Part Details for SLG2016 by OSRAM GmbH
Results Overview of SLG2016 by OSRAM GmbH
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Industrial Automation
Energy and Power Systems
Transportation and Logistics
Renewable Energy
Automotive
SLG2016 Information
SLG2016 by OSRAM GmbH is an LED Display.
LED Displays are under the broader part category of Optoelectronics.
Optoelectronic components work to detect, generate, and control light. They can essentially produce and/or react to light. Read more about Optoelectronics on our Optoelectronics part category page.
Part Details for SLG2016
SLG2016 CAD Models
SLG2016 Part Data Attributes
|
|
SLG2016
OSRAM GmbH
Buy Now
Datasheet
|
Compare Parts:
SLG2016
OSRAM GmbH
5X7 DOT MATRIX DISPLAY, GREEN, 4.57mm, ROHS COMPLIANT PACKAGE-14
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | OSRAM OPTO SEMICONDUCTORS GMBH | |
| Package Description | ROHS COMPLIANT PACKAGE-14 | |
| Reach Compliance Code | compliant | |
| HTS Code | 8541.40.20.00 | |
| Additional Feature | TTL COMPATIBLE | |
| Color | GREEN | |
| Color@Wavelength | Green | |
| Configuration | COMPLEX | |
| Display Height | 4.57 mm | |
| JESD-609 Code | e3 | |
| Number of Characters | 4 | |
| Number of Functions | 4 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Optoelectronic Device Type | SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY | |
| Peak Wavelength | 565 nm | |
| Terminal Finish | Tin (Sn) |
Alternate Parts for SLG2016
This table gives cross-reference parts and alternative options found for SLG2016. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of SLG2016, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| SLG2016 | Infineon Technologies AG | Check for Price | LED Display, 4-Character, 4.7mm | SLG2016 vs SLG2016 |
SLG2016 Frequently Asked Questions (FAQ)
-
The recommended storage temperature for SLG2016 is -20°C to 30°C with a relative humidity of 60% or less.
-
While the SLG2016 is suitable for indoor use, it's not recommended for outdoor applications due to its limited environmental protection. If you need an outdoor solution, consider using a different product with higher environmental protection ratings.
-
The maximum soldering temperature for the SLG2016 is 260°C for a maximum of 10 seconds. Exceeding this temperature or time may damage the device.
-
To prevent ESD damage, handle the SLG2016 in an ESD-protected environment, wear an ESD wrist strap or use ESD-protective packaging. Avoid touching the device's pins or leads, and use an anti-static mat or surface when handling the device.
-
The recommended reflow soldering profile for the SLG2016 is a peak temperature of 240°C to 245°C, with a dwell time above 217°C of 30 seconds to 60 seconds. Refer to the OSRAM Opto Semiconductors application note for more detailed information.