Part Details for PBA600F-24-C by Cosel USA Inc

Cosel recommends a PCB layout with a large copper area connected to the module's thermal pad to ensure efficient heat dissipation. A minimum of 2 oz copper thickness is recommended, and the copper area should be at least 1 inch x 1 inch in size.

Yes, the PBA600F-24-C is designed to withstand vibrations up to 10G peak acceleration, 10-2000 Hz frequency range, and 1.5 mm peak-to-peak amplitude. However, it's recommended to consult with Cosel's application engineers to ensure the module meets the specific vibration requirements of your application.

The input fuse should be sized based on the module's maximum input current rating, which is 10A for the PBA600F-24-C. A slow-blow fuse with a rating of 10A or higher is recommended to ensure the module's input stage is protected from overcurrent conditions.

Cosel recommends using a low-ESR, high-frequency ceramic capacitor with a value of 10uF to 22uF, and a voltage rating of 50V or higher. The capacitor should be placed as close as possible to the module's input pins to minimize noise and ensure stable operation.

Yes, the PBA600F-24-C can be used in a redundant or parallel configuration to achieve higher power output or to provide redundancy in critical applications. However, it's essential to consult with Cosel's application engineers to ensure the modules are properly configured and synchronized to avoid any potential issues.