-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for SMF5.0AT1G by onsemi
Results Overview of SMF5.0AT1G by onsemi
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (6 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
SMF5.0AT1G Information
SMF5.0AT1G by onsemi is a Transient Suppressor.
Transient Suppressors are under the broader part category of Diodes.
A diode is a electrical part that can control the direction in which the current flows in a device. Consider factors like voltage drop, current capacity, reverse voltage, and operating frequency when selecting a diode. Read more about Diodes on our Diodes part category page.
Price & Stock for SMF5.0AT1G
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 1264 |
|
RFQ | ||
|
|
Bristol Electronics | 175 |
|
RFQ | ||
|
|
Vyrian | Diodes | 1124 |
|
RFQ |
Part Details for SMF5.0AT1G
SMF5.0AT1G CAD Models
SMF5.0AT1G Part Data Attributes
|
|
SMF5.0AT1G
onsemi
Buy Now
Datasheet
|
Compare Parts:
SMF5.0AT1G
onsemi
Transient Voltage Suppressors, 200 Watt, 5.0 V, Unidirectional, SOD-123FL 2 LEAD, 3000-REEL
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | ONSEMI | |
| Part Package Code | SOD | |
| Package Description | ROHS COMPLIANT, PLASTIC, CASE 498, 2 PIN | |
| Pin Count | 2 | |
| Manufacturer Package Code | 498-01 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8541.10.00.50 | |
| Samacsys Manufacturer | onsemi | |
| Additional Feature | EXCELLENT CLAMPING CAPABILITY, LOW ZENER IMPEDANCE | |
| Breakdown Voltage-Max | 11.1 V | |
| Breakdown Voltage-Min | 10 V | |
| Breakdown Voltage-Nom | 6.7 V | |
| Clamping Voltage-Max | 9.2 V | |
| Configuration | SINGLE | |
| Diode Element Material | SILICON | |
| Diode Type | TRANS VOLTAGE SUPPRESSOR DIODE | |
| JESD-30 Code | R-PDSO-F2 | |
| JESD-609 Code | e3 | |
| Moisture Sensitivity Level | 1 | |
| Non-rep Peak Rev Power Dis-Max | 1000 W | |
| Number of Elements | 1 | |
| Number of Terminals | 2 | |
| Operating Temperature-Max | 150 °C | |
| Operating Temperature-Min | -55 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Polarity | UNIDIRECTIONAL | |
| Power Dissipation-Max | 0.385 W | |
| Qualification Status | Not Qualified | |
| Rep Pk Reverse Voltage-Max | 9 V | |
| Surface Mount | YES | |
| Technology | ZENER | |
| Terminal Finish | TIN | |
| Terminal Form | FLAT | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 |
Alternate Parts for SMF5.0AT1G
This table gives cross-reference parts and alternative options found for SMF5.0AT1G. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of SMF5.0AT1G, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| SMF5.0 | Sangdest Microelectronics (Nanjing) Co Ltd | Check for Price | Trans Voltage Suppressor Diode, | SMF5.0AT1G vs SMF5.0 |
| SMF5.0A | Diotec Semiconductor AG | $0.0555 | Trans Voltage Suppressor Diode, 1000W, 5V V(RWM), Unidirectional, 1 Element, Silicon, SMF, 2 PIN | SMF5.0AT1G vs SMF5.0A |
| SMF5.0A | Vishay Intertechnologies | Check for Price | Trans Voltage Suppressor Diode, 1000W, 5V V(RWM), Unidirectional, 1 Element, Silicon, DO-219AB, PLASTIC, SMF, 2 PIN | SMF5.0AT1G vs SMF5.0A |
| SMF5.0A | EIC Semiconductor Inc | Check for Price | Transient Suppressor, | SMF5.0AT1G vs SMF5.0A |
| SMF5.0A-T1 | Won-Top Electronics Co Ltd | Check for Price | Trans Voltage Suppressor Diode, 1000W, 5V V(RWM), Unidirectional, 1 Element, Silicon, | SMF5.0AT1G vs SMF5.0A-T1 |
| SMF5.0A | Hitano Enterprise Corp | Check for Price | Trans Voltage Suppressor Diode, 200W, 5V V(RWM), Unidirectional, 1 Element, Silicon, | SMF5.0AT1G vs SMF5.0A |
SMF5.0AT1G Frequently Asked Questions (FAQ)
-
A good PCB layout for SMF5.0AT1G involves keeping the input and output traces separate, using a solid ground plane, and minimizing the length of the input and output traces. It's also recommended to use a 10nF capacitor between the VIN and GND pins to filter out noise.
-
To ensure the stability of the output voltage, it's essential to use a suitable output capacitor with a low ESR (Equivalent Series Resistance) and a high ripple current rating. A 10uF ceramic capacitor with an ESR of less than 100mΩ is recommended.
-
Although the datasheet specifies a maximum input voltage of 5.5V, it's recommended to limit the input voltage to 5V to ensure reliable operation and prevent damage to the device.
-
While SMF5.0AT1G is rated for operation up to 125°C, it's essential to consider the derating of the device's performance at high temperatures. The device's output current and voltage regulation may degrade at high temperatures, so it's crucial to evaluate the device's performance in the specific application environment.
-
To troubleshoot issues with SMF5.0AT1G, start by verifying the input voltage and current, and checking the output voltage and current. Use an oscilloscope to check for noise and ripple on the input and output lines. Also, ensure that the device is properly soldered and that the PCB layout is correct.