Part Details for SC4213HSTRT by Semtech Corporation
Results Overview of SC4213HSTRT by Semtech Corporation
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Environmental Monitoring
Industrial Automation
Agriculture Technology
Medical Imaging
Electronic Manufacturing
SC4213HSTRT Information
SC4213HSTRT by Semtech Corporation is a Linear Regulator IC.
Linear Regulator ICs are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Part Details for SC4213HSTRT
SC4213HSTRT CAD Models
SC4213HSTRT Part Data Attributes
|
|
SC4213HSTRT
Semtech Corporation
Buy Now
Datasheet
|
Compare Parts:
SC4213HSTRT
Semtech Corporation
Fixed Positive LDO Regulator, 0.5V, 0.15V Dropout, CMOS, PDSO8, HALOGEN FREE AND ROHS COMPLIANT, MS-012AA, SOIC-8
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | SEMTECH CORP | |
| Part Package Code | SOIC | |
| Package Description | HALOGEN FREE AND ROHS COMPLIANT, MS-012AA, SOIC-8 | |
| Pin Count | 8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | SEMTECH | |
| Adjustability | ADJUSTABLE | |
| Dropout Voltage1-Max | 0.15 V | |
| Dropout Voltage1-Nom | 0.075 V | |
| Input Voltage-Max | 6 V | |
| Input Voltage-Min | 1.4 V | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 4.9 mm | |
| Line Regulation-Max (%/V) | 0.4 | |
| Load Regulation-Max(%) | 1.5% | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature TJ-Max | 125 °C | |
| Operating Temperature TJ-Min | -40 °C | |
| Output Current1-Max | 0.5 A | |
| Output Voltage1-Max | 0.515 V | |
| Output Voltage1-Min | 0.485 V | |
| Output Voltage1-Nom | 0.5 V | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Packing Method | TR | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Regulator Type | FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR | |
| Seated Height-Max | 1.75 mm | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Voltage Tolerance-Max | 3% | |
| Width | 3.9 mm |
SC4213HSTRT Frequently Asked Questions (FAQ)
-
A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the high-frequency traces short and away from the power plane. Use a via stitching pattern to connect the ground plane to the thermal pad.
-
Use a thermal interface material (TIM) with a thermal conductivity of at least 1 W/m-K between the device and the heat sink. Ensure good airflow and avoid thermal hotspots. Follow the recommended operating temperature range and derating guidelines.
-
The maximum allowable voltage on the VCC pin is 3.6V. Exceeding this voltage can cause permanent damage to the device. Use a voltage regulator or a voltage limiter to ensure the voltage stays within the recommended range.
-
Check the power supply voltage, ensure the EN pin is high, and verify the input voltage on the VIN pin. Also, check for any short circuits or open circuits on the PCB. Use a multimeter to measure the voltage on the VCC pin and the current drawn from the power supply.
-
A 10uF to 22uF X7R or X5R ceramic capacitor is recommended for the VIN pin. This helps to filter out noise and ensure stable operation. Avoid using electrolytic capacitors as they can cause voltage drops and affect the device's performance.