Part Details for SH24D25 by Teledyne Technologies Inc
Results Overview of SH24D25 by Teledyne Technologies Inc
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
SH24D25 Information
SH24D25 by Teledyne Technologies Inc is a Solid State Relay.
Solid State Relays are under the broader part category of Optoelectronics.
Optoelectronic components work to detect, generate, and control light. They can essentially produce and/or react to light. Read more about Optoelectronics on our Optoelectronics part category page.
Price & Stock for SH24D25
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Onlinecomponents.com | Relay SSR 13mA 32V DC-IN 25A 275V AC-OUT 3-Pin |
246 In Stock |
|
$54.9700 / $56.9300 | Buy Now |
|
|
Master Electronics | Relay SSR 13mA 32V DC-IN 25A 275V AC-OUT 3-Pin |
246 In Stock |
|
$54.9700 / $56.9300 | Buy Now |
Part Details for SH24D25
SH24D25 CAD Models
SH24D25 Part Data Attributes
|
|
SH24D25
Teledyne Technologies Inc
Buy Now
Datasheet
|
Compare Parts:
SH24D25
Teledyne Technologies Inc
Trigger Output SSR, 1-Channel, 4000V Isolation,
|
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | TELEDYNE TECHNOLOGIES INC | |
| Reach Compliance Code | compliant | |
| HTS Code | 8541.40.95.00 | |
| Samacsys Manufacturer | Teledyne Technologies | |
| Additional Feature | UL RECOGNIZED, VDE APPROVED, ZERO VOLTAGE CROSSING | |
| Configuration | SINGLE WITH BUILT-IN DIODE AND LED DISPLAY | |
| Forward Current-Max | 0.013 A | |
| Isolation Voltage-Max | 4000 V | |
| Number of Elements | 1 | |
| On-State Current-Max | 25 A | |
| Operating Temperature-Max | 80 °C | |
| Operating Temperature-Min | -55 °C | |
| Optoelectronic Device Type | TRIGGER OUTPUT SSR |
SH24D25 Frequently Asked Questions (FAQ)
-
Teledyne recommends a 4-layer PCB with a solid ground plane, and thermal vias under the device to dissipate heat. A thermal pad on the bottom of the package should be connected to a heat sink or a thermal management system.
-
Teledyne suggests using a robust PCB design, securing the device with screws or adhesive, and using a conformal coating to protect against moisture and contaminants. Additionally, consider using a vibration-dampening material or a shock-absorbing mount.
-
Teledyne recommends a slow power-up sequence (typically 10-20 ms) to prevent voltage overshoot and ensure proper device initialization. For power-down, a slow sequence (10-20 ms) is also recommended to prevent damage from voltage transients.
-
Teledyne suggests using a logic analyzer or oscilloscope to monitor digital signals, and a multimeter to measure voltage and current. Check the device's datasheet and application notes for specific troubleshooting guidelines and FAQs.
-
Teledyne recommends storing the device in a dry, clean environment with a temperature range of -40°C to 125°C. Avoid exposing the device to moisture, direct sunlight, or extreme temperatures during storage or operation.