Part Details for S1D13700F01A100 by Seiko Epson Corporation
Results Overview of S1D13700F01A100 by Seiko Epson Corporation
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Security and Surveillance
Electronic Manufacturing
Automotive
S1D13700F01A100 Information
S1D13700F01A100 by Seiko Epson Corporation is a Display Controller.
Display Controllers are under the broader part category of Microcontrollers and Processors.
Microcontrollers (MCUs) are small, low-power integrated circuits used to control embedded systems. Microcontrollers are primarily used to automate and control devices. Read more about Microcontrollers and Processors on our Microcontrollers and Processors part category page.
Price & Stock for S1D13700F01A100
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
S1D13700F01A100-ND
|
DigiKey | IC VIDEO GRAPHIC CNTL 64TQFP Min Qty: 1 Lead time: 26 Weeks Container: Tray | Temporarily Out of Stock |
|
Buy Now | |
|
DISTI #
732-S1D13700F01A100
|
Mouser Electronics | Display Drivers & Controllers LCD CONTROLLER | 0 |
|
Order Now |
Part Details for S1D13700F01A100
S1D13700F01A100 CAD Models
S1D13700F01A100 Part Data Attributes
|
|
S1D13700F01A100
Seiko Epson Corporation
Buy Now
Datasheet
|
Compare Parts:
S1D13700F01A100
Seiko Epson Corporation
Display Controller, PQFP64,
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | SEIKO EPSON CORP | |
| Package Description | TQFP-64 | |
| Reach Compliance Code | compliant | |
| ECCN Code | 3A001.A.3 | |
| HTS Code | 8542.31.00.01 | |
| Address Bus Width | 16 | |
| Bus Compatibility | Z-80; MC68K; M6800 | |
| Clock Frequency-Max | 60 MHz | |
| Display Configuration | 640 X 240 DOTS | |
| External Data Bus Width | 8 | |
| JESD-30 Code | S-PQFP-G64 | |
| Length | 10 mm | |
| Number of Terminals | 64 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TFQFP | |
| Package Equivalence Code | TQFP64,.47SQ | |
| Package Shape | SQUARE | |
| Package Style | FLATPACK, THIN PROFILE, FINE PITCH | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.2 mm | |
| Supply Voltage-Max | 3.6 V | |
| Supply Voltage-Min | 3 V | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | QUAD | |
| Width | 10 mm | |
| uPs/uCs/Peripheral ICs Type | DISPLAY CONTROLLER, CRT OR FLAT PANEL GRAPHICS DISPLAY |
S1D13700F01A100 Frequently Asked Questions (FAQ)
-
The recommended PCB layout for the S1D13700F01A100 is a 4-layer board with a solid ground plane, and power planes for VCC and VDD. Decoupling capacitors should be placed close to the chip.
-
Optimize display settings by adjusting the clock frequency, pixel clock, and horizontal/vertical sync timing to match the display panel's specifications. Also, ensure the display's power management is properly configured.
-
The maximum operating temperature range for the S1D13700F01A100 is -20°C to 70°C. However, it's recommended to operate within -10°C to 60°C for optimal performance and reliability.
-
To troubleshoot display issues, check the display's power supply, clock signals, and data transmission. Verify that the display's configuration matches the chip's settings. Use an oscilloscope to inspect the signal quality and timing.
-
The recommended power-up sequence is to apply VCC first, followed by VDD, and then the clock signal. Ensure that the power supplies are stable before applying the clock signal.