-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for SN74HC165DRG3 by Texas Instruments
Results Overview of SN74HC165DRG3 by Texas Instruments
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (6 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
SN74HC165DRG3 Information
SN74HC165DRG3 by Texas Instruments is a Shift Register.
Shift Registers are under the broader part category of Logic Components.
Digital logic governs the behavior of signals in electronic circuits, enabling complex decisions based on simple binary inputs (yes/no). Logic components perform operations from these signals. Read more about Logic Components on our Logic part category page.
Price & Stock for SN74HC165DRG3
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
296-SN74HC165DRG3CT-ND
|
DigiKey | IC SHIFT REGISTER 8BIT 16SOIC Min Qty: 1 Lead time: 6 Weeks Container: Cut Tape (CT), Digi-Reel®, Tape & Reel (TR) |
12450 In Stock |
|
$0.2182 / $0.5300 | Buy Now |
|
DISTI #
595-SN74HC165DRG3
|
Mouser Electronics | Counter Shift Registers 8B Parallel-Load Shi ft Registers RoHS: Compliant | 29477 |
|
$0.2110 / $0.5300 | Buy Now |
|
|
Vyrian | Logic ICs | 25622 |
|
RFQ |
Part Details for SN74HC165DRG3
SN74HC165DRG3 CAD Models
SN74HC165DRG3 Part Data Attributes
|
|
SN74HC165DRG3
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
SN74HC165DRG3
Texas Instruments
8-Bit Parallel-Load Shift Registers 16-SOIC -40 to 125
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | TEXAS INSTRUMENTS INC | |
| Part Package Code | SOIC | |
| Pin Count | 16 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Texas Instruments | |
| Count Direction | RIGHT | |
| Family | HC/UH | |
| JESD-30 Code | R-PDSO-G16 | |
| JESD-609 Code | e3 | |
| Length | 9.9 mm | |
| Load Capacitance (CL) | 50 pF | |
| Logic IC Type | PARALLEL IN SERIAL OUT | |
| Max Frequency@Nom-Sup | 29000000 Hz | |
| Max I(ol) | 0.0052 A | |
| Moisture Sensitivity Level | 1 | |
| Number of Bits | 8 | |
| Number of Functions | 1 | |
| Number of Terminals | 16 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Polarity | COMPLEMENTARY | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP16,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Packing Method | TR | |
| Peak Reflow Temperature (Cel) | 260 | |
| Power Supply Current-Max (ICC) | 0.08 mA | |
| Prop. Delay@Nom-Sup | 38 ns | |
| Propagation Delay (tpd) | 225 ns | |
| Qualification Status | Not Qualified | |
| Schmitt Trigger | NO | |
| Seated Height-Max | 1.75 mm | |
| Supply Voltage-Max (Vsup) | 6 V | |
| Supply Voltage-Min (Vsup) | 2 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | AUTOMOTIVE | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Trigger Type | POSITIVE EDGE | |
| Width | 3.9 mm | |
| fmax-Min | 24 MHz |
Alternate Parts for SN74HC165DRG3
This table gives cross-reference parts and alternative options found for SN74HC165DRG3. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of SN74HC165DRG3, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MM74HC165M | Fairchild Semiconductor Corporation | Check for Price | Parallel In Serial Out, HC/UH Series, 8-Bit, Right Direction, Complementary Output, CMOS, PDSO16, 0.150 INCH, MS-012, SOIC-16 | SN74HC165DRG3 vs MM74HC165M |
| 74HC165D,652 | Nexperia | $0.1908 | 74HC165; 74HCT165 - 8-bit parallel-in/serial out shift register@en-us SOP 16-Pin | SN74HC165DRG3 vs 74HC165D,652 |
| SN74HC165D | Texas Instruments | $0.2240 | 8-Bit Parallel-Load Shift Registers 16-SOIC -40 to 125 | SN74HC165DRG3 vs SN74HC165D |
| 933713780652 | Nexperia | Check for Price | Parallel In Serial Out, HC/UH Series, 8-Bit, Right Direction, Complementary Output, CMOS, PDSO16 | SN74HC165DRG3 vs 933713780652 |
| MC74HC165ADR2 | Motorola Mobility LLC | Check for Price | HC/UH SERIES, 8-BIT RIGHT PARALLEL IN SERIAL OUT SHIFT REGISTER, COMPLEMENTARY OUTPUT, PDSO16, 0.150 INCH, PLASTIC, SOIC-16 | SN74HC165DRG3 vs MC74HC165ADR2 |
| MC74HC165AD | onsemi | Check for Price | HC/UH SERIES, 8-BIT RIGHT PARALLEL IN SERIAL OUT SHIFT REGISTER, COMPLEMENTARY OUTPUT, PDSO16, SOIC-16 | SN74HC165DRG3 vs MC74HC165AD |
SN74HC165DRG3 Frequently Asked Questions (FAQ)
-
The maximum clock frequency is typically 25 MHz, but it can vary depending on the specific application and operating conditions. It's recommended to check the datasheet and application notes for more information.
-
To ensure proper data shifting, make sure to clock the shift register on the rising edge of the clock signal, and use the parallel load input (PL) to load the data into the shift register. Also, ensure that the clock signal is clean and free of noise.
-
The parallel load (PL) input is used to load the data into the shift register in parallel. When PL is low, the data is loaded into the shift register, and when PL is high, the shift register operates in serial mode.
-
Yes, the SN74HC165DRG3 can be used as a serial-to-parallel converter. The shift register can be loaded with serial data, and then the parallel output can be used to drive external devices.
-
The asynchronous clear (CLR) input is used to clear the shift register. When CLR is low, the shift register is cleared, and all outputs are set to low. Make sure to use a pull-up resistor on the CLR input to prevent accidental clearing of the shift register.