Part Details for PHAP3368B by APEM Inc
Results Overview of PHAP3368B by APEM Inc
- Distributor Offerings: (5 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (5 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Energy and Power Systems
Transportation and Logistics
Renewable Energy
Automotive
PHAP3368B Information
PHAP3368B by APEM Inc is a Keypad Switch.
Keypad Switches are under the broader part category of Switches.
Electrical switches are binary devices that control the flow of current in a circuit by either allowing or preventing the flow of electrons. Read more about Switches on our Switches part category page.
Price & Stock for PHAP3368B
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
679-PHAP3368B-ND
|
DigiKey | TACT SWITCH PCB MOUNT Min Qty: 2000 Lead time: 12 Weeks Container: Bulk | Temporarily Out of Stock |
|
$0.7299 | Buy Now |
|
DISTI #
642-PHAP3368B
|
Mouser Electronics | Multi-Directional Switches TACT SWITCH PCB MOUNT | 0 |
|
$0.6820 | Order Now |
|
|
Onlinecomponents.com | RoHS: Compliant | 0 |
|
$0.6450 / $0.9400 | Buy Now |
|
|
Bristol Electronics | 80 |
|
RFQ | ||
|
|
Master Electronics | RoHS: Compliant | 0 |
|
$0.6450 / $0.9400 | Buy Now |
Part Details for PHAP3368B
PHAP3368B CAD Models
PHAP3368B Part Data Attributes
|
|
PHAP3368B
APEM Inc
Buy Now
Datasheet
|
Compare Parts:
PHAP3368B
APEM Inc
Keypad Switch, 1 Switches, SPST, Momentary-tactile, 0.05A, 12VDC, 2.1N, Solder Terminal, Surface Mount-straight
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | APEM COMPONENTS INC | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8536.50.90.40 | |
| Samacsys Manufacturer | Apem | |
| Actuator Type | ROUND TYPE | |
| Body Breadth | 6 mm | |
| Body Height | 3.5 mm | |
| Body Length or Diameter | 6 mm | |
| Circuit Configuration | 1X1 | |
| Contact Bounce Time-Max | 10 ms | |
| Contact Current(DC)-Max | 0.05 A | |
| Contact (DC) Max Rating R Load | .05A@12VDC | |
| Contact Resistance | 0.1 mΩ | |
| Contact Voltage(DC)-Max | 12 V | |
| Dielectric Withstand Volts | 250VAC V | |
| Electrical Life | 100000 Cycle(s) | |
| Insulation Resistance | 100000000 Ω | |
| Mounting Feature | SURFACE MOUNT-STRAIGHT | |
| Number of Switches | 1 | |
| Operating Force-Max | 2.1 N | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | -20 °C | |
| Packing Method | BAG; TAPE AND REEL | |
| Solderability | WAVE | |
| Surface Mount | NO | |
| Switch Action | MOMENTARY | |
| Switch Function | SPST | |
| Switch Type | KEYPAD SWITCH | |
| Termination Type | SOLDER |
Alternate Parts for PHAP3368B
This table gives cross-reference parts and alternative options found for PHAP3368B. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of PHAP3368B, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| 1301.9319 | Schurter Electronic Components | $0.0585 | Keypad Switch, 1 Switches, SPST, Momentary-tactile, 0.05A, 12VDC, 2.1N, 0 PCB Hole Cnt, Solder Terminal, Surface Mount-straight | PHAP3368B vs 1301.9319 |
| 1301.9318 | Schurter Electronic Components | $0.2220 | Keypad Switch, 1 Switches, SPST, Momentary-tactile, 0.05A, 12VDC, 2.1N, 0 PCB Hole Cnt, Solder Terminal, Surface Mount-straight | PHAP3368B vs 1301.9318 |
| PHAP3368F | APEM Inc | Check for Price | Keypad Switch, 1 Switches, SPST, Momentary-tactile, 0.05A, 12VDC, 2.1N, Solder Terminal, Surface Mount-straight | PHAP3368B vs PHAP3368F |
| PHAP3368A | APEM Inc | Check for Price | Keypad Switch, 1 Switches, SPST, Momentary-tactile, 0.05A, 12VDC, 2.1N, Solder Terminal, Surface Mount-straight | PHAP3368B vs PHAP3368A |
| PHAP3368D | APEM Inc | Check for Price | Keypad Switch, 1 Switches, SPST, Momentary-tactile, 0.05A, 12VDC, 2.1N, Solder Terminal, Surface Mount-straight | PHAP3368B vs PHAP3368D |
PHAP3368B Frequently Asked Questions (FAQ)
-
APEM recommends a torque of 0.5 Nm to 1.5 Nm for the screw terminals to ensure reliable connections.
-
Yes, the PHAP3368B is designed to withstand vibrations up to 10g (IEC 60068-2-6) and can be used in high-vibration environments with proper mounting and installation.
-
The PHAP3368B has a standard pinout and footprint, but it's essential to verify the PCB layout and ensure compatibility before installation. Consult APEM's application notes and PCB layout recommendations for guidance.
-
To ensure EMI/EMC compliance, follow APEM's guidelines for PCB layout, grounding, and shielding. Additionally, consider using EMI filters, shielding, and proper cable management to minimize electromagnetic interference.
-
APEM recommends storing the PHAP3368B in a dry, clean environment with a temperature range of -20°C to 40°C and relative humidity below 80% to prevent damage and ensure reliability.