Part Details for SFE10.7MS3-A by Murata Manufacturing Co Ltd
Results Overview of SFE10.7MS3-A by Murata Manufacturing Co Ltd
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Aerospace and Defense
Agriculture Technology
Robotics and Drones
SFE10.7MS3-A Information
SFE10.7MS3-A by Murata Manufacturing Co Ltd is a Ceramic Filter.
Ceramic Filters are under the broader part category of Filters.
A filter is an electronic circuit that selectively allows certain frequencies to pass while attenuating others. They are used to extract desired signals and remove noise. Read more about Filters on our Filters part category page.
Price & Stock for SFE10.7MS3-A
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Chip 1 Exchange | INSTOCK | 336 |
|
RFQ |
Part Details for SFE10.7MS3-A
SFE10.7MS3-A CAD Models
SFE10.7MS3-A Part Data Attributes
|
|
SFE10.7MS3-A
Murata Manufacturing Co Ltd
Buy Now
Datasheet
|
Compare Parts:
SFE10.7MS3-A
Murata Manufacturing Co Ltd
Ceramic BPF, 10.7MHz
|
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | MURATA MANUFACTURING CO LTD | |
| Reach Compliance Code | unknown | |
| Attenuation Frequency (+/- delta f)-Max | 260 kHz | |
| Attenuation@Freq-Max | 20 dB | |
| Center or Cutoff Frequency (fo/fc) | 10.7 MHz | |
| Filter Type | CERAMIC BPF | |
| Height | 7 mm | |
| Input/Output Impedance | 330 OHM | |
| Insertion Loss-Max | 7 dB | |
| Length | 7 mm | |
| Mounting Type | THROUGH HOLE MOUNT | |
| Width | 3 mm |
SFE10.7MS3-A Frequently Asked Questions (FAQ)
-
Murata provides a recommended PCB layout and land pattern in their application notes and design guides. It's essential to follow these guidelines to ensure optimal performance, minimize parasitic inductance, and reduce electromagnetic interference (EMI).
-
The output capacitor selection depends on the output voltage, output current, and desired ripple voltage. A general rule of thumb is to choose a capacitor with a capacitance value between 10uF to 100uF, and a voltage rating at least 1.5 times the output voltage. Additionally, consider the capacitor's ESR (Equivalent Series Resistance) and ESL (Equivalent Series Inductance) to ensure it can handle the converter's switching frequency.
-
The maximum ambient temperature for the SFE10.7MS3-A is 85°C. As the ambient temperature increases, the converter's efficiency and output power may decrease. It's essential to consider the thermal derating and ensure proper heat dissipation to maintain reliable operation.
-
The SFE10.7MS3-A has built-in overcurrent protection, but it's recommended to add external protection circuits to ensure reliable operation. Implementing a fuse or a current-sensing resistor with a comparator can provide additional protection against overcurrent and short-circuit conditions.
-
A low-ESR ceramic capacitor or a film capacitor with a value between 10uF to 47uF is recommended for the input capacitor. The capacitor should be rated for the input voltage and have a low impedance at the converter's switching frequency.