Part Details for SAB80C517A-N18-T3 by Infineon Technologies AG
Results Overview of SAB80C517A-N18-T3 by Infineon Technologies AG
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Industrial Automation
Renewable Energy
Robotics and Drones
SAB80C517A-N18-T3 Information
SAB80C517A-N18-T3 by Infineon Technologies AG is a Microcontroller.
Microcontrollers are under the broader part category of Microcontrollers and Processors.
Microcontrollers (MCUs) are small, low-power integrated circuits used to control embedded systems. Microcontrollers are primarily used to automate and control devices. Read more about Microcontrollers and Processors on our Microcontrollers and Processors part category page.
Part Details for SAB80C517A-N18-T3
SAB80C517A-N18-T3 CAD Models
SAB80C517A-N18-T3 Part Data Attributes
|
|
SAB80C517A-N18-T3
Infineon Technologies AG
Buy Now
Datasheet
|
Compare Parts:
SAB80C517A-N18-T3
Infineon Technologies AG
Microcontroller, 8-Bit, 8051 CPU, 18MHz, CMOS, PQCC84, PLASTIC, LCC-84
|
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | INFINEON TECHNOLOGIES AG | |
| Part Package Code | LCC | |
| Package Description | PLASTIC, LCC-84 | |
| Pin Count | 84 | |
| Reach Compliance Code | unknown | |
| HTS Code | 8542.31.00.01 | |
| Has ADC | YES | |
| Additional Feature | 2K X 8 ON-CHIP X-RAM; 16 X 16-BIT MULTIPLIER; 32 X 16-BIT DIVIDER | |
| Address Bus Width | 16 | |
| Bit Size | 8 | |
| CPU Family | 8051 | |
| Clock Frequency-Max | 18 MHz | |
| DAC Channels | NO | |
| DMA Channels | NO | |
| External Data Bus Width | 8 | |
| JESD-30 Code | S-PQCC-J84 | |
| JESD-609 Code | e0 | |
| Length | 29.4 mm | |
| Number of I/O Lines | 68 | |
| Number of Terminals | 84 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| PWM Channels | NO | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | QCCJ | |
| Package Equivalence Code | LDCC84,1.2SQ | |
| Package Shape | SQUARE | |
| Package Style | CHIP CARRIER | |
| Qualification Status | Not Qualified | |
| RAM (bytes) | 2304 | |
| Seated Height-Max | 4.58 mm | |
| Speed | 18 MHz | |
| Supply Current-Max | 37 mA | |
| Supply Voltage-Max | 5.5 V | |
| Supply Voltage-Min | 4.25 V | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | J BEND | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | QUAD | |
| Width | 29.4 mm | |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
Alternate Parts for SAB80C517A-N18-T3
This table gives cross-reference parts and alternative options found for SAB80C517A-N18-T3. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of SAB80C517A-N18-T3, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| SAB80C517A-N18 | Infineon Technologies AG | Check for Price | Microcontroller, 8-Bit, 8051 CPU, 18MHz, CMOS, PQCC84, PLASTIC, LCC-84 | SAB80C517A-N18-T3 vs SAB80C517A-N18 |
SAB80C517A-N18-T3 Frequently Asked Questions (FAQ)
-
Infineon provides a recommended PCB layout for the SAB80C517A-N18-T3 in their application note AN191 'Layout Recommendations for Infineon TrenchStop IGBTs'. It includes guidelines for thermal pad design, copper thickness, and via placement to minimize thermal resistance and ensure reliable operation.
-
The gate resistor value depends on the specific application requirements, such as switching frequency, voltage, and current. Infineon provides a gate resistor selection guide in their application note AN190 'Gate Resistor Selection for Infineon IGBTs'. It includes a calculation method and tables to help engineers choose the optimal gate resistor value.
-
The SAB80C517A-N18-T3 has a maximum allowed overcurrent of 2x the nominal current (IC) for a short duration (typically 10µs). To protect the device from overcurrent, engineers can use a combination of overcurrent detection circuits, such as shunt resistors and comparators, and implement a shutdown or fault detection mechanism to prevent damage to the device.
-
To ensure EMC in designs using the SAB80C517A-N18-T3, engineers should follow Infineon's guidelines for PCB layout, component selection, and shielding. They should also consider using EMI filters, common-mode chokes, and other EMC mitigation techniques to reduce electromagnetic interference and ensure compliance with relevant standards.
-
Infineon recommends storing the SAB80C517A-N18-T3 in a dry, cool place, away from direct sunlight and moisture. Engineers should handle the device by the body, avoiding touching the pins or leads, and use anti-static wrist straps or mats to prevent electrostatic discharge (ESD) damage.