Part Details for SD24D40-06 by Teledyne Technologies Inc
Results Overview of SD24D40-06 by Teledyne Technologies Inc
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
SD24D40-06 Information
SD24D40-06 by Teledyne Technologies Inc is a Solid State Relay.
Solid State Relays are under the broader part category of Optoelectronics.
Optoelectronic components work to detect, generate, and control light. They can essentially produce and/or react to light. Read more about Optoelectronics on our Optoelectronics part category page.
Price & Stock for SD24D40-06
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Onlinecomponents.com | Relay SSR 3mA 30V DC-IN 40A 280V AC-OUT 8-Pin |
36 In Stock |
|
$242.1100 / $249.4500 | Buy Now |
|
|
Master Electronics | Relay SSR 3mA 30V DC-IN 40A 280V AC-OUT 8-Pin |
36 In Stock |
|
$242.1100 / $249.4500 | Buy Now |
Part Details for SD24D40-06
SD24D40-06 CAD Models
SD24D40-06 Part Data Attributes
|
|
SD24D40-06
Teledyne Technologies Inc
Buy Now
Datasheet
|
Compare Parts:
SD24D40-06
Teledyne Technologies Inc
Transistor Output SSR, 2-Channel, 4000V Isolation,
|
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | TELEDYNE TECHNOLOGIES INC | |
| Reach Compliance Code | compliant | |
| HTS Code | 8541.40.95.00 | |
| Samacsys Manufacturer | Teledyne Technologies | |
| Additional Feature | UL RECOGNIZED, ZERO VOLTAGE CROSSING | |
| Configuration | SEPARATE, 2 ELEMENTS | |
| Isolation Voltage-Max | 4000 V | |
| Number of Elements | 2 | |
| On-State Current-Max | 40 A | |
| Operating Temperature-Max | 100 °C | |
| Operating Temperature-Min | -40 °C | |
| Optoelectronic Device Type | TRANSISTOR OUTPUT SSR |
SD24D40-06 Frequently Asked Questions (FAQ)
-
Teledyne recommends a 4-layer PCB with a dedicated ground plane, and thermal vias under the device to dissipate heat. A thermal pad on the bottom of the device should be connected to a heat sink or a thermal management system.
-
Teledyne recommends following the mounting and screw torque guidelines in the datasheet, and using a vibration-dampening material (e.g., silicone adhesive) between the device and the PCB. Additionally, ensure the PCB is securely fastened to the system's chassis.
-
Teledyne recommends using a low-pass filter with a cutoff frequency below 100 kHz to remove high-frequency noise, and a voltage regulator to ensure a stable input voltage. Additionally, use a signal buffer or amplifier if the input signal is weak or has high impedance.
-
Teledyne recommends using a logic analyzer or oscilloscope to monitor the device's output signals, and checking the input signal quality and power supply voltage. Consult the datasheet and application notes for troubleshooting guides and FAQs.
-
Teledyne recommends storing the devices in their original packaging, away from direct sunlight, moisture, and extreme temperatures. Handle the devices by the edges, avoiding touching the pins or sensitive areas, and use an anti-static wrist strap or mat when handling the devices.