Part Details for PMEG2010EA by NXP Semiconductors
Results Overview of PMEG2010EA by NXP Semiconductors
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (2 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
PMEG2010EA Information
PMEG2010EA by NXP Semiconductors is a Rectifier Diode.
Rectifier Diodes are under the broader part category of Diodes.
A diode is a electrical part that can control the direction in which the current flows in a device. Consider factors like voltage drop, current capacity, reverse voltage, and operating frequency when selecting a diode. Read more about Diodes on our Diodes part category page.
Price & Stock for PMEG2010EA
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Win Source Electronics | Low VF (MEGA) Schottky barrier diode / Rectifier Diode Schottky 1A Automotive 2-Pin SOD-323 | 651000 |
|
$0.0346 / $0.0517 | Buy Now |
Part Details for PMEG2010EA
PMEG2010EA CAD Models
PMEG2010EA Part Data Attributes
|
|
PMEG2010EA
NXP Semiconductors
Buy Now
Datasheet
|
Compare Parts:
PMEG2010EA
NXP Semiconductors
1A, 20V, SILICON, SIGNAL DIODE, PLASTIC, SC-76, 2 PIN
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | NXP SEMICONDUCTORS | |
| Part Package Code | SC-76 | |
| Package Description | PLASTIC, SC-76, 2 PIN | |
| Pin Count | 2 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8541.10.00.80 | |
| Samacsys Manufacturer | NXP | |
| Configuration | SINGLE | |
| Diode Element Material | SILICON | |
| Diode Type | RECTIFIER DIODE | |
| Forward Voltage-Max (VF) | 0.27 V | |
| JESD-30 Code | R-PDSO-G2 | |
| JESD-609 Code | e3 | |
| Moisture Sensitivity Level | 1 | |
| Non-rep Pk Forward Current-Max | 5 A | |
| Number of Elements | 1 | |
| Number of Phases | 1 | |
| Number of Terminals | 2 | |
| Operating Temperature-Max | 125 °C | |
| Output Current-Max | 1 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Rep Pk Reverse Voltage-Max | 20 V | |
| Surface Mount | YES | |
| Technology | SCHOTTKY | |
| Terminal Finish | Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 |
Alternate Parts for PMEG2010EA
This table gives cross-reference parts and alternative options found for PMEG2010EA. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of PMEG2010EA, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| 934057100115 | NXP Semiconductors | Check for Price | 1A, 20V, SILICON, SIGNAL DIODE, PLASTIC, SMD, UMD2, URP, SC-76, 2 PIN | PMEG2010EA vs 934057100115 |
PMEG2010EA Frequently Asked Questions (FAQ)
-
NXP provides a recommended PCB layout in the application note AN11542, which includes guidelines for component placement, routing, and thermal management to ensure optimal performance and minimize electromagnetic interference (EMI).
-
The input capacitor value depends on the input voltage, output voltage, and output current. A general guideline is to use a capacitor with a value between 4.7 μF and 22 μF, with a voltage rating of at least 1.5 times the input voltage. Consult the application note AN11542 for more detailed guidance.
-
The PMEG2010EA is rated for operation up to 125°C ambient temperature, but it's recommended to derate the output current and voltage to ensure reliable operation above 85°C. Consult the datasheet and application note AN11542 for thermal management guidelines.
-
The PMEG2010EA has built-in OVP and UVP features, but they can be adjusted or customized using external resistors and capacitors. Consult the datasheet and application note AN11542 for implementation guidelines and examples.
-
The output capacitor value and type depend on the output voltage, output current, and desired ripple and noise performance. A general guideline is to use a low-ESR capacitor with a value between 10 μF and 47 μF, and a voltage rating of at least 1.5 times the output voltage. Consult the application note AN11542 for more detailed guidance.