595DT vs TC74HC595AFS |
| MC74HC595ADR2 | Motorola Mobility LLC | Check for Price | HC/UH SERIES, 8-BIT RIGHT SERIAL IN PARALLEL OUT SHIFT REGISTER, TRUE OUTPUT, PDSO16, 0.150 INCH, PLASTIC, SOIC-16 | SN74HC595DT vs MC74HC595ADR2 |
| SN74HC595DR-00 | Texas Instruments | Check for Price | HC/UH SERIES, 8-BIT RIGHT SERIAL IN PARALLEL OUT SHIFT REGISTER, TRUE OUTPUT, PDSO16 | SN74HC595DT vs SN74HC595DR-00 |
SN74HC595DT Frequently Asked Questions (FAQ)
-
The maximum clock frequency for the SN74HC595DT is 25 MHz.
-
Yes, the SN74HC595DT is compatible with 5V microcontrollers, but it can also operate at 3.3V or other voltage levels with proper voltage translation.
-
To ensure that the output pins are in a high-impedance state during power-up, connect the OE (output enable) pin to VCC through a pull-up resistor. This will keep the outputs in a high-impedance state until the OE pin is actively driven low.
-
The MR (master reset) pin is used to asynchronously reset the shift register, clearing all output bits to a logic low state. This pin can be used to initialize the shift register or to recover from an error condition.
-
Yes, the SN74HC595DT can be used to drive LEDs or other inductive loads, but it's recommended to use a current-limiting resistor in series with the load to prevent excessive current draw and potential damage to the device.