Part Details for PHAP3305A by APEM Inc
Results Overview of PHAP3305A by APEM Inc
- Distributor Offerings: (4 listings)
- Number of FFF Equivalents: (4 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Energy and Power Systems
Transportation and Logistics
Renewable Energy
Automotive
PHAP3305A Information
PHAP3305A by APEM Inc is a Keypad Switch.
Keypad Switches are under the broader part category of Switches.
Electrical switches are binary devices that control the flow of current in a circuit by either allowing or preventing the flow of electrons. Read more about Switches on our Switches part category page.
Price & Stock for PHAP3305A
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
679-PHAP3305A-ND
|
DigiKey | TACT SWITCH PCB MOUNT Min Qty: 1000 Lead time: 12 Weeks Container: Bulk | Temporarily Out of Stock |
|
$0.3955 | Buy Now |
|
DISTI #
642-PHAP3305A
|
Mouser Electronics | Multi-Directional Switches TACT SWITCH PCB MOUNT | 0 |
|
$0.3090 / $0.4900 | Order Now |
|
|
Onlinecomponents.com | RoHS: Compliant | 0 |
|
$0.2749 / $0.4231 | Buy Now |
|
|
Master Electronics | RoHS: Compliant | 0 |
|
$0.2749 / $0.4231 | Buy Now |
Part Details for PHAP3305A
PHAP3305A CAD Models
PHAP3305A Part Data Attributes
|
|
PHAP3305A
APEM Inc
Buy Now
Datasheet
|
Compare Parts:
PHAP3305A
APEM Inc
Keypad Switch, 1 Switches, SPST, Momentary-tactile, 0.05A, 12VDC, 2.1N, Solder Terminal, Through Hole-right Angle
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | APEM COMPONENTS INC | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8536.50.90.40 | |
| Samacsys Manufacturer | Apem | |
| Actuator Type | PLUNGER TYPE | |
| Body Breadth | 6.55 mm | |
| Body Height | 7.2 mm | |
| Body Length or Diameter | 7.4 mm | |
| Circuit Configuration | 1X1 | |
| Contact Bounce Time-Max | 10 ms | |
| Contact Current(DC)-Max | 0.05 A | |
| Contact (DC) Max Rating R Load | .05A@12VDC | |
| Contact Resistance | 0.1 mΩ | |
| Contact Voltage(DC)-Max | 12 V | |
| Dielectric Withstand Volts | 250VAC V | |
| Electrical Life | 100000 Cycle(s) | |
| Insulation Resistance | 100000000 Ω | |
| Mounting Feature | THROUGH HOLE-RIGHT ANGLE | |
| Number of Switches | 1 | |
| Operating Force-Max | 2.1 N | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | -20 °C | |
| Packing Method | BAG | |
| Solderability | WAVE | |
| Surface Mount | NO | |
| Switch Action | MOMENTARY | |
| Switch Function | SPST | |
| Switch Type | KEYPAD SWITCH | |
| Termination Type | SOLDER |
Alternate Parts for PHAP3305A
This table gives cross-reference parts and alternative options found for PHAP3305A. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of PHAP3305A, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MJTP1236G | APEM Inc | $0.5835 | Keypad Switch, 1 Switches, SPST, Momentary-tactile, 0.05A, 12VDC, 1.86N, 4 PCB Hole Cnt, Solder Terminal, Through Hole-right Angle | PHAP3305A vs MJTP1236G |
| PHAP3305B | APEM Inc | Check for Price | Keypad Switch, 1 Switches, SPST, Momentary-tactile, 0.05A, 12VDC, 2.1N, Solder Terminal, Through Hole-right Angle | PHAP3305A vs PHAP3305B |
| MJTP1236A | APEM Inc | Check for Price | Keypad Switch, 1 Switches, SPST, Momentary-tactile, 0.05A, 12VDC, 1.86N, 4 PCB Hole Cnt, Solder Terminal, Through Hole-right Angle, | PHAP3305A vs MJTP1236A |
| MJTP1236B | APEM Inc | Check for Price | Keypad Switch, 1 Switches, SPST, Momentary-tactile, 0.05A, 12VDC, 1.86N, 4 PCB Hole Cnt, Solder Terminal, Through Hole-right Angle | PHAP3305A vs MJTP1236B |
PHAP3305A Frequently Asked Questions (FAQ)
-
APEM recommends a torque of 0.5 Nm to 1.5 Nm for the screw terminals to ensure reliable connections.
-
Yes, the PHAP3305A is designed to withstand vibrations up to 10g (IEC 60068-2-6) and can be used in high-vibration environments with proper mounting and installation.
-
To ensure EMI compliance, APEM recommends following proper PCB layout guidelines, using a metal shield or enclosure, and implementing EMI filtering components as needed.
-
APEM recommends storing the PHAP3305A at a temperature range of -20°C to 40°C to prevent damage and ensure reliability.
-
Yes, the PHAP3305A is designed to operate in humid environments with a relative humidity of up to 90% (non-condensing). However, it's essential to follow proper sealing and conformal coating guidelines to ensure reliability.